MATSONIC MS7012D Manuel utilisateur

Important Information

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The

manufacturer makes no representations or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Further, the

manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business

Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their

respective owners and are acknowledged.

Version 2.0

Safety Compliance

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

qReorient or relocate the receiving antenna.

qIncrease the separation between the equipment and the receiver.

qConnect the equipment onto an outlet on a circuit different from that

to which the receiver is connected.

qConsult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be

employed with this equipment to insure compliance with the pertinent RF

emission limits governing this device. Changes or modifications not

expressly approved by the system’s manufacturer could void the user’s

authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject

to the following conditions:

qThis device may not cause harmful interference, and

qThis device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian

Interference-causing Equipment Regulations.

Cet appareil numériquede la classe B respecte toutes les exigences du

Réglement sur le matériel brouilieur du Canada.

Contents

Chapter 1: Introduction...........................................1

Welcome..................................................................1

About the Manual......................................................2

Checklist..................................................................3

Standard Items -------------------------------------------------------3

Recommendations....................................................3

Features...................................................................4

Chapter 2: Installation.............................................8

Quick Installation Table.............................................8

Quick Jumper Setting Reference................................9

Before You Begin......................................................11

Static Electricity------------------------------------------------------11

Choosing a Case-----------------------------------------------------11

How to Set Jumpers ------------------------------------------------12

Preparing the Mainboard...........................................13

Mainboard Guide-----------------------------------------------------13

I/O Ports Side View-------------------------------------------------15

Check the Jumper Settings --------------------------------------16

Install the Mainboard in the Case...............................19

Connecting Power, Chassis Fans, Panel,

Auxiliary USB Ports, and Case Open Detect Circuit---21

Install Other Hardware...............................................23

Install the Processor------------------------------------------------23

Installing a Slot1 Processor--------------------------------------25

Installing a Socket-370 Processor----------------------------27

Install the Memory Modules -------------------------------------29

Install a Hard Disk Drive and CD-ROM---------------------30

Installing a Floppy Diskette Drive------------------------------33

Using the Expansion Slots---------------------------------------34

Add-in Card Options------------------------------------------------36

Install Options and Extension Brackets---------------------37

Make the External Connections .................................42

External Connector Color Coding-----------------------------43

Chapter 3: Setup.....................................................44

About the Setup Utility...............................................44

Starting the Setup Utility------------------------------------------44

How to Flash a New BIOS ---------------------------------------46

Standard CMOS Features Option...............................47

Advanced BIOS Features Setup Option......................49

Advanced Chipset Features Option............................51

Integrated Peripherals Option ....................................53

Power Management Setup Option..............................56

PNP/PCI Configuration Option...................................59

PCI Health Status Option...........................................60

Frequency / Voltage Control Option............................61

Load Fail-Safe Defaults Option ..................................62

Load Optimized Defaults Option.................................62

Set Supervisor and User Passwords ..........................62

Save And Exit Setup Option.......................................63

Exit Without Saving Option........................................63

Chapter 4: Software................................................64

About the Software....................................................64

Folders for this Mainboard.........................................64

Running the Support CD-ROM...................................66

Utility Folder Installation Notes...................................66

CMI8X38 Folder Installation Notes .............................67

Audio Software--------------------------------------------------------67

Modem Driver and Software-------------------------------------68

Intel Folder Installation Notes.....................................68

Mainboard (MS7012D) Installation Notes....................69

Appendix 1: Quick Jumper Setting Reference ........70

Welcome

Congratulations on purchasing the MS7012D mainboard. The mainboard

includes a Slot1 processor slot and a PPGA (Plastic Pin Grid Array)

Celeron Socket-370 processor socket. This feature means that you

can install the mainboard with a Pentium-iii or Pentium-II cartridge,

the SEPP (Single Edge Processor Package) Celeron cartridge, or

one of the new generation PPGA Celerons.

The MS7012D is a full-sized ATX mainboard that uses 4-layer printed

circuit board and measures 305mm x 243mm. The mainboard features

the new low-cost Intel 810 chipset which includes an accelerated

graphics adapter with digital video output for use by televisions of flat-

panel displays. The MS7012D has a slot1 and a socket-370 so that it

can be installed with either a slot1 processor (SEPP Celeron or Pentium-

II) or a socket-370 processor (PPGA Celeron). The mainboard includes

integrated graphics system, integrated audio system, and integrated

fax/modem. A powerful internet-ready workstation can be developed with

just the addition of processor and memory. Therefore the MS7012D is

the ideal platform for the creation of a powerful value PC.

This chapter contains the following information:

qAbout the Manual explains how the information in this manual is

organized

qChecklist comprises a list of the standard and optional components

that are shipped with this mainboard

qRecommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance from this

product

qFeatureshighlights the functions and components that make this

one of the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and the checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and

get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to use the software drivers and

support programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard

checklist below. If any item is missing or appears damaged, please

contact the vendor of your mainboard package.

Standard Items

1 x MS7012D Mainboard

1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

Serial ports extension bracket

This User’s Manual

Software Support CD-ROM Disc

Optional Items

1 x V.90 Fax/modem Card

1 x TV-out extension bracket

Recommendations

This mainboard automatically determines the CPU clock frequency and

system bus frequency for the kind of processor that you install. You may

be able to change these automatic settings by making changes to

jumpers on the mainboard, or changing the settings in the system setup

utility. We strongly recommend that you do not overclock the mainboard

to run processors or other components faster than their rated speed.

Overclocking components can adversely affect the reliability of the

system and introduce errors into your system. Overclocking can

permanently damage the mainboard by generating excess heat in

components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges of static

electricity. Handle the board carefully holding it by the edges. Don’t flex

or stress the circuit board. Keep the board in its static-proof packing until

you are ready to install it. Follow the static guidelines given at the

beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of processors that

can be installed, and the high level of integration which includes built-in

audio, video, and communications.

Value-class Processors

Functioning as a platform for a value PC, the MS7012D is ideally suited

for the PPGA (Plastic Pin Grid Array) Celeron processor. The PPGA

Celeron has 32k of internal cache memory, 128K of external cache

memory, and operates over a 66MHz system bus. The PPGA Celeron

ships with clock speeds running from 300 MHz through to 500 MHz. The

PPGA Celeron is the premiere choice for an entry-level PC. For slightly

better performance, the MS7012D can be installed with a slot-1

processor. The SEPP (Single Edge Processor Package) Celeron is the

least expensive Dlot-1 processor. It has 32K of internal cache memory,

128K of external cache memory (except for older versions), and

operates over a 66 MHz system bus. SEPP Celerons ship with clock

speed ranging from 266 MHz through 500 MHz.

For higher-performance business class computing, the slot-1 can be

installed with a Pentium-III or Pentium-II processor cartridge. The

Pentium cartridges have 32K of internal cache memory and 512K of

external cache memory. They operate over a 100 MHz system bus

(except for older versions). The Pentium-II ships with clock speeds

running from 233 MHz through to 450 MHz and the Pentium-III ships

with clock speeds of 450, 500, and 550 MHz

Intel’s 810 Chipset

This board features the 810 chipset from Intel. The 810 chipset is

designed to reduce the cost and improve the multimedia capability of

value PCs. The chipset features an integrated AGP (Accelerated

Graphics Port) graphics controller which is optimized to produce smooth

rendition of 2D and 3D video. Digital video output is supported so that

the system can display on a TV or a flat-panel display with digital video

input. The graphics controller improves performance and reduces cost

by dynamically allocating a segment of active memory as video memory.

The 810 I/O chip (82801 I/O Controller Hub) makes a direct connection

between the graphics system and the IDE controller and the PCI bus. It

uses Accelerated Hub Architecture to effectively double the bandwidth

between these components enabling more life like audio and video. It

includes an integrated Audio-Codec controller (AC97) that lets the

processor more effectively decode sound generated by the integrated

audio system or the integrated fax/modem. Finally, the P82802 Firmware

Hub allows the system and video BIOS to be stored (eliminating the

need for non-volatile CMOS memory) for faster execution, and provides

a random number generator to enable strong encryption routines.

Inexpensive Memory

The board has two DIMM sockets for the installation of 168-pin, 3.3V

non-buffered DIMM memory modules. The DIMM memory modules must

be installed with SDRAM memory chips. The board supports a memory

bus of 66 MHz or 100 MHz, so you can choose between inexpensive 66

MHz memory modules or high-performance PC-100 memory modules.

Each installed memory module can be populated with 8 MB up to 256

MB of memory, so a maximum total of 512 MB memory can be installed.

The integrated video system uses a shared memory architecture so that

you must reserve some of the installed memory as video memory using

the system BIOS. You must install at least one memory module.

Highly Integrated Design

As well as the Intel 810 chipset, the MS7012D features other highly

integrated silicon chips. The ITE LPC I/O controller handles the

mainboard’s I/O functions. The CMI 8738/PCI C3DX is a two-chip

solution that provides an integrated audio and fax/modem system. The

Chrontel CH7007A is a single chip dedicated to converting digital PC

output to a TV format.

