PeakTech 5160 Manuel utilisateur

PeakTech

® 5160

Bedienungsanleitung /

Operation Manual

Lufttemperatur & -Feuchtigkeitsmessgerät /

Air Temperature & Humidity Meter

1. Safety precautions

This product complies with the requirements of the following

directives of the European Union for CE conformity: 2014/30/EU

(electromagnetic compatibility), 2011/65/EU (RoHS).

The following safety precautions must be observed before

operation. Damages resulting from failure to observe these safety

precautions are exempt from any legal claims whatever:

* Comply with the warning labels and other info on the

equipment.

* Do not subject the equipment to direct sunlight or extreme

temperatures, humidity or dampness.

* Do not subject the equipment to shocks or strong vibrations.

* Do not operate the equipment near strong magnetic fields

(motors, transformers etc.).

* Keep hot soldering irons or guns away from the equipment.

* Allow the equipment to stabilize at room temperature before

taking up measurement (important for exact measurements).

*Replace the battery as soon as the battery indicator “ ”

appears. With a low battery, the meter might produce false

reading that can lead to electric shock and personal injury.

* Fetch out the battery when the meter will not be used for long

period.

* Periodically wipe the cabinet with a damp cloth and mid

detergent. Do not use abrasives or solvents.

* Do not operate the meter before the cabinet has been closed

and screwed safely as terminal can carry voltage.

* Do not store the meter in a place of explosive, inflammable

substances.

* Do not modify the meter in any way.

* Opening the equipment and service- and repair work must only

be performed by qualified service personnel.

* Measuring instruments don’t belong to children hands.

-10-

Cleaning the cabinet

Clean only with a damp, soft cloth and a commercially available

mild householder cleanser. Ensure that no water gets inside the

equipment to prevent possible shorts and damage to the

equipment.

Introduction

This newly developed instrument measures the current humidity,

as well as the current air temperature installed a set of sensors for

fast and accurate evaluation of the measurement results.

2. Features

►3 -digit 10mm LCD display (max. 999)

►Automatic backlight

►Humidity measurement in %R. H.

►Air temperature in °C or °F

►Fast response time of the sensor

►Rugged and compact housing design

►Data hold

-11-

3. Specifications

Display

LCD with automatic backlight

Measurement

Range

R.H.:

Temp. :

10% ~ 99%

-10°C ~ 50°C

(14°F ~ 122°F)

Resolution:

R.H.:

Temperatur:

0.1 %RH

0,1 °C

Accuracy

%R.H.:

Temperatur:

+/- 5,0%

(at 25°C; 10~30%RH)

+/- 3,0%

(at 25°C; 30~99%RH)

+/- 1°C

(+/- 2.6°F)

Measuring Rate

2 x / second

Low Battery

Indication

Symbol “ “ shown in the display, if

battery voltage is low

Auto Power Off

After 10 Minutes

DATA-HOLD

Holds measurement value in display

Power Supply

9V battery, 6F22 or equivalent

Operating

Environment

-10°C ~ 40°C; <99% RH

Storage

Environment

-10°C ~ 60°C; <70% RH

Size (WxHxD)

55 x 145 x 35mm

Weight

158g

-12-

4. Panel Description

1) Temperature / Humidity Sensor

2.) ON - Power switch

3.) Temp. / Humidity - button

4.) HOLD - button

5.) Brightness sensor

6.) Measured value display

7.) Battery compartment (rear)

8.) Thread for tripod (rear)

-13-

4.1. Display Symbols

This icon indicates the battery status. An empty

battery must be replaced as soon as possible and

affect the measurement results negatively

HOLD

Data-Hold: Keeps the current value in display

Percent (unit of Relative Humidity)

Celsius degree

Fahrenheit degree

5. Operating Instruction

1. Press the "ON" button to turn on the unit.

2. Select the desired measurement function:

Select the measurement function with the option key (3) on the

device’s side.

The three possible measurement functions are:

% R.H. (Relative Humidity)

°C Temperature Measurement

°F Temperature Measurement

After the desired measurement function is selected, the device

automatically switches from the selection mode to measuring mode

and you can start your measurements.

-14-

6. Performing Measurement

General:

1. Temperature measurement:

The display shows the air temperature in °C/°F.

2. Humidity measurement:

The display shows the relative humidity in %RH.

Humidity refers to the amount of water vapor at room or

ambient air.

3. To "freeze" the current reading press the "HOLD" - button.

The display stops updating the measured values and the

"HOLD" - symbol appears.

Automatic Power Off:

If the device is no longer used, it will automatically turn off after 10

minutes.

Backlight:

This unit features an automatic backlight, which activates the

backlight when the light sensor on the front panel detects low light

conditions.

-15-

7. Battery Replacement

If the sign “ ” appears on the LCD display, it indicates that the

battery should be replaced.

Remove the back cover and open the battery compartment.

Replace the exhausted battery with new battery.

Batteries, which are used up dispose duly. Used up batteries are

hazardous and must be given in the - for this being supposed -

collective container.

NOTE

1. Keep the instrument dry.

2. Keep the probes clean.

3. Keep the instrument and battery out of reach of infant and

child.

4. When the symbol ” ” appears, the battery is low and should

be replaced immediately. When you install battery, ensure the

polarity connections are correct. If you will not use the

instrument in a long period of time, remove the battery.

-16-

7.1. Notification about the Battery Regulation

The delivery of many devices includes batteries, which for example

serve to operate the remote control. There also could be batteries

or accumulators built into the device itself. In connection with the

sale of these batteries or accumulators, we are obliged under the

Battery Regulations to notify our customers of the following:

Please dispose of oldbatteries at a council collection pointor return

them to a local shop at no cost. The disposal in domestic refuse is

strictly forbidden according to the Battery Regulations. You can

return used batteries obtained from us at no charge at the address

on the last side in this manual or by posting with sufficient stamps.

Contaminated batteries shall be marked with a symbol consisting

of a crossed-out refuse bin and thechemical symbol (Cd, Hg or Pb)

of the heavy metal which is responsible for the classification as

pollutant:

1. "Cd" means cadmium.

2. "Hg" means mercury.

3. "Pb" stands for lead.

-17-

All rights, also for translation, reprinting and copy of this manual

or parts are reserved.

Reproductions of all kinds (photocopy, microfilm or other) only by

written permission of the publisher.

This manual is according the latest technical knowing. Technical

alterations reserved.

We herewith confirm that the unit is calibrated by the factory

according to the specifications as per the technical specifications.

We recommend to calibrate the unit again, after one year.

Autres manuels pour 5160

Table des matières

Autres manuels PeakTech Instrument de mesure

PeakTech

PeakTech 1095 Manuel utilisateur

PeakTech

PeakTech 2705 Manuel utilisateur

PeakTech

PeakTech 3296 Manuel utilisateur

PeakTech

PeakTech 5165 Manuel utilisateur

PeakTech

PeakTech 5225 Manuel utilisateur

PeakTech

PeakTech 1655 Manuel utilisateur

PeakTech

PeakTech 1650 Manuel utilisateur

PeakTech

PeakTech 1640 Manuel utilisateur

PeakTech

PeakTech 5201 Manuel utilisateur

PeakTech

PeakTech 5040 Manuel utilisateur

PeakTech

PeakTech 1090 Manuel utilisateur

PeakTech

PeakTech 3260 Manuel d'installation

PeakTech

PeakTech 9035 Manuel utilisateur

PeakTech

PeakTech 4145 Manuel utilisateur

PeakTech

PeakTech 4350 Manuel utilisateur

PeakTech

PeakTech 1635 Manuel utilisateur

PeakTech

PeakTech 5201 Manuel utilisateur

PeakTech

PeakTech 1010 Manuel utilisateur

PeakTech

PeakTech 1040 Manuel utilisateur

PeakTech

PeakTech 1636 Manuel utilisateur

PeakTech

PeakTech 9015 Manuel utilisateur

PeakTech

PeakTech 5085 Manuel utilisateur

PeakTech

PeakTech 1235 Manuel utilisateur

PeakTech

PeakTech 1645 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur