MATSONIC MS7127C Manuel utilisateur

Caution! When installing a CPU heatsink and

cooling fan make sure that you DO

NOT scratch the motherboard or any of

the surface-mount resistors with the clip

of the cooling fan. If the clip of the

cooling fan scrapes across the main-

board, you may cause serious damage

to both the mainboard and the proces-

sor.

On most mainboards, there are small

surface-mount resistors near the proces-

sor socket, which may be damaged if

the cooling fan is carelessly installed.

Avoid using cooling fans with sharp

edges on the fan casing and the clips.

Also, install the cooling fan in a well-lit

work area so that you can clearly see

the mainboard and processor socket.

ool

an and

heat sink

CPU socket

Important Information

This publication, including all photographs, illustrations and

software, is protected under international copyright laws, with all

rights reserved. Neither this manual, nor any of the material

contained herein, may be reproduced without the express writ-

ten consent of the manufacturer.

Version 1.0

Disclaimer

The information in this document is subject to change without

notice. The manufacturer makes no representations or warranti-

es with respect to the contents hereof and specifically disclaims

any implied warranties of merchantability or fitness for any par-

ticular purpose. Further, the manufacturer reserves the right to

revise this publication and to make changes from time to time in

the content hereof without obligation of the manufacturer to no-

tify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of

Microsoft Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

Other product names used in this manual are the properties of

their respective owners and are acknowledged.

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency en-

ergy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is en-

couraged to try to correct the interference by one or more of the

following measures:

!Reorient or relocate the receiving antenna.

!Increase the separation between the equipment and the

receiver.

!Connect the equipment onto an outlet on a circuit differ-

ent from that to which the receiver is connected.

!Consult the dealer or an experienced radio/TV technician

for help.

Shielded interconnect cables and a shielded AC power cable

must be employed with this equipment to ensure compliance

with the pertinent RF emission limits governing this device.

Changes or modifications not expressly approved by the sys-

tem’s manufacturer could void the user’s authority to operate the

equipment.

iii

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is

subject to the following conditions:

!This device may not cause harmful interference, and

!This device must accept any interference received, in-

cluding interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Ca-

nadian Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exi-

gences du Réglement sur le matériel brouilieur du Canada.

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and verify the checklist of items that are shipped

with the package.

Installation

Use the Installation Chapter to learn how to install the main-

board and get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to install the software

drivers and support programs that are provided with this main-

board.

Contents

Important Information i

Disclaimer i

Trademark Recognition ii

Federal Communications Commission (FCC) ii

Declaration of Conformity iii

Canadian Department of Communications iii

About the Manual iv

CHAPTER 1: INTRODUCTION 1

Welcome 1

Checklist 2

Recommendations 2

Features 3

CHAPTER 2: INSTALLATION 7

Quick Installation Table 7

Before You Begin 8

Static Electricity 8

Choosing a Case 9

Preparing the Mainboard 10

Mainboard Guide 10

I/O Ports Side View 12

Check the Jumper Settings 13

Installing the Mainboard in a Case 17

Connecting Internal Components 18

Installing Other Hardware 20

Installing the Processor 20

Install the Memory Modules 22

Installing a Hard Disk Drive and CD-ROM 24

Installing a Floppy Diskette Drive 27

Using the Expansion Slots 28

Add-in Card Options 30

Making External Connections 31

External Connector Color Coding 32

CHAPTER 3: SETUP 33

About the Setup Utility 33

Entering the Setup Utility 34

BIOS Navigation Keys 35

Using BIOS 36

How to Flash a New BIOS 37

Standard CMOS Setup Option 38

Advanced CMOS Setup Option 41

Advanced Chipset Features Option 45

Integrated Peripherals Option 48

Power Management Setup Option 52

PNP/PCI Configuration Option 58

PCI Health Status Option 60

Frequency Control Option 61

Load Fail-Safe Defaults Option 62

Load Optimized Defaults Option 62

Set Supervisor and User Passwords Options 63

Save & Exit Setup Option 64

Exit Without Saving Option 64

CHAPTER 4: SOFTWARE 65

Folders for this Mainboard 65

Utility Folder Installation Notes 66

Mainboard (MS7127C) Installation Notes 68

APPENDIX: JUMPER SETTING REFERENCE 69

Quick Jumper Setting Reference 69

Welcome

Congratulations on purchasing the MS7127C mainboard. The

MS7127C mainboard is an ATX mainboard that uses a 4-layer

printed circuit board and measures 304 mm x 190 mm. The

mainboard features a Socket 370 that accommodates PPGA

Celeron, FC-PGA Pentium III, and Cyrix III processors that sup-

port frontside bus (FSB) speeds up to 133 MHz.

The MS7127C uses the VIA family chipset and features the AC

97 audio codec. The mainboard is equipped with a 2xAGP (Accel-

erated Graphics Port) slot and two PCI Bus Master Ultra DMA

(UDMA) ports that support up to four ATAPI (AT Attachment Packet

Interface) devices. The PCI IDE also supports PIO Mode 3 and 4,

UDMA33/66 IDE (UDMA100 is optional), and an ATAPI CD-ROM.

Note: The MS7127C supports two VIA South Bridge chipsets—

the VIA VT82C686A and the VIA VT82C686B. The VIA

VT82C686A is standard and supports UDMA33/66. The VIA

VT82C686B is optional and supports UDMA100.

The mainboard accommodates PC 100 SDRAM (Synchronous

DRAM) up to 1.5 GB using three 3.3V unbuffered DIMM modules.

The MS7127C also has a full set of I/O ports, such as dual channel

IDE interfaces, a floppy controller, two FIFO serial port connectors,

an EPP/ECP-capable bi-directional parallel port connector, a dual

USB (Universal Serial Bus) connector, and PS/2 keyboard and

mouse connectors.

One AGP slot, four PCI local bus slots, two ISA slots, and one

audio modem riser (AMR) slot provide expandability for add-on

peripheral cards.

This chapter contains the following information:

!Checklist comprises a list of the standard and optional

components that are shipped with this mainboard

!Recommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance

from this product

!Features highlights the functions and components that

make this one of the best value mainboards on the market

Checklist

Compare the contents of your mainboard package with the stan-

dard checklist below. If any item is missing or appears damaged,

please contact the vendor of your mainboard package.

Standard Items

!One mainboard

!One diskette drive ribbon cable and bracket

!One IDE drive ribbon cable and bracket

!This user’s manual

!Software support CD-ROM disc

Recommendations

This mainboard automatically determines the CPU clock fre-

quency and system bus frequency for the kind of processor that

you install. You may be able to change these automatic settings

by making changes to jumpers on the mainboard, or changing

the settings in the system Setup Utility. We strongly recommend

that you do not overclock the mainboard to run processors or

other components faster than their rated speed.

Warning: Overclocking components can adversely affect the reliabil-

ity of the system and introduce errors into your system. Overclocking

can permanently damage the mainboard by generating excess heat

in components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges

of static electricity. Handle the board carefully holding it by the

edges. Do not flex or stress the circuit board. Keep the board in

its static-proof packing until you are ready to install it. Follow the

static guidelines given at the beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of proc-

essors that can be installed, and the high level of integration.

Value-class Processors

Functioning as a platform for a value PC, the MS7127C features

a Socket 370 that accommodates PPGA Celeron, Pentium III,

and Cyrix III processors. The MS7127C supports 66/100/133

MHz FSB speeds.

VIA North Bridge Chipset

This board features the VIA VT82C693A NB (North Bridge)

chipset, enabling synchronous and asynchronous frequency op-

eration between the processor and the memory over a wide

frequency range. The NB chipset is optimized for Pentium III

processors at 66/100/133 MHz Front Side Bus (FSB) frequency

and supports 32-bit processor bus addressing. The following

host/DRAM clocking configurations are supported:

•66/66

•66/100

•100/66

•100/100

•100/133

•133/100

•133/133.

The integrated DRAM controller supports up to three double-

sided DIMMs or six banks up to 1.5 GB using 256 MB DRAM

technology. The NB chipset provides SDRAM with a 64-bit data

interface.

The AGP interface is AGP specification Rev 2.0 compliant, and

supports 2x devices. The PCI bus interface complies with PCI

Rev. 2.2, and supports 3.3V and power supplies. Five PCI bus

masters are supported in addition to the host and PCI-to-ISA I/O

bridge.

VIA South Bridge Chipset

Note: The MS7127C supports two VIA South Bridge chipsets—

the VIA VT82C686A and the VIA VT82C686B. The VIA

VT82C686A is standard and supports UDMA33/66. The VIA

VT82C686B is optional and supports UDMA100.

The VIA VT82C686A SB (South Bridge) chipset comes in a 352-pin

BGA package. The PCI to ISA Bridge has an integrated ISA bus

controller with integrated DMA, timer, and interrupt controllers. The

VIA VT82C686A chipset supports UDMA33/66.

As an option you can get the MS7127C with the VIA VT82C686B

SB chipset, which supports UDMA100.

The Real Time Clock features extended 256 byte CMOS RAM

and a day and month alarm for the ACPI (Advanced Configura-

tion and Power Interface).

There is an integrated USB controller with a built-in root hub and

four function ports. The integrated Ultra DMA33/66 master mode

EIDE controller with enhanced PCI bus commands.

The UltraDMA33/66 Master Mode PCI EIDE controller features

dual channel master mode PCI supporting Enhanced IDE (EIDE)

devices and employ transfer rates up to 33 MB/sec to cover PIO

mode 4, multi-word DMA mode 2 drives, and UltraDMA-33 in-

terface. The SB chipset also supports ATAPI compliant devices

including DVD devices and four USB 1.1 ports for serial trans-

fers at 12 or 1.5 Mbits/sec.

The integrated super IO controller supports two serial ports, an

IR port, parallel port, and floppy disk controller functions. There

is also system monitor support, providing system feedback of

voltage, temperature, and fan speed conditions.

Table des matières

Autres manuels MATSONIC Carte mère

MATSONIC

MATSONIC MS9158 Series Manuel utilisateur

MATSONIC

MATSONIC MS7188DSeries Manuel utilisateur

MATSONIC

MATSONIC MS7012D Manuel utilisateur

MATSONIC

MATSONIC MS8127C Manuel utilisateur

MATSONIC

MATSONIC MS6261 Manuel utilisateur

MATSONIC

MATSONIC MS9017C Manuel utilisateur

MATSONIC

MATSONIC MS7192S Manuel utilisateur

MATSONIC

MATSONIC MS7192SM Manuel utilisateur

MATSONIC

MATSONIC MS7132A Manuel utilisateur

MATSONIC

MATSONIC MS9087C Manuel utilisateur

MATSONIC

MATSONIC MS8308E Manuel utilisateur

MATSONIC

MATSONIC MS9027C Manuel utilisateur

MATSONIC

MATSONIC MS9118E Series Manuel utilisateur

MATSONIC

MATSONIC MS9138E Series Manuel utilisateur

MATSONIC

MATSONIC MS9357E Series Manuel utilisateur

MATSONIC

MATSONIC MS7117C Manuel utilisateur

MATSONIC

MATSONIC MS6383E Manuel utilisateur

MATSONIC

MATSONIC MS9138D Series Manuel utilisateur

MATSONIC

MATSONIC MS8177C Series Manuel utilisateur

MATSONIC

MATSONIC MS7381SGM Manuel utilisateur

MATSONIC

MATSONIC MS7308E Series Manuel utilisateur

MATSONIC

MATSONIC MS9307C Series Manuel utilisateur

MATSONIC

MATSONIC MS7177CT Manuel utilisateur

MATSONIC

MATSONIC MS9118E Series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur