Sony StorStation AITe200-UL Manuel utilisateur

2-067-134-13(1)

Operating Instructions

AIT Drive

AIT-2 Turbo TAPE DRIVE

AITe200-UL/AITe200T-UL

AIT-2 TAPE DRIVE

AITe130V-UL

AIT-1 Turbo TAPE DRIVE

AITe100-UL/AITe100T-UL

AIT-1 TAPE DRIVE

AITe90V-UL

2Safety Regulations

Safety Regulations

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial

number in the space provided below.

Refer to them whenever you call upon your dealer regarding this product.

Model No. Serial No.

Information

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

MODEL No. for Regulatory Compliance

Your AITe200-UL or AITe200T-UL is assigned the MODEL No.

ATDEA3A (respectively) for regulatory compliance certifications. Your

AITe130V-UL, AITe100-UL, AITe100T-UL or AITe90V-UL is assigned the

MODEL No. ATDEA2A (respectively) for regulatory compliance

certifications. The number is indicated on the model number label on your

drive along with the rated voltage and current.

For customers in the USA

You are cautioned that any changes or modifications not expressly approved

in this manual could void your authority to operate this equipment.

FCC Compliance

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

All interface cables used to connect peripherals must be shielded in order to

comply with the limits for a digital device pursuant to Subpart B of Part 15 of

FCC Rules.

Safety Regulations 3

CAUTION

The mains plug on this equipment must be used to disconnect mains power.

Please ensure that the socket outlet is installed near the equipment and shall

be easily accessible.

ACHTUNG

Zur Trennung vom Netz ist der Netzstecker aus der Steckdose zu ziehen,

welche sich in der Nähe des Gerätes befinden muß und leicht zugänglich

sein soll.

Hinweis: Maschinenlärminformations-Verordnung - 3. GPSGV, der

höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO

7779.

NOTICE

Use the power cord set approved by the appropriate testing organization for

the specific countries where this unit is to be used.

HINWEIS

Zum Netzanschluß dieses Gerätes ist eine geprüfte Leitung zu verwenden.

Es sind die zutreffenden nationalen Errichtungs- und/oder

Gerätebestimmungen zu beachten. (Für einen Nennstrom bis 6A)

Es ist eine geprüfte flexible PVC-ummantelte Leitung entsprechend IEC

60227 (H05VV-F 3G 0,75 mm2oder H05VVH2-F 3G 0,75 mm2) zu

verwenden. Andernfalls ist eine flexible Leitung aus synthetischem Gummi

entsprechend IEC 60245 (Bauartkurzzeichen H05RR-F 3G 0,75 mm2) zu

verwenden.

If you have any questions about this product, please refer to Sony contact in

the instruction manual.

DECLARATION OF CONFORMITY

Trade Name: SONY

Model: ATDEA2A, ATDEA3A

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo San Diego, CA.

92127 U.S.A.

Telephone number: 858-942-2230

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Für kunden in Deutschland

Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die

Verwendung in folgender/folgenden Umgebung(en):

–Wohngegenden

–Gewerbegebiete

–Leichtindustriegebiete

(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN 55022, Klasse B.)

4Safety Regulations

ATTENTION

According to the EU Directives related to product safety, EMC and R&TTE the

manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku

Tokyo, 108-0075 Japan. The Authorised Representative is Sony Deutschland

GmbH, Hedelfinger Strasse 61,70327 Stuttgart, Germany. For any service or

guarantee matters please refer to the addresses given in separate service or

guarantee documents.

AUFMERKSAMKEIT

Im Sinne der EU Richtlinien bezüglich Produktsicherheit, EMV und R&TTE

ist Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan der

Hersteller dieses Produktes. Bevollmächtigter ist Sony Deutschland GmbH,

Hedelfinger Strasse 61, D-70327 Stuttgart. Für Service oder

Garantieangelegenheiten wenden Sie sich bitte an die in separaten Service

oder Garantiedokumenten angegebenen Adressen.

European Union Restriction of Hazardous Substances Directive

compliant.

Entspricht der Richtlinie der Europäischen Union zur

Beschränkung der Verwendung gefährlicher Stoffe.

Safety Regulations 5

IMPORTANT SAFEGUARDS

For your protection, please read these safety

instructions completely before operating the

appliance, and keep this manual for future reference.

Carefully observe all warnings, precautions and

instructions on the appliance, or the one described in

the operating instructions and adhere to them.

USE

Power Sources – This unit should be operated only

from the type of power source indicated on the

marking label. If you are not sure of the type of

electrical power, consult your dealer or local power

company.

For the unit with a three-wire grounding type ac

plug:

If you are unable to insert the plug into the outlet,

contact your electrician to have a suitable plug

installed. Do not defeat the safety purpose of the

grounding plug.

AC Power cord:

The AC power cord should have appropriate safety

approvals or marking for the country in which the

equipment will be used. Consult your dealer or

local power company.

Cleaning – Unplug the unit from the wall outlet

before cleaning or polishing it. Do not use liquid

cleaners or aerosol cleaners.

Use a cloth lightly dampened with water for

cleaning the exterior of the unit.

Object and Liquid Entry – Never push objects of any

kind into the unit through openings as they may

touch dangerous voltage points or short out parts

that could result in a fire or electric shock. Never

spill liquid of any kind on the unit.

6Safety Regulations

INSTALLATION

Water and Moisture – Do not use power-line

operated units near water - for example, near a

bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, etc.

Power-Cord Protection – Route the power cord so

that it is not likely to be walked on or pinched by

items placed upon or against them, paying particular

attention to the plugs, receptacles, and the point

where the cord exits from the appliance.

Accessories – Do not place the unit on an unstable

cart, stand, tripod, bracket, or table. The unit may

fall, causing serious injury to a child or an adult, and

serious damage to the unit. Use only a cart stand

tripod, bracket, or table recommended by the

manufacturer.

Ventilation – The slots and openings in the cabinet

are provided for necessary ventilation. To ensure

reliable operation of the unit, and to protect it from

overheating, these slots and openings must never be

blocked or covered.

•Never cover the slots and openings with a cloth or

other materials.

•Never block the slots and openings by placing the

unit on a bed, sofa, rug or other similar surface.

•Never place the unit in a confined space, such as a

bookcase, or built-in cabinet, unless proper

ventilation is provided.

SERVICE

Damage Requiring Service – Unplug the unit from

the wall outlet and refer servicing to qualified

service personnel under the following conditions:

•When the power cord or plug is damaged or

frayed.

•If liquid has been spilled or objects have fallen

into the unit.

•If the unit has been exposed to rain or water.

•If the unit has been subject to excessive shock by

being dropped, or the cabinet has been damaged.

•If the unit does not operate normally when

following the operating instructions. Adjust only

those controls that are specified in the operating

instructions. Improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the unit to normal operation.

• When the unit exhibits a distinct change in

performance - this indicates a need for service.

Servicing – Do not attempt to service the unit

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards.

Refer to all servicing to qualified service personnel.

Table of Contents 7

• Sony cannot accept liability for data written to cartridges lost as a result of using this product.

• Sony bears no responsibility for any financial damages, lost profits, or claims made by third parties

arising from the use of this product.

Table of Contents

How To Use This Guide .................................................................... 8

Chapter 1

Introduction

About the AIT Drive........................................................................... 9

Features .................................................................................................... 9

System Requirements ............................................................................ 11

Compatible Data Cartridges .................................................................. 11

Part Names and Functions ............................................................. 13

Front Panel ............................................................................................. 13

Rear Panel .............................................................................................. 14

Chapter 2

Preparation

Supplied Items................................................................................. 15

Interconnections ............................................................................. 16

Option Switches (DIP Switch) ........................................................ 17

i.LINK ................................................................................................... 19

Chapter 3

Operation

How To Use the AIT Drive .............................................................. 21

Cartridge Removal ................................................................................. 22

Attaching the Dust Cover ............................................................... 23

Chapter 4

Care and

Maintenance

Taking Care of the Drives ............................................................... 25

Safety Considerations ............................................................................ 25

Avoiding Damage .................................................................................. 25

Taking Care of Cartridges .............................................................. 27

Usage Precautions ................................................................................. 27

Storage Precautions ............................................................................... 27

Cleaning ........................................................................................... 28

How To Clean ........................................................................................ 28

Appendix Specifications .................................................................................. 29

Sony Contacts ................................................................................. 33

8How to Use this Guide

How To Use This Guide

This guide describes how to use and care for the AITe200-UL, AITe200T-UL,

AITe130V-UL, AITe100-UL, AITe100T-UL or AITe90V-UL. Please read it

carefully before using the drives and save it for future reference.

The guide consists of four chapters and an appendix. Refer to the chapters

that relate to your use of the drives.

Chapter 1 Introduction

Describes the features of the drives, system requirements, and the names and

functions of each part.

Chapter 2 Preparation

Describes the necessary connections between the drives and the host

computer. Read this chapter when you install the drives.

Chapter 3 Operation

Describes how to use the drives, including how to turn it on, and how to

insert and remove cartridges. Read this chapter when you are going to use the

drives.

Chapter 4 Care and Maintenance

Describes how to take care of the drives and cartridges, and how to clean the

drive. Read this chapter before using the drives.

Appendix

Contains the specifications of the drives.

Notation

IEEE 1394 and i.LINK refer to the same type of interface. In this guide, we

have used i.LINK throughout to refer to the interface.

Trademarks

• Microsoft and Windows are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• i.LINK™ is a designation referring to IEEE 1394-1995 and IEEE 1394a-

2000. i.LINK and the i.LINK logo “ ” are trademarks of Sony

Corporation.

• All other system names, products, and services are either registered

trademarks or trademarks of their respective owners. The ™ or ® marks do

not appear in this manual.

Chapter 1 Introduction 9

Chapter 1 Introduction

About the AIT Drive

The AITe200-UL is an external AIT drive using data cartridges that conform

to the AIT-2 Turbo, AIT-2, AIT-1 Turbo, AIT-1, and AIT-E Turbo formats.

The AITe130V-UL is an external AIT-2 drive using data cartridges that

conform to the AIT-2 and AIT-1 formats.

The AITe100-UL is an external AIT drive using data cartridges that conform

to the AIT-1 Turbo, AIT-1, and AIT-E Turbo formats.

The AITe90V-UL is an external AIT drive using data cartridges that conform

to the AIT-1 format.

Features

The AITe200-UL drive has the following features.

•Uses the Advanced Intelligent Tape (AIT) format AIT-2 Turbo, AIT-2,

AIT-1 Turbo, AIT-1, and AIT-E Turbo data cartridges. AIT-2 Turbo data

cartridges provide 80 GB of storage (no compression) on a 186-m tape.

AIT-2 data cartridges provide 50 GB of storage (no compression) on a

230-m tape. AIT-1 Turbo data cartridges provide 40 GB of storage (no

compression) on a 186-m tape. AIT-1 data cartridges provide 35 GB of

storage (no compression) on a 230-m tape. AIT-E Turbo data cartridges

provide 20 GB of storage (no compression) on a 98-m tape. The Read After

Write function and Third Level Error Correction Code ensure high data

reliability.

•The drive comes with a data compression function, providing a maximum

of 208 GB of storage on an AIT-2 Turbo data cartridge (186-m tape), 130

GB of storage on an AIT-2 data cartridge (230-m tape), 104 GB on an AIT-

1 Turbo data cartridge (186-m tape), 91 GB on an AIT-1 data cartridge

(230-m tape), and 52 GB on an AIT-E Turbo data cartridge (98-m tape).*1

The AITe130V-UL drive has the following features.

•Uses the Advanced Intelligent Tape (AIT) format AIT-2 and AIT-1 data

cartridges. AIT-2 data cartridges provide 50 GB of storage (no

compression) on a 230-m tape. AIT-1 data cartridges provide 35 GB of

storage (no compression) on a 230-m tape. The Read After Write function

and Third Level Error Correction Code ensure high data reliability.

•The drive comes with a data compression function, providing a maximum

of 130 GB of storage on an AIT-2 data cartridge (230-m tape) and 91 GB

on an AIT-1 data cartridge (230-m tape).*1

*1 Assuming a 2.6:1 hardware compression ratio.

The actual degree of compression during recording depends on the system environment and

the type of data.

10 Chapter 1 Introduction

The AITe100-UL drive has the following features.

•Uses the Advanced Intelligent Tape (AIT) format AIT-1 Turbo, AIT-1, and

AIT-E Turbo data cartridges. AIT-1 Turbo data cartridges provide 40 GB of

storage (no compression) on a 186-m tape. AIT-1 data cartridges provide

35 GB of storage (no compressio on a 230-m tape. AIT-E Turbo data

cartridges provide 20 GB of storage (no compression) on a 98-m tape. The

Read After Write function and Third Level Error Correction Code ensure

high data reliability.

•The drive comes with a data compression function, providing a maximum

of 104 GB on an AIT-1 Turbo data cartridge (186-m tape), 91 GB on an

AIT-1 data cartridge (230-m tape), and 52 GB on an AIT-E Turbo data

cartridge (98-m tape).*1

The AITe90V-UL drive has the following features.

•Uses the Advanced Intelligent Tape (AIT) format AIT-1 data cartridges.

AIT-1 data cartridges provide 35 GB of storage (no compression) on a

230-m tape. The Read After Write function and Third Level Error

Correction Code ensure high data reliability.

•The drive comes with a data compression function, providing a maximum

of 91 GB of storage on an AIT-1 data cartridge (230-m tape).*1

Stored data is automatically checked for compression. The drive can also

read data recorded with other devices.

The drive is equipped with a USB and i.LINK (IEEE 1394) interface. You

can therefore connect the drive to either connector to your computer.

Note

You cannot use the USB and i.LINK interfaces simultaneously.

The drives support Hot Plug, which means that you can connect and

disconnect it while the drives and/or your computer is on.

To remove the AIT drive, execute “Safely Remove Hardware” on the

Windows taskbar, and then disconnect the AIT drive.

*1 Assuming a 2.6:1 hardware compression ratio.

The actual degree of compression during recording depends on the system environment and

the type of data.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Stockage

Sony

Sony HDD Manuel utilisateur

Sony

Sony MS-JX8G Manuel utilisateur

Sony

Sony MSAC-US5 Manuel utilisateur

Sony

Sony MICROVAULT USM-N Series Manuel utilisateur

Sony

Sony StorStation LIB-D81 Manuel de l'opérateur

Sony

Sony SDT-9000 Series Manuel utilisateur

Sony

Sony SDX-S500C Manuel

Sony

Sony DDS-4 Manuel utilisateur

Sony

Sony BKMA-U55 Manuel utilisateur

Sony

Sony AITe90-UL Manuel utilisateur

Sony

Sony MSAC-US40 - MemoryStick Flash Memory Card USB 2.0... Manuel utilisateur

Sony

Sony HD-EG5U Manuel utilisateur

Sony

Sony SDX-D550V Manuel

Sony

Sony ODS-L10 Manuel utilisateur

Sony

Sony BKMA-U70 Manuel utilisateur

Sony

Sony PetaSite DMS-B150L Manuel utilisateur

Sony

Sony VAIO PCGA-CDRWX1 Manuel utilisateur

Sony

Sony StorStation AITi100 Manuel utilisateur

Sony

Sony SRR1000 Manuel utilisateur

Sony

Sony M2 MS-A Series Manuel utilisateur

Sony

Sony SDX-500V Manuel utilisateur

Sony

Sony MS-MT16G Manuel utilisateur

Sony

Sony MSX-M1GS Operating Instructions (Memory Stick... Manuel utilisateur

Sony

Sony Personal Content Station LLS-201 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur