Windsor Clipper CLP12IA Caractéristiques techniques

Read these instructions before operating the machine

Bitte lesen Sie diese Anleitungen, bevor Sie die Maschine in Gebrauch nehmen

Operating Instructions (GB/USA)

Bedienungsanleitung (GER)

86038280 04/26/11

PRV NO. 98656

CARPET EXTRACTOR

MODEL: COUNTRY

CLP12IA - 10080090 AUSTRALIA

CLP12IB - 10080100 BRITIAN

CLP12IE - 10080110 EUROPE

CLP12IS - 10080120 SWITZERLAND

IPX4

MACHINE DATA LOG

86038280 04/26/11

2ENG

Warranty Registration

Thank you for purchasing a Windsor product. Warranty registration is quick and easy.

Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to:

www.windsorind.com/WarrantyRegistration.aspx

For customer assistance:

1-800-444-7654

TABLE OF CONTENTS

86038280 04/04/07

3EN

Machine Data Log................................................2

Table of Contents.................................................3

HOW TO USE THIS MANUAL

How to use this Manual........................................1-1

SAFETY

Important Safety Instructions ...............................2-1

Hazard Intensity Level..........................................2-2

Grounding Instructions.........................................2-3

OPERATIONS

Technical Specifications.......................................3-1

Components/Controls ..........................................3-2

Machine Operation...............................................3-5

Filling the Solution Tank....................................3-7

Cleaning............................................................3-8

Accessory Tool Usage....................................3-11

MAINTENANCE

Vacuum Motor......................................................4-1

Solution Pump......................................................4-2

Belt Replacement.................................................4-2

Periodic Maintenance...........................................4-3

Daily/Regular Maintenance..................................4-3

Machine Troubleshooting.....................................4-4

GROUP PARTS LIST

Brush..................................................................5-1

Control Panel......................................................5-3

Frame.................................................................5-5

Pump..................................................................5-7

Recovery Tank...................................................5-11

Solution Tank .....................................................5-13

Vacuum Shoe.....................................................5-15

Wiring – Schematic ............................................5-17

Suggested Spare Parts......................................5-18

EC Declaration of Conformity.............................5-19

HOW TO USE THIS MANUAL

86038280 04/26/11

1-1ENG

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized Windsor

dealers. When placing an order for parts, the

machine model and machine serial number are

important. Refer to the MACHINE DATA log which is

filled out during the installation of your machine. The

MACHINE DATA log is located on the inside of the

front cover of this manual.

The model and serial number of your machine is on

the bottom back-end of the machine.

The SAFETY section contains important information

regarding hazard or unsafe practices of the

machine. Levels of hazards is identified that could

result in product or personal injury, or severe injury

resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The MAINTENANCE section contains preventive

maintenance to keep the machine and its

components in good working condition. They are

listed in this general order:

-Vacuum Motor

-Solution Pump

-Belt Replacement

-Periodic Maintenance

-Daily/Regular Maintenance

-Machine Troubleshooting

The PARTS LIST section contains assembled parts

illustrations and corresponding parts list. The parts

lists include a number of columns of information:

-REF – column refers to the reference

number on the parts illustration.

-PART NO. – column lists the part

number for the part.

-PRV NO. – reference number.

-QTY – column lists the quantity of the

part used in that area of the machine.

-DESCRIPTION – column is a brief

description of the part.

-SERIAL NO. FROM – column indicates

the first machine the part number is

applicable to. When the machine design

has changed, this column will indicate

serial number of applicable machine.

The main illustration shows the most

current design of the machine. The

boxed illustrations show older designs. If

column has an asterisk (*), call

manufacturer for serial number.

-NOTES – column for information not

noted by the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the

front cover is the part number for this manual.

86038280 04/04/07 2-1EN

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

This machine is for commercial use.

To reduce the risk of fire, electric shock, or injury:

Connect to a properly grounded outlet.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or

service.

Use only indoors. Do not use outdoors or expose to rain.

Do not allow machine to be used as a toy. Close attention is necessary when used by or near children.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding the

machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into

water, return it to an authorized service center.

Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord around sharp

edges or corners.

Do not run machine over cord. Keep cord away from heated surfaces.

Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord.

Do not handle the electrical plug or machine with wet hands.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

This machine is not suitable for picking up health endangering dust.

Turn off all controls before unplugging.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near

flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops

and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

If foam or liquid comes out of machine, switch off immediately.

SAVE THESE INSTRUCTIONS

HAZARD INTENSITY LEVEL

86038280 04/04/07

2-2ENG

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR

SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property

damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating

condition. Following is information that signals some potentially dangerous conditions to the operator or the

equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on

the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the

machine. Use Windsor approved replacement parts.

!WARNING

!CAUTION

GROUNDING INSTRUCTIONS

86038280 04/04/07

2-3EN

THIS PRODUCT IS FOR COMMERCIAL USE

ONLY.

ELECTRICAL:

The amp, hertz, and voltage are listed on the data

label found on each machine. Using voltages above

or below those indicated on the data label will cause

serious damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size must be at

least one size larger than the power cord on the

machine, and must be limited to 50 feet (15.5m) in

length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should

malfunction or break down, grounding provides a

path of least resistance for electric current to reduce

the risk of electric shock. This appliance is equipped

with a cord having an equipment-grounding

conductor and grounding plug. The plug must be

inserted into an appropriate outlet that is properly

installed and grounded in accordance with all local

codes and ordinances.

Improper connection of the equipment-

grounding conductor can result in a risk of

electric shock. Check with a qualified electrician

or service person if you are in doubt as to

whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it

will not fit the outlet, have a proper outlet

installed by a qualified electrician.

TECHNICAL SPECIFICATIONS

86038280 04/04/07

3-1EN

ITEM DIMENSION/CAPACITY

Electrical 230-240V, 7A, 50 HZ

Electric Vacuum Motor (1) 3 stage, 1 hp, 99 cfm (2.80 cubic m/min.)

Waterlift 117” (297cm)

Brush (1) 18” (45.7cm.)

Brush Speed 1000 rpm

Solution Pump 100 PSI, diaphragm style, internal bypass

Solution Capacity 12 gallons (45.5l)

Solution Spray 2 quick change jets.

Recovery Capacity 12 gallons (45.5l)

Vacuum Shoe 20” (51 cm) cast aluminum with spring loaded down

pressure

Wheels (2) 10” dia. (25cm) wheels by 2”

Dimensions - Weight 105lbs. (48kg)

Dimensions - Length 28” (71cm)

Dimensions - Height 46” (117cm)

Dimensions - Width 24” (61cm)

Power Cable 50’ (12.7m) (1mm)

28”

(71cm)

46”

(117cm)

24”

(61Cm)

CONTROLS/COMPONENT LOCATIONS

86038280 04/04/07 3-2EN

1. Main Handle. Used to pull and maneuver

machine.

2. Handle Adjustment. Used to adjust height of

handle, and allow machine to be used in “PUSH”

or “PULL orientation.

3. Electrical Cord.

4. Solution Switch. Turns on pump. Continuous

position (bottom) activates electro-valve to

dispense solution to floor through jets.

Intermittent position (up) requires operator to

depress 1 of 3 trigger switches to dispense

solution. Center position is off.

5. Brush Motor Switch. Turns on brush motor.

6. Vacuum Motor Switch. Turns on vacuum

motor.

7. Trigger Switches. Activates electro-valve to

dispense solution to floor through jets when

solution switch is in the intermittent position.

8. Brush Motor Circuit Breaker. 4 amp. Breaker

protecting brush motor.

9. Vacuum Motor Circuit Breaker. 7 amp.

Breaker protecting vacuum motor.

10. Recovery Dump Hose. Facilitates draining

dirty cleaning solution.

8 9 4 6

CONTROLS/COMPONENT LOCATIONS

86038280 04/04/07

3-3EN

1. Solution Accessory Tool Hookup. Used for

various auxiliary cleaning tools.

2. Vacuum Hose Door. Used to connect various

auxiliary 1 ½ inch cleaning tool vacuum hoses.

3. Brush Height Adjustment. Used to regulate brush

height from storage position to various carpet

heights.

4. Recovery Tank. Used to collect dirty cleaning

solution.

5. Solution Tank. Used to hold cleaning solution.

6. Solution Dump Hose. Facilitates draining excess

cleaning solution from solution tank.

7. Recovery Tank Dome.

8. Solution Tank Lid.

9. Solution Tank Fill Hose.

10. Vacuum Shoe.

11. Brush Housing.

12. Front Lifting Handle.

13. Cleaning Solution Filter.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Windsor Machine de plancher

Windsor

Windsor Compass 2 10070560 Manuel utilisateur

Windsor

Windsor STORM SP13 Manuel utilisateur

Windsor

Windsor Clipper Duo Manuel utilisateur

Windsor

Windsor CDT7IA/10080050 Manuel utilisateur

Windsor

Windsor GROUTHOG GH3 Manuel utilisateur

Windsor

Windsor Dominator 200 NWWE2220N Manuel utilisateur

Windsor

Windsor PASSPORT PSP-IG Manuel utilisateur

Windsor

Windsor Voyager 2 VGR2 Manuel utilisateur

Windsor

Windsor Admiral ADM8I Manuel utilisateur

Windsor

Windsor 10080480 Manuel utilisateur

Windsor

Windsor Chariot iScrub Manuel utilisateur

Windsor

Windsor CB20 Caractéristiques techniques

Windsor

Windsor Walk Behind Scrubber SCE326 Manuel utilisateur

Windsor

Windsor CB20 Manuel utilisateur

Windsor

Windsor Saber Glide 30 Manuel utilisateur

Windsor

Windsor Pivot Manuel utilisateur

Windsor

Windsor CDT7IB/10080060 Manuel utilisateur

Windsor

Windsor Clipper Duo Manuel utilisateur

Windsor

Windsor MPRO 10080390 Manuel utilisateur

Windsor

Windsor PRESTO! PRSIFB2 Manuel utilisateur

Windsor

Windsor LB2000I Manuel utilisateur

Windsor

Windsor SCC172 Manuel utilisateur

Windsor

Windsor LB1500 Manuel utilisateur

Windsor

Windsor VOYAGER 2 Manuel utilisateur

Manuels Machine de plancher populaires d'autres marques

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuel utilisateur

Numatic

Numatic ET 4045 Manuel utilisateur

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur

Mytee

Mytee 8070 Mytee-Lite Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Triple S

Triple S Ace 26T1 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuel utilisateur

Tornado

Tornado Marathon 2000 98190 Manuel

Numatic

Numatic TTB 1117/100 Manuel utilisateur

Tennant

Tennant 8210D Manuel utilisateur

Nobles

Nobles Frontier Manuel du produit

lavina

lavina 21-X Manuel utilisateur

KENT

KENT Edge 28B Manuel utilisateur

Tennant

Tennant 215 Manuel du produit

CleanFreak

CleanFreak DURA-18HD Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guide de l'administrateur

BETCO

BETCO PB24 Manuel utilisateur

IPC

IPC CT51-71 BT Manuel utilisateur