MATSONIC MS7023D Manuel utilisateur

Important Information

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The

manufacturer makes no representations or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Further, the

manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business

Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their

respective owners and are acknowledged.

Version 1.2

Safety Compliance

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

qReorient or relocate the receiving antenna.

qIncrease the separation between the equipment and the receiver.

qConnect the equipment onto an outlet on a circuit different from that

to which the receiver is connected.

qConsult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be

employed with this equipment to insure compliance with the pertinent RF

emission limits governing this device. Changes or modifications not

expressly approved by the system’s manufacturer could void the user’s

authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject

to the following conditions:

qThis device may not cause harmful interference, and

qThis device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian

Interference-causing Equipment Regulations.

Cet appareil numériquede la classe B respecte toutes les exigences du

Réglement sur le matériel brouilieur du Canada.

Contents

Chapter 1: Introduction...........................................1

Welcome..................................................................1

About the Manual......................................................2

Checklist..................................................................3

Standard Items -------------------------------------------------------3

Recommendations....................................................3

Features...................................................................4

Chapter 2: Installation.............................................8

Quick Installation Table.............................................8

Quick Jumper Setting Reference................................9

Before You Begin......................................................11

Static Electricity------------------------------------------------------11

Choosing a Case-----------------------------------------------------11

How to Set Jumpers ------------------------------------------------12

Preparing the Mainboard...........................................13

Mainboard Guide-----------------------------------------------------13

I/O Ports Side View-------------------------------------------------15

Check the Jumper Settings --------------------------------------16

Install the Mainboard in the Case...............................19

Connecting Power, Chassis Fans,

Panel, Auxiliary USB Ports and

Case Open Detect Circuit----------------------------------------21

Install Other Hardware...............................................23

Install the Processor------------------------------------------------23

Installing a Slot1 Processor--------------------------------------25

Installing a Socket-370 Processor----------------------------27

Install the Memory Modules -------------------------------------29

Install a Hard Disk Drive and CD-ROM---------------------30

Installing a Floppy Diskette Drive------------------------------33

Using the Expansion Slots---------------------------------------34

Add-in Card Options------------------------------------------------36

Install Options and Extension Brackets---------------------37

Make the External Connections .................................41

External Connector Color Coding-----------------------------42

Chapter 3: Setup.....................................................43

About the Setup Utility...............................................43

Starting the Setup Utility------------------------------------------43

How to Flash a New BIOS ---------------------------------------45

Standard CMOS Features Option...............................46

Advanced BIOS Features Setup Option......................48

Advanced Chipset Features Option............................50

Integrated Peripherals Option ....................................52

Power Management Setup Option..............................55

PNP/PCI Configuration Option...................................58

PCI Health Status Option...........................................59

Frequency Voltage Control Option.............................60

Load Fail-Safe Defaults Option ..................................61

Load Optimized Defaults Option.................................61

Set Supervisor and User Passwords ..........................61

Save And Exit Setup Option.......................................62

Exit Without Saving Option........................................62

Chapter 4: Software................................................63

About the Software....................................................63

Folders for this Mainboard.........................................63

Running the Support CD-ROM...................................65

Utility Folder Installation Notes...................................65

CMI8X38 Folder Installation Notes .............................66

Audio Software--------------------------------------------------------66

Modem Driver and Software-------------------------------------67

Peripheral Folder Installation Notes............................67

Intel Folder Installation Notes.....................................67

Mainboard (MS7023D) Installation Notes....................68

Appendix 1: Quick Jumper Setting Reference.............68

Welcome

Congratulations on purchasing the MS7023D mainboard. The mainboard

includes a Slot-1 processor slot and a PPGA (Plastic Pin Grid Array)

Celeron Socket-370 processor socket. This feature means that you

can install the mainboard with a Pentium-II or Pentium-III cartridge,

the SEPP (Single Edge Processor Package) Celeron cartridge, or

one of the new generation PPGA Celerons.

The MS7023D is a micro-ATX mainboard that uses 4-layer printed circuit

board and measures 222mm x 244mm. The mainboard features the new

low-cost Intel 810 chipset which includes an accelerated graphics

adapter with digital video output for use by televisions or flat-panel

displays. The mainboard includes an integrated graphics system,

integrated audio system, integrated fax/modem and integrated

10BaseT/100BaseTX LAN adapter. The board has three PCI expansion

slots and a full set of I/O ports. The MS7023D lets system assemblers

create a low-cost, high-performance network-ready workstation using

very few additional components.

This chapter contains the following information:

qAbout the Manual explains how the information in this manual is

organized

qChecklist comprises a list of the standard and optional components

that are shipped with this mainboard

qRecommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance from this

product

qFeatureshighlights the functions and components that make this

one of the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and the checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and

get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to use the software drivers and

support programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard

checklist below. If any item is missing or appears damaged, please

contact the vendor of your mainboard package.

Standard Items

1 x MS7023D Mainboard

1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

This User’s Manual

Software Support CD-ROM Disc

Optional items

1 x V.90 Fax/modem Card

Recommendations

This mainboard automatically determines the CPU clock frequency and

system bus frequency for the kind of processor that you install. You may

be able to change these automatic settings by making changes to

jumpers on the mainboard, or changing the settings in the system setup

utility. We strongly recommend that you do not overclock the mainboard

to run processors or other components faster than their rated speed.

Overclocking components can adversely affect the reliability of the

system and introduce errors into your system. Overclocking can

permanently damage the mainboard by generating excess heat in

components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges of static

electricity. Handle the board carefully holding it by the edges. Don’t flex

or stress the circuit board. Keep the board in its static-proof packing until

you are ready to install it. Follow the static guidelines given at the

beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of processors that

can be installed, and the high level of integration which includes built-in

audio, video, networking, and communications.

Choice of Intel Processors

Functioning as a platform for a value PC, the MS7023D is ideally placed

for the installation of PPGA (Plastic Pin Grid Array) Celeron processor.

The PPGA Celeron has 32k of internal cache memory, 128K of external

cache memory, and operates over a 66MHz system bus. The PPGA

Celeron ships with clock speeds running from 300 MHz through to 500

MHz. The PPGA Celeron is the premiere choice for an entry-level PC.

For slightly better performance, the MS7023D can be installed with a

slot-1 processor. The SEPP (Single Edge Processor Package) Celeron

is the least expensive slot-1 processor. It has 32K of internal cache

memory, 128K of external cache memory (except for older versions),

and operates over a 66 MHz system bus. SEPP Celerons ship with clock

speed ranging from 266 MHz through 533 MHz.

For higher-performance business class computing, the slot-1 can be

installed with a Pentium-III or Pentium-II processor cartridge. The

Pentium cartridges have 32K of internal cache memory and 512K of

external cache memory. They operate over a 100 MHz system bus

(except for older versions). The Pentium-II ships with clock speeds

running from 233 MHz through to 450 MHz and the Pentium-III ships

with clock speeds of 450, 500, 550, and 600 MHz

Intel’s 810 Chipset

This board features the 810 chipset from Intel. The 810 chipset is

designed to reduce the cost and improve the multimedia capability of

value PCs. The chipset features an integrated AGP (Accelerated

Graphics Port) graphics controller which is optimized to produce smooth

rendition of 2D and 3D video The graphics controller improves

performance and reduces cost by dynamically allocating a segment of

active memory as video memory.

The 810 I/O chip (82801 I/O Controller Hub) makes a direct connection

between the graphics system and the IDE controller and the PCI bus. It

uses Accelerated Hub Architecture to effectively double the bandwidth

between these components enabling more life-like audio and video. It

includes an integrated Audio-Codec controller (AC97) which lets the

processor more effectively decode sound generated by the integrated

audio system or the integrated fax/modem. Finally, the 82802AB

Firmware Hub allows the system and video BIOS to be stored

(eliminating the need for non-volatile CMOS memory) for faster

execution, and provides a random number generator to enable strong

encryption routines.

Inexpensive Memory

The board has two DIMM sockets for the installation of 168-pin, 3.3V

non-buffered DIMM memory modules. The DIMM memory modules must

be installed with SDRAM memory chips. The board supports a memory

bus of 100 MHz, so you can use high-performance PC-100 memory

modules. Each installed memory module can be populated with 8 MB up

to 256 MB of memory, so a maximum total of 512 MB memory can be

installed. The integrated video system uses a shared memory

architecture so that you must reserve some of the installed memory as

video memory using the system BIOS. You must install at least one

memory module.

Highly Integrated Design

As well as the Intel 810 chipset, the P6ITW-Me features other highly

integrated silicon chips. The ITE LPC I/O controller handles the

mainboard’s I/O functions. The CMI 8738/PCI C3DX is a two-chip

solution that provides an integrated audio and fax/modem system. The

DM9102 provides the onboard network adapter.

Built-in AGP 3D-Graphics

The Intel 810 chipset includes an integrated AGP controller that is

optimized for smooth 2D and 3D video. The graphics system shares

active memory and does not require dedicated video memory. Video is

delivered through a regular 15-pin connector.

Built-in PCI 3D Sound

The PCI Audio CMI 8738 is a single chip solution for PCI-bus 3D audio.

The chip provides Sound Blaster 16-bit-compatible audio, plus support

for Microsoft’s DirectSound 3D specification and Aureal A3D interface.

The sound ports include jacks for speakers, microphone and stereo in,

and, through ITE LPC support, a game/MIDI port. The audio system

supports full duplex operation and drivers are available for WIN 95/98

and WIN NT 4.0. The audio system can output sound to 4 loudspeakers

and also supports SPDIF 24-bit digital sound input and output.

Built-in V.90 Fax/modem

The CMI 8738 chip is a single chip solution for value PC communications.

The chip supports 56 Kbps transmission using the V.90 protocol. The

chip is integrated with the built-in audio system to support voice as well

as data transmissions. In order to use the built-in fax/modem, you must

install an extension bracket that supplies the RJ11 sockets for LINE and

TELEPHONE.

Up-to-date Expansion Options

This is a micro-sized ATX board with a reduced set of current technology

expansion slots. However, since the board includes built-in networking,

built-in fax/modem, and built-in video and audio, the three 32-bit PCI

slots that are provided are more than adequate for expansion purposes.

Each of the three PCI (Peripheral Components Interconnect) slots

supports Ultra DMA 66/33 and bus mastering. In addition, the board has

an AMR slot. The AMR slot lets you install an AMR (Audio Modem Riser)

card. An AMR card is a neat solution to the problem of integrating a

modem on the mainboard. Because the regulations regarding the use of

modems is different from country to country, mainboard manufacturers

can simply install a standard AMR slot which can be used by third-party

Audio Modem Riser cards that have been certified for use in the local

territory.

Integrated I/O

Using the IT8870F I/O chip and the Intel 810 chipset, the board has a

comprehensive set of integrated I/O ports. The I/O port array features

PS/2 keyboard and mouse ports, a parallel port, two USB ports, digital

video out header, a monitor port, a game/MIDI port, and three audio

jacks. One serial port is installed on the back edge of the motherboard.

The board also has headers for an infrared port (for IrDA or ASKIR), and

a fax/modem card. The mainboard includes connections for floppy

diskette drives and two PCI IDE channels.

Hardware Monitoring

The IT8870F I/O chip includes useful hardware monitoring routines.

System assemblers and network administrators can reduce downtime

and repair costs by monitoring critical temperatures and voltages on the

system. The supplied hardware monitoring software lets you set

parameters that prompt warnings when they are exceeded.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to

turn on using a keyboard typed password. A green keyboard is not

required.

Table des matières

Autres manuels MATSONIC Carte mère

MATSONIC

MATSONIC MS8328E Series Manuel utilisateur

MATSONIC

MATSONIC MS7101C Manuel utilisateur

MATSONIC

MATSONIC MS7080SG Manuel utilisateur

MATSONIC

MATSONIC MS7057CT Manuel utilisateur

MATSONIC

MATSONIC MS9307C Series Manuel utilisateur

MATSONIC

MATSONIC MS7177CT Manuel utilisateur

MATSONIC

MATSONIC MS9007C Manuel utilisateur

MATSONIC

MATSONIC MS6393E Manuel utilisateur

MATSONIC

MATSONIC MS8137C Manuel utilisateur

MATSONIC

MATSONIC EM-5900V Manuel utilisateur

MATSONIC

MATSONIC MS9077C Manuel utilisateur

MATSONIC

MATSONIC MS6391E Manuel utilisateur

MATSONIC

MATSONIC MS8127C Manuel utilisateur

MATSONIC

MATSONIC MS7112C Manuel utilisateur

MATSONIC

MATSONIC MS8147C Manuel utilisateur

MATSONIC

MATSONIC MS7117C Manuel utilisateur

MATSONIC

MATSONIC MS9047C Series Manuel utilisateur

MATSONIC

MATSONIC MS7192SM Manuel utilisateur

MATSONIC

MATSONIC MS7057C Manuel utilisateur

MATSONIC

MATSONIC MS9138E Series Manuel utilisateur

MATSONIC

MATSONIC MS9087C Manuel utilisateur

MATSONIC

MATSONIC MS8188E Series Manuel utilisateur

MATSONIC

MATSONIC MS7122A Manuel utilisateur

MATSONIC

MATSONIC MS7127C Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur