H3C PSR6000 Manuel utilisateur

H3C PSR6000-ACV Power Module

User Manual

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: T2-08012K-20201205-C-1.02

and its licensors

No part of this manual may be reproduced or transmitted in any form

or by any means without prior written consent of New H3C

Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any

trademarks that may be mentioned in this document are the property

of their respective owners.

Notice

The information in this document is subject to change without notice.

All contents in this document, including statements, information, and

recommendations, are believed to be accurate, but they are

presented without warranty of any kind, express or implied. H3C shall

not be liable for technical or editorial errors or omissions contained

herein.

Environmental protection

This product has been designed to comply with the environmental

protection requirements. The storage, use, and disposal of this

product must meet the applicable national laws and regulations.

Documentation feedback

You can e-mail your comments about product documentation to

[email protected]om.

We appreciate your comments

Contents

Introduction························································1

Physical View ···········································································2

Technical Specifications ···························································4

LEDs·························································································5

Installing/Removing the PSR6000-ACV ·············8

Preparations ·············································································8

Installing the Power Module······················································8

Removing the Power Module···············································9

Connecting the Power Cord····················································10

Installing the Cable Retention Clip ····································· 10

Connecting the Power Cord··············································· 11

Introduction

The PSR6000-ACV is a built-in power module with AC input and DC

output. It provides the device with both system power and PoE power,

which can be controlled through separate switches.

Table 1 Features of the PSR6000-ACV

Item Description

Protection

functions

Support input under-/over-voltage protection,

output over-voltage protection, short-circuit

protection, over-current protection, and

overheat protection

Hot swapping Support hot swapping with the power switch

turned off while the device is in operation

Redundancy

backup Support 1 + 1 hot backup and current sharing

CAUTION:

PSR6000

-ACV cannot work with power modules of other

models on the same device.

Physical View

Figure 1 Physical view of the PSR6000-ACV

(1) Captive screws

(2) PoE power switch

(3) Status LEDs (4) Holes for installing a cable

retention clip

(5) System power socket

(6) System power switch

(7) Power module handle

(8) PoE input sockets

As shown in Figure 1, each PSR6000-ACV has four independent AC

input sockets, where,

•

Callout (5) is the system power input socket (SYS IN);

•

Callout (8) is the PoE power input sockets (PoE1, PoE2, and

PoE3).

The PSR6000-ACV is designed with two switches, of which,

•

Callout 6 is used to control the output of the entire power supply

system;

(2)

(4)

(3)

(6)

(7)

(1)

(5)

(8)

•

Callout (2) is used to control the PoE power output.

The PSR6000-ACV provides PoE power output on the premise that:

•

The system power switch is on and the system power output is

normal;

•

The PoE power switch is on and PoE input is available on at

least one of the three PoE sockets.

PoE output power of the PSR6000-ACV varies with number of PoE

power input lines. You can add or remove lines of PoE power

supplies as needed. For details, see Table 2.

In addition to providing dedicated PoE power supplies for devices

supporting PoE, PoE power output can also be used as

supplementary power supply for devices that do not support PoE:

•

With only the system power switch turned on, the maximum

power output of the system is 1150 W (110 VAC) or 1400 W (220

VAC).

•

If the power requirements of the entire system exceed the

maximum system power provided by the PSR6000-ACV, PoE

power output can be used as supplements. To do this, turn on

the PoE power switch and select lines of PoE power supplies as

needed. For details, refer to the installation manual of related

devices.

CAUTION:

•

Input voltage for the system power input, PoE 1, PoE 2, and

PoE 3 must be the same. It can be either 110 VAC or 220

VAC for power supplies of the power module.

•

Turn off the PoE power switch if PoE power supply is not

required by the device. For more information, see the

installation guide or hardware information and specifications

for the device.

Technical Specifications

Table 2 Technical specifications

Item Description

Rated voltage range 100 VAC to 240 VAC;

50 Hz or 60 Hz

Maximum input current per line 16 A

Maximum output current 117 A

Maximum PoE output current 100 A

Max system power output 1150 W (110 VAC)

1400 W (220 VAC)

Max PoE

power output

One line of PoE

input 1200 W (110 VAC)

1800 W (220 VAC)

Two lines of

PoE input 2400 W (110 VAC)

3600 W (220 VAC)

Three lines of

PoE input 3600 W (110 VAC)

5300 W (220 VAC)

Physical dimensions

(H × W × D) 128 × 196 × 380 mm

(5.04 × 7.72 × 14.96 in.)

Temperature

requirements

Operating

temperature 0°C to 45°C (32°F to 113°F)

Storage

temperature –40°C to +70°C (–40°F to

+158°F)

LEDs

Each PSR6000-ACV provides eight red/green bi-color LEDs. Table 3

describes the LEDs of the power module.

Table 3 Description of the LEDs

LED State Description

System

power

input (SYS

IN)

Off No system power input is present.

Green The system power input is normal.

Red The system power input is abnormal.

System

power

output

(SYS

OUT)

Off No system power input is present.

Green The system power output is normal.

Red

The power switch is in the off position.

Power alarm (output short circuit,

output over-current, output

over-voltage, or overheat occurs on the

power module, and the power module

takes a self-protection action)

System fan

(SYS FAN)

Off No system power input is present.

Green The power module fan works normally.

Red

The system switch is in the off position.

The power module fan is faulty (the

power module takes a self-protection

action and stops power output two

seconds after the fan fails.)

LED State Description

PoE power

input (PoE

IN1*)

Off No PoE power input is present.

Green The PoE power input is normal.

Red The PoE power input is abnormal.

PoE power

output

(PoE OUT)

Off No PoE power input is present.

Green The power output is normal.

Red

The power switch is in the OFF

position.

Power alarm (output short circuit,

output over-current, output

over-voltage, or overheat occurs to the

power module, and the power module

takes a self-protection action).

PoE fan

(PoE FAN)

Off No PoE power input is present.

Green The PoE fan works normally.

Red

The PoE switch is in the off position.

The PoE fan is faulty (the PoE module

takes a self-protection action and stops

power output two seconds after the fan

fails.)

Note*: Description for PoE IN1, PoE IN2, and PoE IN3 is the

same.

CAUTION:

•

The power module provides PoE power output only if the

system power output is normal.

•

It would be normal that the power LED remains on for a

period of time after you turn off the power switch.

•

Avoid turning on and off the power switch frequently.After

turning off the power switch, wait at least 30 seconds before

turning it on again.

Table des matières

Autres manuels H3C Unité de contrôle

H3C

H3C SecBlade Manuel utilisateur

H3C

H3C LSVM152SCFAN Manuel utilisateur

H3C

H3C LSVM1S9810FAN Manuel utilisateur

H3C

H3C SecPath DC2400 Manuel utilisateur

H3C

H3C LSQM1SDNB0 Manuel utilisateur

H3C

H3C PSR2400-54A Manuel utilisateur

H3C

H3C PSR450-12A Manuel utilisateur

H3C

H3C PSR650C-12A Manuel utilisateur

H3C

H3C MSR Router Comware 5 Series Manuel utilisateur

H3C

H3C SecPath NSQ1FAB04B0 Manuel utilisateur

H3C

H3C PSR2400-12AHAH-B Manuel utilisateur

H3C

H3C SecPath M9000 NSQM1MBFEA0 Manuel utilisateur

H3C

H3C SR6600 SPE-FWM Manuel utilisateur

H3C

H3C SIC-4G-CAT6 Manuel utilisateur

H3C

H3C LSXM1SEERBXD2 Manuel utilisateur

H3C

H3C LSQM1TGT24FD0 Manuel utilisateur

H3C

H3C LSVM1S9800FAN Manuel utilisateur

H3C

H3C S9500E Series Manuel de la liste des pièces

H3C

H3C PSR3000-54A Manuel utilisateur

H3C

H3C EWPA1PCID Manuel utilisateur

H3C

H3C SecPath PSR300-12A2 Manuel utilisateur

H3C

H3C SecPath M9000-AI NSQM5AIASKA1 Manuel utilisateur

H3C

H3C SR6600 SPE-FWM-200 Manuel utilisateur

H3C

H3C Campus SeerEngine LSXM1SEERBXC2 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur