Huawei SmartAX MA5675 Manuel utilisateur

SmartAX MA5675 Multi-service Access Module

Quick Start

1 Security Warning and Precautions

To use the device properly and safely, read the safety precautions carefully before using

the device and strictly observe these precautions when using the device.

Do not look directly into the optical port without eye protection.

Keep the device out of the reach of children as the components or accessories may be

swallowed.

Install the device in strict compliance with the requirements of the supplier. Reserve

a space of at least 10 cm above and around the device for heat dissipation. During the

installation, keep the device away from electric appliances that generate strong

magnetic or electric fields, such as microwave ovens, refrigerators, and mobile

phones.

The power supply voltage of the device must meet the requirements on the input

voltage of the device.

Do not use any power adapters that are not in the standard configuration. Otherwise,

the device may be abnormal or unsafe.

Dry your hands before connecting or disconnecting cables. Stop the device and

switch off the power before connecting or disconnecting cables.

Do not place any object on the device, so that the device will not be damaged due to

overheating or deformation.

Prevent objects, such as metal, from entering the device through the heat dissipation

hole.

Switch off the power and disconnect all cables, including the power cable, optical

fiber, and network cable, during periods of lightning activities.

Do not lead the strength member of the optical fiber or other metal parts indoors. Do

not install telephone lines, network cables, power adapters or power adapter cables

outdoors. Adopting these measures will help prevent device damage and bodily

injuries which are especially prone during thunderstorms.

If an abnormality occurs, for example, liquid entering the device, smoke, unusual

sound, and smell, stop the device immediately, switch off the power, disconnect all

cables (such as the power cable, optical cable, and network cable) to the device, and

contact the authorized service center.

Do not disassemble the device without permission. In the case of a device fault,

contact the authorized service center.

Dispose of the packing materials, expired batteries, and old or abandoned devices in

accordance to local laws and regulations (recycling them is strongly recommended).

Do not change the structure, safety design, or performance design of the device

without prior authorization.

2 Appearance

The appearance of the MA5675 is as follows:

MA5675 dose not support USB and BBU port.

The figures shown in this document may differ from the actual porduct, but the

difference does not affect the functions of the product.

3 Installing the MA5675

Installation Procedure

MA5675 can be placed on a horizontal workbench or mounted onto a wall horizontally.

The methods for mounting the MA5675 onto a wall are the same. The procedure is as

follows:

Step 1 Mark the positions of two holes (with a spacing listed in the following table) used for

mounting a MA5675.

Step 2 Select a proper drill according to the outer diameter of the screws. Use a hammer drill to

drill the marked positions on the wall. Then clean the wall and install two expansion

bolts.

Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads of the

screws 3 mm over the wall. Then install the MA5675 to the screws.

Horizontal Installation

1. Do not install MA5675 outdoors or on the outdoor cabinets.

2. MA5675 can be mounted onto a wall or be placed on a workbench. Do not install MA5675 in

other modes, such as the ceiling.

4 Connecting Cables

Cable Connections Between the MA5675 and Other Devices

Refer to the preceding cable connections of each product and select the

following corresponding steps to connect the MA5675.

Step 1 Use an optical fiber to connect the OPTICAL port on the MA5675 to the optical port in

the wall.

The optical connector connected to the OPTICAL port is SC/UPC.

Step 2 Use a network cable to connect the LAN port to the Ethernet port of the PC or IP STB.

Step 3 Use a telephone cable to connect the TEL port to the telephone set or fax machine.

Step 4 Use a power cable to connect the POWER port to the power adapter.

Step 5 Press the ON/OFF power button.

Step 6 Press the WLAN switch to enable the Wi-Fi access function. By default, this function is

enabled.

Step 7 Press the WPS switch to enable the WPS encryption function.

Before enabling the WPS encryption function of the MA5675 by pressing the WPS switch,

make sure that the function is configured on the system software beforehand.

5 Logging In to the Web Page

Please log in to the Web page of the MA5675 as follows:

Step 1 Configure the IP address of the PC to be in the same subnet as the LAN IP address of the

MA5675. For example:

IP address: 192.168.100.100

Subnet mask: 255.255.255.0

Step 2 Enter the LAN IP address of the MA5675 in the address bar of the Internet Explorer (IE),

and then press Enter to display the login dialog box.

Step 3 On the login window diglog box, enter the user name root and default password admin,

select Web page language, and then click Login and wait. After the password passes the

authentication, the Web page of the MA5675 is displayed.

6 Configuring Wi-Fi Parameters

Step 1 Step 1 Choose the WLAN tab and choose WLAN Configuration.

Step 2 Step 2 In the pane, select the Enable WLAN option box. In the dialog box that is

displayed, set the basic Wi-Fi parameters, including the SSID, authentication mode, and

encryption mode. For example,

SSID: WirelessNet

Authentication Mode: WPA Pre-Shared Key

Encryption Mode: TKIP

WPA PreSharedKey: Password

SSID indicates the name of a wireless network searched by the Wi-Fi terminal; WPA

PreSharedKey indicates the authentication password for the Wi-Fi terminal to access a

wireless network.

Step 3 Click Apply

7 Description of LEDs

Table 7-1 LED status indications 1

LED

Status

Description

POWER

Green: always on

The device is powered on.

Off

The power supply is cut off.

PON

See Table 7-2.

LOS

See Table 7-2.

LAN1～LAN4

Always on

The Ethernet connection is in

the normal state.

Blinks

Data is being transmitted on

the Ethernet port.

Off

The Ethernet connection is

not set up.

TEL1～TEL4

Always on

The connection to the voice

server is set up.

Blinks quickly (twice per

second)

The connection to the voice

server is set up and the

telephone is in the off-hook or

ringing state.

Blinks slowly (once two

seconds)

The ONU is registering with

the voice server.

Off

The connection to the voice

server is not set up.

WLAN

Always on

The WLAN function is

enabled.

Blinks

Data is being transmitted on

the WLAN port.

Off

The WLAN function is

disabled.

WPS

Always on

The WPS function is enabled.

Blinks

A Wi-Fi terminal is accessing

the system.

Off

The WPS function is disabled.

PON and LOS are GPON LEDs. The status of PON and LOS reflects the connection

between MA5675 and the optical line terminal (OLT). The following table describes the

status of the PON and LOS LEDs.

Table 7-2 LED status indications 2

No.

LED Status

Description

PON

LOS

Off

The MA5675 is disabled by the

OLT.

Blinks quickly

(twice per second)

Off

The MA5675 is attempting to

set up a connection to the OLT.

Always on

Off

The connection between the

MA5675 and the OLT is set up.

Off

Blinks slowly

(once two

seconds)

The Rx optical power of the

MA5675 is lower than the

optical receiver sensitivity.

Blinks quickly

(twice per second)

Blinks quickly

(twice per

second)

The OLT detects that the device

is a rogue ONU.

8 FAQs

The LOS indicator is blinking.

When the LOS indicator blinks slowly, check whether the pigtail fiber is connected normally

and whether the optical connector is contaminated.

When the LOS indicator blinks quickly, check whether the MA5675 transmits optical signals

normally.

The PON indicator is off.

Check whether the optical fiber is properly connected to the OPTICAL port.

The MA5675 fails to register with the OLT. Contact the service provider for help.

How to reset the MA5675?

Press the RESET button by using a needle-type object.

How can I restore factory defaults?

Press RESET button by using a needle-type object for longer than 10s to restore factory

defaults and reset the MA5675. If the indicator is off and then is lit, the system restarts

successfully.

9 Technical Specifications

Item

Specifications

Dimensions (L x W x H)

268 mm x 213 mm x 34 mm

Weight (including the power adapter)

About 800 g

Power supply

11 - 14 V DC, 2 A

Power adapter input

100 - 240 V AC, 50 - 60 Hz

Typical power consumption

15 W

Working temperature

0ºC - 40ºC

Working humidity

5% - 95% (non condensing)

Table des matières

Autres manuels Huawei Unité de contrôle

Huawei

Huawei RMS-SNMP01A Manuel utilisateur

Huawei

Huawei MU509 Series Manuel

Huawei

Huawei UPS5000-E Series Manuel utilisateur

Huawei

Huawei MU609 Manuel

Huawei

Huawei MU609 Instructions d'installation

Huawei

Huawei ICD OPS D Series Manuel utilisateur

Huawei

Huawei ME906s Manuel utilisateur

Huawei

Huawei MU509 Series Instructions d'installation

Huawei

Huawei MU509 Series Manuel utilisateur

Huawei

Huawei MU203 Manuel utilisateur

Huawei

Huawei EM775 Manuel utilisateur

Huawei

Huawei ME906A Instructions de montage

Huawei

Huawei PDC V2.0 Manuel utilisateur

Huawei

Huawei SmartAX MA5600T Mode d’emploi

Huawei

Huawei UPS5000-E-200K-SM Manuel utilisateur

Huawei

Huawei UPS5000-H Series Manuel utilisateur

Huawei

Huawei MU739 Instructions d'installation

Huawei

Huawei EM660 Manuel utilisateur

Huawei

Huawei ME919Bs-567bN Manuel utilisateur

Huawei

Huawei MU509 Series Instructions d'installation

Huawei

Huawei RTN 380H Manuel utilisateur

Huawei

Huawei Atool Manuel utilisateur

Huawei

Huawei MU509 Series Manuel utilisateur

Huawei

Huawei MG301 Instructions d'installation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur