Panasonic Transistors 2SA2078G Manuel utilisateur

Transistors

Publication date: May 2007 SJC00382AED

This product complies with the RoHS Directive (EU 2002/95/EC).

2SA2078G

Silicon PNP epitaxial planar type

For general amplification

Complementary to 2SC5846G

■Features

•High forward current transfer ratio hFE

•SSS-Mini type package, allowing downsizing of the equipment

and automatic insertion through the tape packing and the maga-

zine packing.

■Absolute Maximum Ratings Ta=25°C

Parameter Symbol Rating Unit

Collector-base voltage (Emitter open) VCBO −60 V

Collector-emitter voltage (Base open) VCEO −50 V

Emitter-base voltage (Collector open) VEBO −7V

Collector current IC−100 mA

Peak collector current ICP −200 mA

Collector power dissipation PC100 mW

Junction temperature Tj125 °C

Storage temperature Tstg −55 to +125 °C

Parameter Symbol Conditions Min Typ Max Unit

Collector-base voltage (Emitter open) VCBO IC=−10 µA, IE=0 −60 V

Collector-emitter voltage (Base open) VCEO IC=−100 µA, IB=0 −50 V

Emitter-base voltage (Collector open) VEBO IE=−10 µA, IC=0 −7V

Collector-base cutoff current (Emitter open)

ICBO VCB =−20 V, IE=0 −0.1 µA

Collector-emitter cutoff current (Base open)

ICEO VCE =−10 V, IB=0 −100 µA

Forward current transfer ratio hFE VCE =−10 V, IC=−2 mA 180 390 

Collector-emitter saturation voltage VCE(sat) IC=−100 mA, IB=−10 mA −0.2 −0.5 V

Transition frequency fTVCB =−10 V, IE=1 mA, f =200 MHz 80 MHz

Collector output capacitance Cob VCB =−10 V, IE=0, f =1 MHz 2.2 pF

(Common base, input open circuited)

■Electrical Characteristics Ta=25°C ±3°C

Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

■Package

•Code

SSSMini3-F2

•Marking Symbol: 7H

•Pin Name

1. Base

2. Emitter

3. Collector

2SA2078G

2SJC00382AED

This product complies with the RoHS Directive (EU 2002/95/EC).

IBVBE ICVBE VCE(sat) IC

PCTaICVCE ICIB

hFE ICCob VCB

Collector power dissipation P

(mW)

Ambient temperature T

(°C)

020 40 60 80 100 120 140

100

120

Collector current IC(mA)

Collector-emitter voltage VCE (V)

−10

−20

−30

−40

−50

−60

0−2−4−6−8−10 −12

= −300 µA

−250 µA

−200 µA

−150 µA

−100 µA

−50 µA

=25°C

Base current IB(mA)

Collector current IC(mA)

0− 0.2 − 0.4 − 0.6 − 0.8 −1.0 −1.2

−140

−120

−100

−80

−60

−40

−20

=−10 V

=25°C

Base-emitter voltage VBE (V)

Base current IB(mA)

0− 0.8−0.2 −0.4 − 0.6

−1.0

−2.0

−2.5

−3.0

−3.5

− 0.5

−1.5

=−10 V

=25°C

Base-emitter voltage V

(V)

Collector current I

(mA)

0−0.4

−0.2 −1.0 −1.2

−0.8

−0.6

−20

−40

−60

−80

−100

−120

=75°C

25°C

−25°C

=−10 V

Collector-emitter saturation voltage V

CE(sat)

(V)

Collector current I

(mA)

=75°C

25°C

−25°C

−1−10 −100

−0.01

−0.1

−1I

/ I

=10

Forward current transfer ratio hFE

Collector current IC(mA)

−1−10 −100

−1 000

300

250

200

150

100

=75°C

25°C

−25°C

=−10 V

Collector-base voltage V

(V)

Collector output capacitance

(Common base, input open circuited) C

(pF)

−8−16 −24 −32 −40

f =1 MHz

=25°C

This product complies with the RoHS Directive (EU 2002/95/EC).

SSSMini3-F2 Unit: mm

0.30 +0.05

−0.02

0.20 +0.05

−0.02 0.13 +0.05

−0.02

(0.4)

0.80 ±0.05

0.51 ±0.04

1.20 ±0.05

0.20 ±0.05

(0.27)

5°

0 to 0.05 (0.5)

5°

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Autres manuels Panasonic Matériel réseau

Panasonic

Panasonic Chip RC Networks EZACT Guide de l'utilisateur

Panasonic

Panasonic PN54021K Manuel utilisateur

Panasonic

Panasonic Zener Diodes MAZQxxx Series Manuel utilisateur

Panasonic

Panasonic Transistors 2SD1823 Manuel utilisateur

Panasonic

Panasonic Photo IC PNA4601M Manuel utilisateur

Panasonic

Panasonic Zener Diodes MAZSxxxG Series Manuel utilisateur

Panasonic

Panasonic PIN Photodiodes PNZ334 (PN334) Manuel utilisateur

Panasonic

Panasonic Rectifier Diodes MA2J115 (MA115) Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA3X727 (MA727) Manuel utilisateur

Panasonic

Panasonic Multi Chip Discrete UP05C8GF Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3931G Manuel utilisateur

Panasonic

Panasonic WJ-PB85X08 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Manuel utilisateur

Panasonic

Panasonic Switching Diodes MA2Z001 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2Z720 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SD250G Manuel utilisateur

Panasonic

Panasonic K-NL404K/G Manuel utilisateur

Panasonic

Panasonic K-NL408KT/G Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3938G Manuel utilisateur

Panasonic

Panasonic Transistors 2SC1318 Manuel utilisateur

Panasonic

Panasonic Circuit Protector Elements UNHZ203 Manuel utilisateur

Panasonic

Panasonic BB-HNP17A Manuel utilisateur

Panasonic

Panasonic Switching Diodes MA6X128 (MA128) Manuel utilisateur

Panasonic

Panasonic Transistors 2SA2162G Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur