Kramer DIP-20 Manuel utilisateur

DIP-20 Quick Start

P/N:

2900- 301071QS

Rev:

Scan for full manual

DIP-20 Quick Start Guide

This guide helps you install and use your DIP-20 for the first time.

Go to www.kramerav.com/downloads/DIP-20 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

DIP-20 Automatic Video Switcher

1 Bracket set

4 Rubber feet

1 Power adapter (48V)

1 Quick start guide

Step 2: Mount DIP-20

Install DIP-20 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/DIP-20).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/DIP-20).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your DIP-20. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the DIP-20.

Step 4: Set DIP-switches

Video Switching Selection

DIP-switch 1 DIP-switch 2 Video Input Selection

DIP-switch 1

DIP-switch 2

Video Input Selection

Off (up)

Automatic—Last connected. Where more than one source is

connected the last one connected has priority

Off (up)

On (down)

Automatic—Priority selection.

HDMI 1 →HDMI 2 →PC IN (default, high to low priority)

On (down)

Off (up)

Manual

On (down)

Manual

Audio Switching Selection

DIP-switch 3

DIP-switch 4

Audio Input Selection

Off (up)

Automatic—Priority selection.

Embedded HDMI™→analog Audio In (high to low priority)

Off (up)

On (down)

Automatic—Priority selection.

Analog Audio In →embedded HDMI (high to low priority)

On (down)

Off (up)

Embedded HDMI

On (down)

Analog Audio In

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 5: Connect power

Connect the power cord to DIP-20 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate DIP-20

Default IP Parameters

Parameter

Values

Default

Device Name

Any alphanumeric string up to 14 chars (can include hyphen, but not at the beginning or end)

KRAMER_

DHCP

ON/OFF

OFF

IP Address

Any valid IP address

192.168.1.39

Mask

Any valid network mask

255.255.0.0

Gateway

Any valid gateway address

192.168.0.1

TCP Port

0 to 65535

5000

UDP Port

0 to 65535

50000

Default RS-232 Communication Parameters

Parameter

Values

Baud Rate

115200

Data Bits

Stop Bits

Parity

None

Command Format

ASCII

Default Web Pages Logon Authentication

Parameter

Values

Name

Admin

Password

Admin

You can operate the DIP-20 via the front panel buttons, remote P3000 commands, or by using a Web browser to access the

built in Web pages.

Autres manuels pour DIP-20

Table des matières

Autres manuels Kramer Émetteur

Kramer

Kramer TP-114 Manuel utilisateur

Kramer

Kramer PT-571 Manuel utilisateur

Kramer

Kramer Cobra TS2 Manuel utilisateur

Kramer

Kramer TP-145 Manuel utilisateur

Kramer

Kramer WP-110xl Manuel utilisateur

Kramer

Kramer PT-572HDCP+ Manuel utilisateur

Kramer

Kramer TP-581T Manuel utilisateur

Kramer

Kramer TOOLS TP-104 Manuel utilisateur

Kramer

Kramer TP-121EDID Manuel utilisateur

Kramer

Kramer F-121UK Manuel utilisateur

Kramer

Kramer 650T Manuel utilisateur

Kramer

Kramer TP-583T Manuel utilisateur

Kramer

Kramer TA Manuel utilisateur

Kramer

Kramer TOOLS TP-104 Manuel utilisateur

Kramer

Kramer TP-112HD Manuel utilisateur

Kramer

Kramer TP-210 Manuel utilisateur

Kramer

Kramer RC-116 Manuel utilisateur

Kramer

Kramer TP-102HD Manuel utilisateur

Kramer

Kramer WP-580Txr Manuel utilisateur

Kramer

Kramer SID-VGA Manuel utilisateur

Kramer

Kramer TP-752T Manuel utilisateur

Kramer

Kramer 611T Manuel utilisateur

Kramer

Kramer WP-110 Manuel utilisateur

Kramer

Kramer 610T Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur