Sony SDX-500V Manuel utilisateur
AIT Drive
4-680-373-11(1)
2003 Sony Corporation
AIT-2 TAPE DRIVE
SDX-500V
AIT-1 TAPE DRIVE
SDX-400V
User’s Guide
2
This document contains proprietary
information which is protected by
copyright.
All rights reserved. No part of this
document may be photocopied,
reproduced or translated to another
language without prior written consent
of Sony.
The information contained in this
document is subject to change without
notice.
SONY MAKES NO WARRANTY
OF ANY KIND WITH REGARD TO
THIS DOCUMENT.
Sony shall not be liable for errors
contained herein, indirect, special,
incidental or consequential damages in
connection with the furnishing,
performance or use of this document.
Your AIT TAPE DRIVE is assigned a
Model No. ATDNA2 for regulatory
compliance certifications.
The number is indicated on the model
number label on your drive along with
the rated voltoge and current.
VORSICHT
Diese Ausrüstung erfüllt die
Europäischen EMC-Bestimmungen für
die Verwendung in folgender /
folgenden Umgebung(en):
• Wohngegenden
• Gewerbegebiete
• Leichtindustriegebiete
(Diese Ausrüstung erfüllt die
Bestimmungen der Norm EN55022,
Klasse B.)
3
IMPORTANT SAFEGUARDS
For your protection, please read these
safety instructions completely before
operating the appliance, and keep this
manual for future reference.
Carefully observe all warnings,
precautions and instructions on the
appliance, or the one described in the
operating instructions and adhere to
them.
USE
Power Sources –This unit should be
operated only from the type of power
source indicated on the marking label.
If you are not sure of the type of
electrical power, consult your dealer or
local power company.
For the unit with a three-wire
grounding type ac plug:
If you are unable to insert the plug into
the outlet, contact your electrician to
have a suitable plug installed. Do not
defeat the safety purpose of the
grounding plug.
AC Power cord: (for AC mains
operating unit only)
The AC power cord should have
appropriate safety approvals or
marking for the country in which the
equipment will be used. Consult your
dealer or local power company.
Cleaning –Unplug the unit from the
wall outlet before cleaning or
polishing it. Do not use liquid
cleaners or aerosol cleaners.
Use a cloth lightly dampened with
water for cleaning the exterior of the
unit.
Object and Liquid Entry –Never
push objects of any kind into the unit
through openings as they may touch
dangerous voltage points or short out
parts that could result in a fire or
electric shock. Never spill liquid of
any kind on the unit.
4
INSTALLATION
Water and Moisture –Do not use
power-line operated units near water -
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a
swimming pool, etc.
Power-Cord Protection –Route the
power cord so that it is not likely to be
walked on or pinched by items placed
upon or against them, paying
particular attention to the plugs,
receptacles, and the point where the
cord exits from the appliance.
Accessories –Do not place the unit on
an unstable cart, stand, tripod, bracket,
or table. The unit may fall, causing
serious injury to a child or an adult,
and serious damage to the unit. Use
only a cart stand tripod, bracket, or
table recommended by the
manufacturer.
Ventilation –The slots and openings
in the cabinet are provided for
necessary ventilation. To ensure
reliable operation of the unit, and to
protect it from overheating, these slots
and openings must never be blocked or
covered.
• Never cover the slots and openings
with a cloth or other materials.
• Never block the slots and openings
by placing the unit on a bed, sofa,
rug or other similar surface.
• Never place the unit in a confined
space, such as a bookcase, or built-
in cabinet, unless proper ventilation
is provided.
SERVICE
Damage Requiring Service –Unplug
the unit from the wall outlet and refer
servicing to qualified service
personnel under the following
conditions:
• When the power cord or plug is
damaged or frayed.
• If liquid has been spilled or objects
have fallen into the unit.
• If the unit has been exposed to rain
or water.
• If the unit has been subject to
excessive shock by being dropped,
or the cabinet has been damaged.
• If the unit does not operate normally
when following the operating
instructions. Adjust only those
controls that are specified in the
operating instructions. Improper
adjustment of other controls may
result in damage and will often
require extensive work by a
qualified technician to restore the
unit to normal operation.
• When the unit exhibits a distinct
change in performance - this
indicates a need for service.
Servicing –Do not attempt to service
the unit yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer to all servicing to qualified
service personnel.
5
Contents
Overview ..................................................................................................................6
Introduction ..............................................................................................................7
About AIT Drives ............................................................................................7
Precautions .......................................................................................................8
Installation ..............................................................................................................10
SCSI Connection/Setting the SCSI ID ...........................................................10
Option Switches (DIP Switch) .......................................................................11
Mounting Holes..............................................................................................13
Reconfiguring from 5.25" Model to 3.5" Model............................................14
Orientation......................................................................................................15
Attaching and Removing the Dust Cover...............................................................16
Attaching the Dust Cover...............................................................................16
Removing the Dust Cover .............................................................................. 18
Operation ................................................................................................................19
Location of 3 LEDs ........................................................................................ 19
Drive Operation..............................................................................................20
Emergency Tape Removal Procedure ............................................................ 22
WORM Function .................................................................................................... 24
Interface Implementation........................................................................................26
Supported SCSI Messages .............................................................................26
Supported SCSI Commands...........................................................................26
Specifications .........................................................................................................27
Product Specifications....................................................................................27
Sony Contacts .........................................................................................................30
For further information, please contact:.........................................................30
6
Overview
The Sony SDX-500V and SDX-400V drives are high capacity data storage
devices using Advanced Intelligent tape (AIT) technology. The SDX-500V
and SDX-400V drives achieve high data reliability through Read-After-
Write, an additional level of Error Correction Code, and other features.
The Sony SDX-500V and SDX-400V drives store data on tape using
standard formats called AIT (Advanced Intelligent Tape) and ALDC
formats.
7
Introduction
About AIT Drives
The SDX-500V is an internal AIT drive unit that uses data cartridges
conforming to the AIT-2 format. The SDX-400V is an internal AIT drive
unit that uses data cartridges conforming to the AIT-1 format. The SDX-
500V supports AIT-1 and AIT-2 formats. The SDX-400V supports only
AIT-1 format.
Features
The AIT Drive Unit SDX-500V has the following features:
•Supports reading and writing to data cartridges conforming to the AIT-1
and AIT-2 formats.
•Read After Write Function and third-level error correction code
guarantee high data reliability.
•Data compression provides 130 gigabytes of storage on 230 m tape-
length cartridge.*1
The native capacity is 50 gigabytes of storage on 230 m tape-length
cartridge.
•Stored data are automatically checked for compression.
•Wide Ultra SCSI LVD/SE interface is fully supported for host computer
access.
The AIT Drive Unit SDX-400V has the following features:
•Supports reading and writing to data cartridges conforming to the AIT-1
format.
•Read After Write Function and third-level error correction code
guarantee high data reliability.
•Data compression provides 91 gigabytes of storage on 230 m tape-length
cartridge.*1
The native capacity is 35 gigabytes of storage on 230 m tape-length
cartridge.
•Stored data are automatically checked for compression.
•Wide Ultra SCSI LVD/SE interface is fully supported for host computer
access.
*1 This is assuming 2.6 : 1 compression ratio.
The degree of data compression attained while recording data varies according to
system environment and data type.
8
Precautions
Installation
Avoid placing the drive in a location subject to:
–high humidity
–high temperature
–mechanical shock and vibration
–direct sunlight
*For details, see “Specifications”on page 27.
Operation
•Do not move the drive while it is operating. It may cause malfunction.
•Avoid exposing the drive to sudden changes from a low to high
temperatures. This may cause water condensation to collect inside the
drive. If the ambient temperature should suddenly rise while the drive is
turned on, wait at least one hour before turning on the drive. If you
attempt to operate the drive immediately after a sudden increase in
temperature, a malfunction may occur.
•Turning off the power to the drive while it is writing to tape may cause
the tape to become unreadable. All previously negotiated parameters will
be lost, whenever power to the drive is cycled.
Transportation
•Keep the original packing materials to facilitate safe transportation of the
drive.
•Always remove the tape/media cartridge before moving the drive. After
removing the drive from the computer, repack the drive into its original
packing.
9
SCSI Termination
The SDX-500V and SDX-400V conform to the Microsoft PC97 standard
which requires the internal (naked) drive to be terminated with an internal
terminator.
Microsoft PC97 SCSI requirements
SCSI peripherals must not terminate the bus. Both internal and external cable ends are
instead terminated by plug-in connectors.
Terminato
r
68p cable
Host Computer Wide SCSI
This drive
Example of SCSI setup
10
Installation
SCSI Connection/Setting the SCSI ID
SCSI 68pin Connector
5 V
Power Connector
1234
GND GND 12 V
Disable
Enable
Parity
Note :
=
=
= CLOSED/Jumper
Don’t care
OPEN/Jumper not
installed
Parity Disable
No Connection
SCSI ID 3
SCSI ID 2
SCSI ID 1
SCSI ID 0
Jumpers
SCSI ID
SCSI ID
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
1
0
P.D.
N.C.
3
Parity Disable Jumper
Parity check function can be disabled by Jumper. Parity check is disabled
while left end jumper is installed. Parity generate function is always
enabled.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Sony Stockage
Sony
Sony VAIO PCGA-CDRWX1 Manuel utilisateur
Sony
Sony MicroVault USM1GJ Manuel utilisateur
Sony
Sony VGC-RA710G Mode d’emploi
Sony
Sony USM64C Manuel utilisateur
Sony
Sony CompactFlash NCFB1G Manuel utilisateur
Sony
Sony 1GN Manuel utilisateur
Sony
Sony MicroVault USM4GM Manuel utilisateur
Sony
Sony PetaSite DMS-B150L Manuel utilisateur
Sony
Sony SDT-S11000 Manuel utilisateur
Sony
Sony RMO-S551 Manuel utilisateur
Sony
Sony SRR1000 Manuel utilisateur
Sony
Sony SAITe1300-F Manuel utilisateur
Sony
Sony Memory Stick PRO-HG Duo HX Series Manuel utilisateur
Sony
Sony VAIO VGP-UHDM08 Manuel utilisateur
Sony
Sony SDX-260V Series Manuel utilisateur
Sony
Sony AITE260 - AIT E260/S Tape Drive Manuel utilisateur
Sony
Sony StorStation AITi200-ST Manuel utilisateur
Sony
Sony PMW-RX50 Manuel utilisateur
Sony
Sony HD-E Series Manuel utilisateur
Sony
Sony SRMASTER SRPC-5 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur