VEVOR XRS026 Manuel utilisateur
Technical Support and E-Warranty Certificate
www.vevor.com/support
POCKET HOLE JIG
MODEL:XRS026
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the
major top brands and doses not necessarily mean to cover all categories of tools offered by
us. You are kindly reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.
- 1 -
MODEL:XRS026
Have product questions? Need technical support? Please feel free to
contact us:
CustomerSe[email protected]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
POCKET HOLE JIG
- 2 -
INSTRUCTIONS
Thank you very much for choosing this hole jig . Please read all of the instructions
before using it.The information will help you achieve the best possible results.
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
Warning- Be sure to wear eye protectors when using this product.
Caution! Wear a breathing mask. Dust which is injurious to
health can be generated when working on wood and other
materials.
WARNING!
Read and understand all instructions before using this pocket hole jig. The
operator must follow basic precautions to reduce the risk of personal injury and/or
damage to the equipment. Keep this manual for safety warnings, precautions,
operating or inspection and maintenance instructions.
WORK AREA
1.Operate in a safe work environment. Keep your work area clean, well-lit and
free of distractions.
2. Keep anyone not wearing the appropriate safety equipment away from the
work area.
3. Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock pocket hole jig away and keep out of the reach of children.
PERSONAL SAFE TY
WARNING! Always Wear personal protective equipment.
PERSONA L PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side protection for
the eyes. Eye protection equipment should comply with CSA Z94.3-07 or ANSI
Z87.1 standards based on the type of work performed.
2. Wear gloves that provide protection based on the work materials or to reduce
the effects of tool vibration.
3. Wear protective clothing designed for the work environment and pocket hole jig.
4. Non-skid footwear is recommended to maintain footing and balance in the work
environment.
- 3 -
PERSONAL PRECAUTIONS
Control the pocket hole jig, personal movement and the work environment to
avoid personal injury or damage to pocket hole jig.
1. Do not operate any pocket hole jig when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the moving
parts of a tool. Keep long hair covered or bound.
SPECIFIC SA FETY PRECAUTIONS
1. Use the correct pocket hole jig for the job. This pocket hole jig was designed for
a specific function. Do not modify or alter this pocket hole jig or use it for an
unintended purpose.
2. Keep body parts away from pinch areas while using.
3. Children are not allowed to operate this product unless accompanied by an
adult
4. Pay attention to safety during use to avoid crushing fingers.
WARNING!
DO NOT let comfort or familiarity with product (gained from repeated use) replace
strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
Model and Parameters
Structure Diagram
A: 1 x Pocket Hole Jig
B: 1 x Cross Bits
C: 1 x Drill Bits
D: 1 x Clamping Pliers
E: 1 x Stop Collar
F: 1 x Hex Key
G: 50 x Screws
Model
XRS026
Number of Drilling Holes
2
Number of Chip Removal Holes
2
- 4 -
Assembly and Use
1. Adjustable Thickness Setting
Measure the thickness of your board.
You can quickly adjust the location of the slider according to the thickness of the
board.
2. Quick Fixture
Adjust the opening size of the pliers by the bolt (slightly less than the thickness of
the plate and fixture combined)，Pulling the trigger causes the clamp to be fixed.
3. Adjust the depth of the hole
The stop collar is locked on the drill bits at a position equal to L1 as shown.
- 6 -
Troubleshooting Instruction
Problem
Reasons
Solution
There are burrs around
the hole.
This speed is too slow.
Adjust the rotation speed
of the screwdriver.
The hole was pierced.
1. The hole was drilled
too deep.
2. The hole jig is not
secured.
1. Adjust the stop collar
to the proper position on
the drill bit.
2. Use the pliers to
ensure the tool is
secured.
3. Buy the screws of
appropriate length
Maintenance
1.Make sure that the drill is parallel to the direction of force，the hole sleeve not
easy to wear.
2.Wipe the anti-rust oil after using the drill to avoid rust.
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E
RANCHO CUCAMONGA, California, 91730 United States of America
MADE IN CHINA
Table des matières
Autres manuels VEVOR Outils
VEVOR
VEVOR LD-868 Manuel utilisateur
VEVOR
VEVOR LD-801 Manuel utilisateur
VEVOR
VEVOR FSH-Y10 Manuel utilisateur
VEVOR
VEVOR JK601 Manuel utilisateur
VEVOR
VEVOR RC-2005F Manuel utilisateur
VEVOR
VEVOR CB07 Manuel utilisateur
VEVOR
VEVOR JH-0840 Manuel utilisateur
VEVOR
VEVOR KT1106A Manuel utilisateur
VEVOR
VEVOR JY-SS2L Manuel utilisateur
VEVOR
VEVOR JK603 Manuel utilisateur
VEVOR
VEVOR XF-E004A-2 Manuel utilisateur
VEVOR
VEVOR WK3552E-5 Manuel utilisateur
VEVOR
VEVOR SW-WP003 Manuel utilisateur
VEVOR
VEVOR YL-15T Manuel utilisateur
VEVOR
VEVOR XRSS2305 Manuel utilisateur
VEVOR
VEVOR GZL66 Manuel utilisateur
VEVOR
VEVOR KT1103A Manuel utilisateur
VEVOR
VEVOR JT-1632 Manuel utilisateur
VEVOR
VEVOR 19985-SN Manuel utilisateur
VEVOR
VEVOR HL-XW30 Manuel utilisateur