Built-in AGP 3D-Graphics

The Intel 810 chipset includes an integrated AGP controller that is

optimized for smooth 2D and 3D video. The graphics system shares

active memory and does not require dedicated video memory. Video is

delivered through a regular 15-pin connector, or as a low cost alternative

to a monitor, the system can display on a regular TV set by using an

optional TV-out extension bracket with an RCA video jack.

Built-in PCI 3D Sound

The PCI Audio CMI 8738 is a single chip solution for PCI-bus 3D audio.

The chip provides Sound Blaster 16-bit-compatible audio, plus support

for Microsoft’s DirectSound 3D specification and Aureal A3D interface.

The sound ports include jacks for speakers, microphone and stereo in,

and a game/MIDI port. The audio system supports full duplex operation

and drivers are available for WIN 95/98 and WIN NT 4.0. The audio

system can output sound to 4 loudspeakers and also supports SPDIF

24-bit digital sound input and output.

Built-in V.90 Fax/modem

The PCI C3DX chip is a single chip solution for value PC

communications. The chip supports 56 Kbps transmission using rhe V.90

protocol. The chip is integrated with the built-in audio system to support

voice as well as data transmissions.

Up-to-date Expansion Options

This is a full-sized ATX board with a full set of current technology

expansion slots. The mainboard no longer supports the legacy ISA

(Industry Standard Architecture) 8/16-bit slots. Instead, the board

provides five 32-bit PCI (Peripheral Components Interconnect) slots, with

each slot supporting Ultra DMA 66/33 and bus mastering. In addition, the

board has an AMR slot. The AMR slot lets you install an AMR (Audio

Modem Riser) card. Because the regulations regarding the use of

modems is different from country to country, mainboard manufacturers

can simply install a standard AMR slot which can be used by third-party

Audio Modem Riser cards that have been certified for use in the local

territory.

Integrated I/O

Using the ITE LPC I/O chip and the Intel 810 chipset, the board has a

comprehensive set of integrated I/O ports. The I/O port array features

PS/2 keyboard and mouse ports, a parallel port, two USB ports, one

serial port, a monitor port, a game/MIDI port, and three audio jacks. The

mainboard has connectors for the installation of a second serial port,

TV-out ports (supplied on optional extension brackets), an infrared port

(for IrDA or ASKIR), a fax/modem card, and two additional USB ports.

The mainboard includes connections for floppy diskette drives and two

PCI IDE channels.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to

turn on using a keyboard typed password. A green keyboard is not

required.

Programmable Firmware

The mainboard includes Award BIOS which allows BIOS setting of CPU

parameters. The fully programmable firmware enhances the system

features and allows users to set power management, CPU and memory

timing, LAN and modem wake-up alarms, and so on. The firmware can

also be used to set parameters for different Celeron processor clock

speeds so that you don’t need to change mainboard jumpers and

switches.

Table des matières

Autres manuels MATSONIC Carte mère

MATSONIC

MATSONIC MS8308E Manuel utilisateur

MATSONIC

MATSONIC MS7102C Manuel utilisateur

MATSONIC

MATSONIC MS9307C Series Manuel utilisateur

MATSONIC

MATSONIC MS9127C Manuel utilisateur

MATSONIC

MATSONIC MS7157C Manuel utilisateur

MATSONIC

MATSONIC MS7122A Manuel utilisateur

MATSONIC

MATSONIC MS-7090S Manuel utilisateur

MATSONIC

MATSONIC MS9147C Series Manuel utilisateur

MATSONIC

MATSONIC MS9077C Manuel utilisateur

MATSONIC

MATSONIC MS9357E Series Manuel utilisateur

MATSONIC

MATSONIC MS6261 Manuel utilisateur

MATSONIC

MATSONIC MS9007C Manuel utilisateur

MATSONIC

MATSONIC MS8188E Series Manuel utilisateur

MATSONIC

MATSONIC MS6380SG Manuel utilisateur

MATSONIC

MATSONIC MS9327E Series Manuel utilisateur

MATSONIC

MATSONIC MS6391E Manuel utilisateur

MATSONIC

MATSONIC MS7101C Manuel utilisateur

MATSONIC

MATSONIC MS9047C Series Manuel utilisateur

MATSONIC

MATSONIC MS9027C Manuel utilisateur

MATSONIC

MATSONIC MS8157E Manuel utilisateur

MATSONIC

MATSONIC MS7177C Manuel utilisateur

MATSONIC

MATSONIC MS6383E Manuel utilisateur

MATSONIC

MATSONIC MS7188DSeries Manuel utilisateur

MATSONIC

MATSONIC MS9158 Series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur