MATSONIC MS7101C Manuel utilisateur

Important Information

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The

manufacturer makes no representations or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Further, the

manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business

Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their

respective owners and are acknowledged.

Version 1.0

Safety Compliance

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

!Reorient or relocate the receiving antenna.

!Increase the separation between the equipment and the receiver.

!Connect the equipment onto an outlet on a circuit different from that

to which the receiver is connected.

!Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be

employed with this equipment to insure compliance with the pertinent RF

emission limits governing this device. Changes or modifications not

expressly approved by the system’s manufacturer could void the user’s

authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject

to the following conditions:

!This device may not cause harmful interference, and

!This device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian

Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Réglement sur le matériel brouilieur du Canada.

Contents

Chapter 1: Introduction ..............................................1

Welcome.......................................................................1

About the Manual..........................................................2

Checklist........................................................................3

Standard Items-------------------------------------------------3

Recommendations........................................................3

Features........................................................................4

Chapter 2: Installation ................................................7

Quick Installation Table.................................................7

Quick Jumper Setting Reference..................................8

Before You Begin..........................................................9

Static Electricity------------------------------------------------9

Choosing a Case ----------------------------------------------10

How to Set Jumpers ------------------------------------------10

Preparing the Mainboard...............................................11

Mainboard Guide ----------------------------------------------11

Check the Jumper Settings ---------------------------------13

Connecting Power, Chassis Fans, and Panel----------16

Install Other Hardware..................................................18

Install the Processor------------------------------------------18

Installing a Slot1 Processor---------------------------------20

Installing a Socket-370 Processor-------------------------22

Install the Memory Modules---------------------------------24

Install a Hard Disk Drive and CD-ROM/DVD -----------25

Installing a Floppy Diskette Drive--------------------------28

Using the Expansion Slots ----------------------------------29

Add-in Card Options------------------------------------------31

Install Extension Brackets and Modules -----------------32

Chapter 3: Setup .........................................................38

About the Setup Utility...................................................38

Starting the Setup Utility-------------------------------------38

How to Flash a New BIOS-----------------------------------40

Standard CMOS Setup Option......................................41

BIOS & CPU Features Setup Option............................42

Chipset Features Option...............................................45

Power Management Setup Option................................47

PNP/PCI Configuration Option......................................50

Load BIOS Defaults Option...........................................51

Load Optimum Settings.................................................51

Integrated Peripherals Option.......................................52

Supervisor and User Password Settings ......................54

IDE HDD Auto Detection Option...................................54

Save And Exit Setup Option..........................................55

Exit Without Saving Option ...........................................55

Chapter 4: Software....................................................56

About the Software........................................................56

Folders for this Mainboard ............................................56

Running the Support CD-ROM .....................................58

Utility Folder Installation Notes .....................................58

CMI8X38 Folder Installation Notes...............................59

Audio Software------------------------------------------------- 59

Modem Driver and Software-------------------------------- 60

VIA Folder Installation Notes.........................................60

Mainboard (MS7101C) Installation Notes.....................61

Appendix 1: Quick Jumper Setting Reference.........62

Appendix 2: Glossary.................................................64

Welcome

Congratulations on purchasing the MS7101C mainboard. The mainboard

includes a Slot1 processor slot and a PPGA (Plastic Pin Grid Array)

Celeron Socket-370 processor socket. This feature means that you

can install the mainboard with either a Pentium-II or Pentium-III

cartridge, the SEPP (Single Edge Processor Package) Celeron

cartridge, or one of the new generation PPGA (Plastic Pin Grid

Array) Celerons.

The MS7101C is a baby-AT sized mainboard that uses 4-layer printed

circuit board and measures 22cm x 22cm. The mainboard features the

VIA Apollo Pro Plus chipset. The MS7101C has a slot1 and a socket-370

so that it can be installed with either a slot1 processor (SEPP Celeron,

Pentium-II, Pentium-III) or a socket-370 processor (PPGA Celeron). The

mainboard includes an integrated audio system and a plug-in fax/modem

module. The board has an AGP slot for a graphics adapter, three PCI

slots and one legacy ISA slot. The mainboard has power connectors for

both ATX and AT power supplies, so that it can be installed in practically

any kind of PC case.

This chapter contains the following information:

!About the Manual explains how the information in this manual is

organized

!Checklist comprises a list of the standard and optional components

that are shipped with this mainboard

!Recommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance from this

product

!Features highlights the functions and components that make this

one of the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and the checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and

get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to use the software drivers and

support programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard

checklist below. If any item is missing or appears damaged, please

contact the vendor of your mainboard package.

Standard Items

"1 x MS7101C Mainboard

"1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

"Parallel port extension bracket

"Serial ports extension bracket

"Audio ports extension bracket

"This User’s Manual

"Software Support CD-ROM Disc

Optional Items

"ATX Form Bracket (2 USB ports, IR port, PS/2 mouse port)

"Digital audio extension bracket

"V.90 Fax/modem module

Recommendations

This mainboard automatically determines the CPU clock frequency and

system bus frequency for the kind of processor that you install. You may

be able to change these automatic settings by making changes to

jumpers on the mainboard, or changing the settings in the system setup

utility. We strongly recommend that you do not overclock the mainboard

to run processors or other components faster than their rated speed.

Overclocking components can adversely affect the reliability of the

system and introduce errors into your system. Overclocking can

permanently damage the mainboard by generating excess heat in

components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges of static

electricity. Handle the board carefully holding it by the edges. Don’t flex

or stress the circuit board. Keep the board in its static-proof packing until

you are ready to install it. Follow the static guidelines given at the

beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of processors that

can be installed, and the support for both AT and ATX power supplies.

Wide Choice of Processors

This mainboard provides an excellent platform for an inexpensive value

PC that is internet-ready thanks to the fax/modem module. The socket-

370 can be installed with a PPGA Celeron processor. The PPGA

Celeron has 32k of internal cache memory, 128K of external cache

memory, and operates over a 66 MHz system bus. The PPGA Celeron

ships with clock speeds running from 300 MHz through to 500 MHz. The

PPGA Celeron is the ideal processor choice for an entry-level PC.

For better performance, the MS7101C can be installed with a slot1

processor. The SEPP (Single Edge Processor Package) Celeron is the

least expensive slot-1 processor. It has 32K of internal cache memory,

128K of external cache memory (except for older versions), and

operates over a 66 MHz system bus. SEPP Celerons ship with clock

speeds ranging from 266 MHz through to 500 MHz.

For higher-performance business-class computing, the slot1 can be

installed with a Pentium-II or Pentium-III processor cartridge. The

Pentium-II and Pentium-III have 32K of internal cache memory and 512K

of external cache memory. They operate over a 100 MHz system bus

(except for older versions). The Pentium-III includes new instructions that

are designed to enhance multimedia/internet computing by providing

rapid encoding and decoding of the compressed audio and video files

which are pervasive in the internet environment. The Pentium-II ships

with clock speeds running from 233 MHz through to 450 MHz. The

Pentium-III ships with clock speeds of 450 MHz, 500 MHz and 550 MHz.

VIA Apollo Pro Plus Chipset

The VIA Apollo Pro Plus chipset is a high performance chipset that

ensures full support for Intel’s Slot1 and socket-370 processors. The

chipset supports both 66 MHz and 100 MHz front side buses and

SDRAM memory installation of up to 768 MB. Support is provided for a

2x AGP slot and Rev. 2.2 PCI slots with Ultra DMA 33/66. The chipset is

compliant with the PC98/99 specifications.

Inexpensive Memory

The board has three DIMM sockets for the installation of 168-pin, 3.3V

non-buffered DIMM memory modules. The DIMM memory modules must

be installed with SDRAM memory chips. The board supports a memory

bus of 66 MHz or 100 MHz, so you can choose between inexpensive 66

MHz memory modules or high-performance PC-100 memory modules.

Each installed memory module can be populated with 8 MB up to 256

MB of memory, so a maximum total of 768 MB memory can be installed.

Highly Integrated Design

The ITE LPC I/O controller handles the mainboard’s I/O functions. The

CMI 8738/PCI C3DX is a two-chip solution that provides an integrated

audio and fax/modem system.

Built-in PCI 3D Sound

The system includes built-in PCI 3D audio support. The chip provides

Sound Blaster 16-bit-compatible audio, plus support for Microsoft’s

DirectSound 3D specification and Aureal A3D interface. The sound ports

include jacks for speakers, microphone and stereo in, and a game/MIDI

port. The audio system supports full duplex operation and drivers are

available for WIN 95/98 and WIN NT 4.0. The audio system can output

sound to 4 loudspeakers and also supports SPDIF 24-bit digital sound

input and output.

Built-in V.90 Fax/modem

The mainboard includes an integrated fax/modem. The fax/modem

supports 56 Kbps transmission using the V.90 protocol. The fax/modem

is integrated with the built-in audio system to support voice as well as

data transmissions. You must install a fax/modem module (with line and

telephone sockets) in order to use the integrated fax/modem.

Expansion Options

The board has plenty of expansion potential with one 2x AGP slot for an

AGP graphics adapter, three 32-bit PCI slots, and one legacy 8/16-bit

ISA slot. The ISA slot is shared with one of the PCI slots which means

that you can use either of the slots but not both at the same time. The

PCI slots support Ultra DMA with speeds of 33/66 MHz.

Integrated I/O

Using the ITE LPC I/O chip and the VIA Apollo Pro Plus chipset, the

board has a comprehensive set of integrated I/O ports. The I/O ports are

installed as connectors on the mainboard and can be installed on the

system case using extension brackets. The I/O ports include one PS/2

mouse port, a parallel port, two USB ports, and an infrared port. The

mainboard includes connections for floppy diskette drives and two PCI

IDE channels.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to

turn on using a keyboard typed password. A green keyboard is not

required.

Hardware Monitoring

The system supports hardware monitoring so that monitoring software

applications can generate warnings if critical parameters, such as

voltages and temperatures, are exceeded

Programmable Firmware

The mainboard includes Award BIOS which allows BIOS setting of CPU

parameters. The fully programmable firmware enhances the system

features and allows users to set power management, CPU and memory

timing, LAN and modem wake-up alarms, and so on. The firmware can

also be used to set parameters for different Celeron processor clock

speeds so that you don’t need to change mainboard jumpers and

switches.

Table des matières

Autres manuels MATSONIC Carte mère

MATSONIC

MATSONIC MS9118E Series Manuel utilisateur

MATSONIC

MATSONIC MS7177C Manuel utilisateur

MATSONIC

MATSONIC MS9047C Series Manuel utilisateur

MATSONIC

MATSONIC MS6393E Manuel utilisateur

MATSONIC

MATSONIC MS7057C Manuel utilisateur

MATSONIC

MATSONIC MS8127C Manuel utilisateur

MATSONIC

MATSONIC MS9087C Manuel utilisateur

MATSONIC

MATSONIC MS9017C Manuel utilisateur

MATSONIC

MATSONIC MS9077C Manuel utilisateur

MATSONIC

MATSONIC MS7012D Manuel utilisateur

MATSONIC

MATSONIC MS9127C Manuel utilisateur

MATSONIC

MATSONIC MS7167D Manuel utilisateur

MATSONIC

MATSONIC MS8308E Manuel utilisateur

MATSONIC

MATSONIC MS9118E Series Manuel utilisateur

MATSONIC

MATSONIC MS8177C Series Manuel utilisateur

MATSONIC

MATSONIC MS7157C Manuel utilisateur

MATSONIC

MATSONIC MS8318E Series Manuel utilisateur

MATSONIC

MATSONIC MS9027C Manuel utilisateur

MATSONIC

MATSONIC MS9327E Series Manuel utilisateur

MATSONIC

MATSONIC MS7177CT Manuel utilisateur

MATSONIC

MATSONIC MS9357E Series Manuel utilisateur

MATSONIC

MATSONIC MS7188DSeries Manuel utilisateur

MATSONIC

MATSONIC MS7112C Manuel utilisateur

MATSONIC

MATSONIC MS7381SGM Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur