VEVOR CY-SF03 Manuel utilisateur
Technical Support and E-Warranty Certificate www.vevor.com/support
ROOF RAKE
USER MANUAL
MODEL: CY-SF03
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
1
MODEL: CY-SF03
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
ROOF RAKE
2
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can
result in serious injury.
Assembly precautions
1. Assemble only should be according to these instructions. Improper
assembly can result in hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6. The product capabilities apply to properly and completely assembled
products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the roof rake.
8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap
and separate all parts in a clean work area.
Use precautions
1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this
item.
3. Use as intended only.
4. Inspect before every use; do not use if parts are loose or damaged.
5. The shape is for reference only. The actual shape shall prevail.
SAVE THESE INSTRUCTIONS
3
PARTS LIST
1. Roof rake head 5.Handle grip 9. Short bolts (2)
2. Metal braces (2) 6.Pole handle 10. Nuts (3)
3. Metal braces (2) 7. Pole extensions (4) 11.Hex wrench
4. Pole adapter 8.Long bolt 12. Open wrench
13.Ring handle
4
ASSEMBLY STEP
Roof Rake Head Assembly
The assembly of the roof rake head requires hardware (the nut and bolts) included
in the pack. Use the equipped open wrench for the nut and the hex wrench for
bolts.Make sure to tighten the hardware connections for a secure assembly.
STEP1
Depress the small buttons on the pole adapter and insert the pole
adapter into the connector on the back of the roof rake head.Push
firmly until the two small buttons pop up in the holes on the connector.
5
STEP2
Align the holes of the metal braces with the hole on the end of the pole
adapter. Secure them with the long bolt and one nut.
STEP3
Connect the metal braces to the rake head with 2 small bolts as shown.
6
STEP5
If additional reach is needed, connect the provided pole extensions
between the pole handle and the rake head assembly. Make sure the
small buttons pop up in the hole on the pole,so the assembly is
secured.Finally,assemble the Ring handle to a suitable position.
STEP4
To connect the roof rake head assembly with the pole handle, depress
the small button at the end of the pole handle and insert it into the end
of the pole adapter. Make sure the small button pops up in the hole on
the pole adapter so the assembly is secured.
7
NOTE：Make sure the pole handle is the last piece of the assembly.
NOTE: Only connect the minimum number of pole extensions needed to reach
the roof. This will minimize the weight of the roof rake and reduce the effort
required.
PRODUCT PARAMETER
Package size（mm）
1300*182*85
Size（mm）
6445*635*150
N.W（kg）
3.26
G.W（kg）
3.91
Colour
aluminium
Type
25 "aluminum alloy scraper
Scraper material
aluminium alloy
Scraper width
25 ”
Handle material
TPR
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten, Germany
UK REP：Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston,
United Kingdom
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Made In China
Table des matières
Autres manuels VEVOR Outils
VEVOR
VEVOR ECBS01 Manuel utilisateur
VEVOR
VEVOR FSH-Y10 Manuel utilisateur
VEVOR
VEVOR HL-XW30 Manuel utilisateur
VEVOR
VEVOR JY-SS2L Manuel utilisateur
VEVOR
VEVOR LD-801 Manuel utilisateur
VEVOR
VEVOR RC-2005F Manuel utilisateur
VEVOR
VEVOR CB07 Manuel utilisateur
VEVOR
VEVOR KT1106A Manuel utilisateur
VEVOR
VEVOR 9526 Manuel utilisateur
VEVOR
VEVOR 5607 Manuel utilisateur
VEVOR
VEVOR CT-612 Manuel utilisateur
VEVOR
VEVOR JT-1632 Manuel utilisateur
VEVOR
VEVOR SMS-025 Manuel utilisateur
VEVOR
VEVOR FT-1530 Manuel utilisateur
VEVOR
VEVOR KT1103A Manuel utilisateur
VEVOR
VEVOR WK3552E-5 Manuel utilisateur
VEVOR
VEVOR SW-WP003 Manuel utilisateur
VEVOR
VEVOR FTC5220 Manuel utilisateur
VEVOR
VEVOR EB-1550 Manuel utilisateur
VEVOR
VEVOR 19985-SN Manuel utilisateur
