Kramer TP-410 Manuel utilisateur

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

TP-410

UXGA-Audio-RS-232 Line

Transmitter / DA

P/N: 2900

-000733 Rev 3

TP-410 – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

3Overview 3

3.1 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 4

3.2 Defining EDID 4

3.3 Defining the TP-410 UXGA-Audio-RS-232 Line Transmitter / DA 4

4Installing in a Rack 8

5Connecting the TP-410 9

5.1 Connecting the TP-410 9

5.2 Connecting to the TP-410 via an RS-232 Connection 11

5.3 Connecting to the TP-410 via an RS-485 Connection 11

5.4 Connecting to the TP-410 via the ETHERNET 12

5.5 Connecting Several TP-410 Units 14

6Configuration and Distribution of Control Data 15

6.1 The Local Mode 15

7The SETUP DIP-switches 19

7.1 Setting the Machine Number 19

7.2 Setting the RS-232/RS-485 Baud Rate DIP-switches 20

7.3 Setting the RS-485 Bus Termination 21

8Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 22

9Acquiring the EDID 23

10 Flash Memory Upgrade 24

11 Technical Specifications 25

11.1 Communication Parameters 26

12 Default EDID 27

13 Kramer Communication Protocol 2000 28

Figures

UFigure 1: TP-410 UXGA-Audio-RS-232 Line Transmitter / DA Front PanelU5

UFigure 2: TP-410 UXGA-Audio-RS-232 Line Transmitter / DA Rear PanelU6

UFigure 3: Connecting the TP-410, UXGA-Audio-RS-232 Line Transmitter / DAU10

UFigure 4: RS-232 PinoutU11

UFigure 5: Local Area Connection Properties WindowU13

UFigure 6: Internet Protocol (TCP/IP) Properties WindowU13

UFigure 7: Connecting Multiple TP-410 UnitsU14

UFigure 8: Local Control via RS-232U16

UFigure 9: Control via the EthernetU16

UFigure 10: RS-232 Remote ControlU17

UFigure 11: Connecting Multiple TP-410 Units via RS-485U18

UFigure 12: The Address # DIP-switchesU19

UFigure 13: TP-410 Baud Rate DIP-switchesU20

UFigure 14: TP-410 DIP-switch RS-485 TerminationU21

UFigure 15: CAT 5 PINOUTU22

TP-410 – Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer TP-410 UXGA-Audio-RS-232 Line

Transmitter / DA. This product, which incorporates HDMI™ technology, is ideal for:

•Transmission of video, audio and RS-232 signals for extended distances

over standard STP/UTP cables

•Multimedia and presentation source and acceptor selection

2 TP-410 - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high resolution cables

•Use only the power cord that is supplied with this machine

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer TP-410 away from moisture, excessive sunlight and

dust

TP-410 – Overview 3

3 Overview

The TP-410 UXGA-Audio-RS-232 Line Transmitter / DA is a high performance,

10-channel VGA/UXGA, audio and data to CAT 5 transmitter for high resolution

video, unbalanced stereo audio (or S/PDIF digital audio) and full-duplex RS-232

signals. The CAT 5 input can also be connected to any Kramer compatible TP

transmitter (for example, the TP-125EDID) and the CAT 5 outputs can be

connected to any Kramer compatible TP receiver (for example, the TP-126).

The TP-410 can also route bidirectional data from the RS-232, RS-485 or the

Ethernet port to any or all of the CAT 5 outputs.

TP-410 features:

•VGA up to WUXGA (1920 x 1200) and 2k resolutions

•A selectable local input or twisted pair input (UXGA, audio and RS-232)

•Selectable unbalanced stereo or digital audio S/PDIF input signals

•One local output on a 15-pin HD computer graphics video connector

•One digital audio (S/PDIF) local output on an RCA connector, as well as one

analog audio local output on a 3.5mm mini jack

•10 RJ-45 STP/UTP outputs

•Compatibility with most Kramer twisted pair transmitters/receivers

•EDID (Extended Display Identification Data) that can be copied and stored

from the display device. The display can be disconnected and later

reconnected without rebooting the operating system

•A transmission range of up to 300ft (up to 100 meters) over STP cabling for

the input and outputs

•Control via front panel input select button, RS-232, RS-485 and the Ethernet

•A baud rate of up to 19,200 for sending distributed control data and

configuration commands

•Data - Extensive Bi-Directional RS-232 handling, including embedding and

de-embedding options

4 TP-410 - Overview

In addition, the TP-410:

•Can automatically differentiate between RS-232/RS-485 commands that

control the unit itself and commands that are destined for end-user

equipment (see Section 6

•Is housed in a 19” 1U rack mountable enclosure, with rack “ears” included,

and is fed from a 100-240 VAC universal switching power supply.

)

3.1 Shielded Twisted Pair (STP) / Unshielded Twisted Pair

(UTP)

We recommend that you use Shielded Twisted Pair (STP) cable, and stress that

the compliance to electromagnetic interference was tested using STP cable. There

are different levels of STP cable available, and we advise you to use the best

quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP

is intended for analog signals where skewing is not an issue.

In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-free

cable, Kramer BC-XTP, may be advantageous, and UTP cable might also be

preferable for long range applications. In any event when using UTP cable, it is

advisable to ensure that the cable is installed far away from electric cables, motors

and so on, which are prone to create electrical interference.

3.2 Defining EDID

The Extended Display Identification Data (EDID) is a data-structure provided by a

display, to describe its capabilities to a graphics card (that is connected to the

display’s source). The EDID enables the TP-410 to “know” what kind of monitor is

connected to the output. The EDID includes the manufacturer’s name, the product

type, the timing data supported by the display, the display size, luminance data

and (for digital displays only) the pixel mapping data.

EDID is defined by a standard published by the Video Electronics Standards

Association (VESA).

3.3 Defining the TP-410 UXGA-Audio-RS-232 Line Transmitter

/ DA

This section defines the TP-410.

Figure 1: TP-410 UXGA-Audio-RS-232 Line Transmitter / DA Front Panel

Feature

Function

1 POWER LED Lights when the unit receives power

2 AUDIO LEDs S/PDIF Lights when a local digital audio input is selected

3 ANALOG Lights when a local analog audio input is selected

4 SOURCE LEDs TP Lights when a UXGA/Audio/RS-232 via twisted pair input is selected

5 LOCAL Lights when the local UXGA/Audio/RS-232 input is selected

6 INPUT SELECTOR

Buttons AUDIO Press to select the digital audio source or release to select the analog audio source

7 SOURCE Press to select the twisted pair source or release to select the local source

5TP-410 – Overview

TP-410 – Overview 6

Figure 2: TP-410 UXGA-Audio-RS-232 Line Transmitter / DA Rear Panel

# Feature Function

8 EDID STATUS LED Lights during normal operation; blinks when acquiring the EDID

9 CAPTURE Button Press to acquire the EDID information from the display (see Section 9

10 )

AUDIO

OUT ANALOG 3.5mm Mini

Connector Connect to an unbalanced stereo audio local acceptor to monitor any audio source

11 S/PDIF LOOP RCA Connector Connect to a digital audio local acceptor to monitor any audio source

12 AUDIO

INPUTS S/PDIF AUDIO RCA Connector Connect to the selectable digital audio source

13 ANALOG AUDIO 3.5mm Mini

Connector Connect to the selectable unbalanced stereo audio source

14 TP IN EQ. Trimmer Adjusts the cable compensation (equalization) level for the UXGA (RJ-45 TP input)

Degradation and VGA/XGA signal loss can result from using long cables (due to the effects of

stray capacitance, for example), sometimes leading to a loss of sharpness in high-resolution

signals

Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level

15 LEVEL Trimmer Adjusts the output signal level for the UXGA (RJ-45 TP input)

Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level

16 RJ-45 Connector Connect to the LINE OUT connector of a transmitter (the PINOUT is defined in Section 8

for example, the TP-125EDID

OUT 15-pin HD Connector Connect to a local display to monitor any computer graphics source

18 UXGA IN 15-pin HD Connector Connect to a computer graphics source

19 TP OUTPUTS RJ-45 Connectors Connect to the LINE IN RJ-45 connector on a receiver, for example, the TP-126 (from 1

to 10)

Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in

Section 8

20 )

RS-232 (Tx, Rx, G) Connect to the RS-232 controller (PINs 2, 3 and 5 of a standard 9-pin D-sub connector –

see Section 5.2)

Feature

Function

21 RS-485 (G,B,A) Connect to the RS-485 controller.

Pins B (-) and A (+) are for RS-485; connect pin G to the cable shield (if required)

22 ETHERNET Connector Connects to the PC or other Serial Controller through computer networking

23 FLASH N/A (for factory use only)

24 FACTORY RESET

Turn the machine OFF using the power switch and then turn it ON while pressing the

FACTORY RESET button. The unit will power up and load its memory with the following

factory default definitions: default Ethernet settings (IP address: 192.168.1.39; TCP port

#: 5000 and UDP port #: 50000); RS-232 data is distributed to all 10 outputs and is

received by output 1 and the default EDID is acquired

25 SETUP DIP-switches For setup of the unit (see Section 7

26 )

Power Connector with Fuse AC connector enabling power supply to the unit

27 Power Switch Switch for turning the unit ON or OFF

7TP-410 – Overview

Table des matières

Autres manuels Kramer Émetteur

Kramer

Kramer TWA Manuel utilisateur

Kramer

Kramer F-121UK Manuel utilisateur

Kramer

Kramer TP-551N Manuel utilisateur

Kramer

Kramer TP-102HD Manuel utilisateur

Kramer

Kramer 622T Manuel utilisateur

Kramer

Kramer TA Manuel utilisateur

Kramer

Kramer 614T Manuel utilisateur

Kramer

Kramer WP-110 Manuel utilisateur

Kramer

Kramer WP-110xl Manuel utilisateur

Kramer

Kramer DigiTOOLS KW-11T Manuel utilisateur

Kramer

Kramer TP-590Txr Manuel utilisateur

Kramer

Kramer TP-202 Manuel utilisateur

Kramer

Kramer TP-210A Manuel utilisateur

Kramer

Kramer TOOLS TP-104 Manuel utilisateur

Kramer

Kramer TA-110HD Manuel utilisateur

Kramer

Kramer TP-551N Manuel utilisateur

Kramer

Kramer 671T Manuel utilisateur

Kramer

Kramer PT-571HDCP Manuel utilisateur

Kramer

Kramer F-121 Manuel utilisateur

Kramer

Kramer TP-121EDID Manuel utilisateur

Kramer

Kramer TP-210 Manuel utilisateur

Kramer

Kramer TP-121EDID Manuel utilisateur

Kramer

Kramer TP-780T Manuel utilisateur

Kramer

Kramer TP-580TD Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur