MATSONIC MS-7090S Manuel utilisateur

Important Information

This publication, including all photographs, illustrations and software, is protected

any of the material contained herein, may be reproduced without the express written

consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The

manufacturer makes no representations or warranties with respect to the contents

hereof and specifically disclaims any implied warranties of merchantability or fitness

for any particular purpose. Further, the manufacturer reserves the right to revise this

publication and to make changes from time to time in the content hereof without

obligation of the manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.

MMX, Pentium, Pentium-II, Celeron are a registered trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their respective owners

and are acknowledged.

Version 1.0

Safety Compliance

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

♦Reorient or relocate the receiving antenna.

♦Increase the separation between the equipment and the receiver.

♦Connect the equipment onto an outlet on a circuit different from that to which

the receiver is connected.

♦Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be employed with this

equipment to insure compliance with the pertinent RF emission limits governing this

device. Changes or modifications not expressly approved by the system’s

manufacturer could void the user’s authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject to the

following conditions:

♦This device may not cause harmful interference, and

♦This device must accept any interference received, including interference that

may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian Interference-

causing Equipment Regulations.

Cet appareilnumérique de la classeB respecte toutes les exigences du Réglement sur

le matérielbrouilieur du Canada.

Chapter 1: Introduction

Welcome.... .................. .................. ........ ......... ........ 1

About the Manual........... .................. ........ ......... ........ 1

Checklist .... .................. .................. ........ ......... ........ 2

Features..... .................. .................. ........ ......... ........ 2

Chapter 2: Installation

Before You Begin........... .................. ........ ......... ........ 5

Mainboard Guide............ .................. ........ ......... ........ 6

Preparing the Mainboard .................. ........ ......... ........ 7

Install the Mainboard in the System Case.... ......... ........ 12

Chapter 3: Setup

About the Setup Utility.... .................. ........ ......... ........ 17

Standard CMOS Setup Option ........... ........ ......... ........ 19

BIOS Feature Setup Option ............... ........ ......... ........ 20

Chipset Features Option. .................. ........ ......... ........ 22

Power Management Setup Option...... ........ ......... ........ 24

PNP/PCI Configuration Option ........... ........ ......... ........ 27

Load BIOS Defaults Option................ ........ ......... ........ 28

Load Optimum Settings Option........... ........ ......... ........ 28

Integrated Peripherals Option............. ........ ......... ........ 28

Password Settings ......... .................. ........ ......... ........ 31

IDE HDD Auto Detection Option......... ........ ......... ........ 31

Save and Exit Setup Option............... ........ ......... ........ 31

Exit Without Saving Option................ ........ ......... ........ 31

Chapter 4: Software

About the Software......... .................. ........ .........32

Utility Folder Installation Guide........... ........ ......... ........ 32

Utility Installation Notes .. .................. ........ ......... ........ 33

Mainboard Folder Installation Guide ... ........ ......... ........ 34

Mainboard Installation Notes.............. ........ ......... ........ 34

CMI8338 Audio Folder Installation Guide..... ......... ........ 35

Appendix

1. Quick Jumper Setting Reference.... ........ ......... ........ 37

Welcome

Congratulations on your purchase of the MS-7090S mainboard. The MS-7090S

mainboard is a micro-ATX board measuring 243.8 mm by 200 mm and using a 4-layer

printed circuit board. This board features a PGA370 ZIF (Zero Insertion Force)

processor socket. This socket can be installed with the latest generation of Intel

Celeron processors that are packaged in a Plastic Pin Grid Array (PPGA), just like the

original Pentium processors. The mainboard supports a system bus of 66 MHz that

permits the use of inexpensive 66 MHz memory chips. Three DIMM sockets are

provided for a maximum memory capacity of 256 MB. The mainboard has an

integrated 3D-sound system, and the Intel chipset supports an AGP graphics card.

Three PCI slots and one ISA slot are provided for system expansion.

This chapter contains the following information:

lAbout the Manual explains how the information in this manual is

organized

lChecklistcomprises a list of the standard and optional components that are

shipped with this mainboard,

lFeatures highlights the functions and components that make this one of

the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the mainboard, and the

checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and get your system

up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum performance.

Software

Use the Software Chapter to learn how to use the software drivers and support

programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard checklist below. If

any item is missing or appears damaged, please contact the vendor of your mainboard

package.

Standard Items

1 x MS-7090S Mainboard

1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

This User’s Manual

Software Support CD-ROM Disc

Features

This is an economic platform which provides entry-level through to business-class

Pentium-II performance for minimum cost. This is a powerful platform that leverages

the low-cost/high-performance features of the new generation of Celeron processors.

Low-cost/high performance Processing

Intel’s new generation of Celeron processors are shipped in the familiar PPGA square

plastic package that are common to all Pentium and Pentium-compatible processors.

The mainboard has a PGA370 ZIF socket for the installation of the Celeron. (Note that

the socket has a differentpinout than Pentium/Pentium compatibles and cannot be

used by Socket-7 processors.) The Celeron processor features Pentium-II performance

with internal clock speeds of 300, 333, 366, 400, and 433 MHz (higher speeds may be

forthcoming), 32K of level-1 cache memory, and 128K of level-2 cache memory. The

Celeron is an economic processor because it runs on a 66 MHz system bus so that the

mainboard design and components are not high-cost items. This mainboard allows

entry-level and business-class users to move up to Pentium-II performance at

minimum cost. Configuration for different processor speeds is automatically set by

firmware and motherboard switch or jumper settings are not required.

Inexpensive Memory

The board has three DIMM sockets for the installation of 168-pin, 3.3V non-buffered

DIMM memory modules. The DIMM memory modules can be installed with EDO or

SDRAM memory chips. The board supports a memory bus of 66 MHz, so inexpensive

66 MHz memory chips can be used. Each installed memory module can be populated

with 16 MB up to 128 MB of memory, and can be single-sided or double sided.

However, total installed memory must not exceed 256 MB. If you install a double-

sided module in either DIMM 2 or DIMM 3, you cannot install any memory module in

the other socket. DIMM1 is independent and does not have this limitation.

Highly Integrated Design

This mainboard features a high level of integrated functions provided by the onboard

chipsets. The Intel 82443EX provides all the north bridge support–CPU and memory

addressing, PCI-IDE controller, and PCI-bus interface. In addition, the 82443EX

provides a complete AGP graphics controller solution. The Intel 82371EB provides

the south bridge support–ACPI power management, real-time clock, and USB

interface. The Winbond W83977EF is a single chip I/O solution, and the Elite PCI

Audio-CMI8338 provides the onboard 3D audio feature. Hardware monitoring is

supported by the GL520SM. This highly integrated mainboard ensures stability and

allows a fully functional system to be created by adding just a processor, a graphics

adapter and memory.

Built-in PCI 3D Sound

The Elite PCI Audio-CMI8338 is a single chip solution for PCI-bus 3D audio. The

chip provides Sound Blaster 16-bit-compatible audio, plus support for Microsoft’s

DirectSound 3D specification andAureal A3D interface. The sound ports include

jacks for speakers, microphone and stereo in, and a game/MIDI port. The audio system

supports full duplex operation and drivers are available for WIN 95/98 andWIN NT

4.0. The audio system can output sound to 4 speakers and also supports SPDIF 24-bit

digital sound input and output.

Solid Expansion Options

Because this is a highly integrated board with built-in audio and a full set of I/O ports,

it does not require a full set of expansion slots. The board provides three usable slots.

The board has three 32-bit PCI slots and one 8/16-bit ISA slot. The ISA slot is shared

with one of the PCI slots meaning that you can use either the ISA slot or the PCI slot,

but not both at the same time. PCI1 and PCI3 share a request line. This means that

only one of these slots can support a bus-mastering PCI expansion card.

Integrated I/O

Using the Winbond W83977EF I/O chip and the Intel 82443EX/82371EB chipset, the

board has a comprehensive set of integrated I/O ports. The I/O port array features PS/2

keyboard and mouse ports, a parallel port, two USB ports, two serial ports, a

game/MIDI port, and three audio jacks. Optionally, you can use the built-in mainboard

header to add in an infrared port. The mainboard has two PCI-IDE channels and a

floppy disk drive interface.

Hardware Monitoring

This mainboard features hardware monitoring supported by the GL520SM system

monitor chip. Using the system BIOS, system administrators can track critical

hardware parameters such as CPU temperature and cooling fan speeds. Limits can be

set to ensure system power management prevents threshold temperatures and

parameters from being exceeded.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to turn on using

keyboard hot keys and mouse, or a keyboard typed password. A green keyboard is not

required.

Programmable Firmware

The mainboard includes Award BIOS which allows BIOS setting of CPU parameters.

The fully programmable firmware enhances the system features and allows users to set

power management, CPU and memory timing, LAN and modem wake-up alarms, and

so on. The firmware can also be used to set parameters for different Celeron processor

clock speeds so that you don’t need to change mainboard jumpers and switches.

Before You Begin

Before you begin to install your MS-7090S mainboard, take some precautions to

ensure that you avoid the possibility of damage to the product from static electricity.

Ensure too that you are installing the mainboard into a suitable case.

Static Electricity

In adverse conditions, static electricity can accumulate and discharge through the

integrated circuits and silicon chips on this product. These circuits and chips are

sensitive and can be permanently damaged by static discharge.

♦If possible wear a grounding wrist strap clipped to a safely grounded device

during the installation.

♦If you don’t have a wrist strap, discharge any static by touching the metal case

of a safely grounded device before beginning the installation.

♦Leave all components inside their static-proof bags until they are required for

the installation procedure.

♦Handle all circuit boards and electronic components carefully. Hold boards by

the edges only. Do not flex or stress circuit boards.

Choosing a Case

The MS-7090S mainboard complies with the specifications for a micro-ATX board.

The micro-ATX format features small size, fewer expansion slots and smaller power

consumption, so that the system case is less expensive. You can also install this kind

of board into a full-size ATX case.

Some features on the mainboard are implemented by cabling connectors on the

mainboard to indicators and switches on the system case. Ensure that your case

supports all the features required. The MS-7090S mainboard can support one or two

floppy diskette drives and four enhanced IDE drives. Ensure that your case has

sufficient power and space for all the drives that you intend to install.

The mainboard has a set of I/O ports on the rear edge. Ensure that your case has an I/O

template that supports the I/O ports and expansion slots.

Mainboard Guide

Use the following illustration and key to identify the components on your mainboard.

1 11

AGP1

CD-IN

CPU FAN1

DIMM1

DIMM3

ATX1

SB LINK1

JP1

FDD1

IDE2

IDE1

CASE FAN1

PANEL1

WOM1

WOL1

ISA1

PCI3

PCI2

JP5

SIR1

SPDIF

SOCKET

PGA 370

DIMM2

PCI1

JP4

JP2

Key to Mainboard Components

Component Description

ISA1 1 x 8/16-bit ISA expansion slots

PCI 1,2,3 3 x 32-bit PCI expansion slots

AGP1 Slot for AGP graphics adapter

SOCKET PGA 370 Processor socket for Celeron processor

DIMM1, DIMM2,

DIMM3 Slots for 168-pin memory modules

FDD1 Connector for floppy disk drives

IDE1, IDE2 Primary and secondary IDE channels

ATX1 Connector for ATX power supply

SIR1 Connector for optional infrared port

PANEL1 Panel connector for switches and indicators

CPU FAN1 Power connector for CPU cooling fan

CASE FAN1 Power connector for case cooling fan

WOM1 Connector for modem wake up

WOL1 Connector for LAN wake up

SPDIF SPDIF In/out connector (professional 24-bit digital audio

interface)

SB LINK1 SB-Link connector for optional PCI Sound Blaster audio

card

CD-IN Audio connector for optional CD-ROM drive

JP1 Clear CMOS memory jumper

JP2 Keyboard power on jumper

JP4 Audio enable/disable jumper

JP5 Set SPDIF output signal level jumper

J2 Auxiliary audio connector for optional CD-ROM drive

Side View of the Input/Output Ports

PS2KBM1

USB1

COM1

COM2

LPT1

Component Description

PS/2 port for pointing device (upper port)PS2KBM1 PS/2 port for keyboard (lower port)

LPT1 External parallel port

J3 (Upper) External game/MIDI port

J3 (Lower) Audio jacks for (from left to right) line out, line in, microphone

COM2 External serial port 2/4

COM1 External serial port 1/3

USB1 Two stacked Universal Serial Bus ports

PreparingtheMainboard

Prepare the main board by installing the Celeron Pentium-II processor and then

installing either 1, 2 or 3 memory modules. This board supports the new generation

Celeron processor that is packaged in a Plastic Pin Grid Array (PPGA) designed to fit

the PGA370 ZIF socket on the mainboard. You can use a Celeron that runs at either

300, 333, 366, 400 or 433 MHz. Next, install one or more memory modules. Finally,

review all the important jumper settings to ensure that the board is configured

correctly.

Table des matières

Autres manuels MATSONIC Carte mère

MATSONIC

MATSONIC MS7380SG Manuel utilisateur

MATSONIC

MATSONIC MS9107C Manuel utilisateur

MATSONIC

MATSONIC MS7381SGM Manuel utilisateur

MATSONIC

MATSONIC MS9147C Series Manuel utilisateur

MATSONIC

MATSONIC EM-5900V Manuel utilisateur

MATSONIC

MATSONIC MS7308E Series Manuel utilisateur

MATSONIC

MATSONIC MS7023D Manuel utilisateur

MATSONIC

MATSONIC MS9087C Manuel utilisateur

MATSONIC

MATSONIC MS7102C Manuel utilisateur

MATSONIC

MATSONIC MS8137C Manuel utilisateur

MATSONIC

MATSONIC MS9327E Series Manuel utilisateur

MATSONIC

MATSONIC MS6391E Manuel utilisateur

MATSONIC

MATSONIC MS7177C Manuel utilisateur

MATSONIC

MATSONIC MS-5120 Manuel utilisateur

MATSONIC

MATSONIC MS6261 Manuel utilisateur

MATSONIC

MATSONIC MS7057C Manuel utilisateur

MATSONIC

MATSONIC MS7132A Manuel utilisateur

MATSONIC

MATSONIC MS7177CT Manuel utilisateur

MATSONIC

MATSONIC MS8177C Series Manuel utilisateur

MATSONIC

MATSONIC MS9027C Manuel utilisateur

MATSONIC

MATSONIC MS8147C Manuel utilisateur

MATSONIC

MATSONIC MS7188DSeries Manuel utilisateur

MATSONIC

MATSONIC MS7191SM Manuel utilisateur

MATSONIC

MATSONIC MS6383E Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur