VEVOR 19985-SN Manuel utilisateur
Technical Support and E-Warranty Certificate www.vevor.com/support
KNOB HANDLESETS
MODEL: 19985-SN / 20185-AC / 20185-10B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools with
us compared to the major top brands and does not necessarily mean to cover all
categories of tools offered by us. You are kindly reminded to verify carefully when
you are placing an order with us if you are actually saving half in comparison with
the top major brands.
- 1 -
MODEL: 19985-SN / 20185-AC / 20185-10B
NOTE: The shown is for illustration purposes only. Please refer to the
color you purchased.
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
KNOB HANDLESETS
- 2 -
SAFETY INSTRUCTIONS
1. This product contains small parts. If swallowed, it will pose a choking
hazard. Keep these small parts away from children !
2. Read, understand and follow your power tool manufacturer's
instructions for safety. Always wear safety glasses or eye shields before
assembly and commencing power tool operation. Always keep hands,
face, hair, loose clothing, and body at a safe distance from spindles and
cutting tools. Always keep a firm grip on tool handles when in operation.
Always disconnect from the power source before adjusting power tools.
MODEL AND PARAMETERS
Model 19985-SN 20185-AC 20185-10B
Color Satin Nickel Antique Copper Matte Black
Applicable Door
Thickness
1-3/8"~1-3/4"
Latch Length 2-3/8" and 2-3/4"
Pitch-row(Door Handle) 7-11/16"－8-13/16"
- 3 -
STRUCTURE DIAGRAM AND COMPONENTS
No. Name and Qty No. Name and Qty
1Front Handle x 1 2A Latch A x 1
2B Lower Latch x 1 3Cylinder x 1
4Deadbolt Rose x 1 5Strike Plate x 1
6Back Knob x 1 7Strike Plate x 1
8Strike Box x 1 9Screws x 8
10 Pin x 1 11 Door Key x 3
12 Washer x 1 13 User Manual x 1
1
2B
3
4
56
8
7
9
2A
10
11
12
13
- 4 -
INSTALLATION
1. MARK DOOR & BORE HOLES(Please refer to the attached opening diagram.)
A: Fold template over edgeof door,mark site 60mm or70mm of holes.
B: Bore the Φ54mm andΦ25mm holes through the door.
C: Cut out a 58x26x3mm base.
2. INSTALL THE LATCH
According to the site of lock holes to adjust the latch for 60mm or 70mm.
- 5 -
NOTE: The cam is pushed fully to the right for 70mm backset.(During the
adjustment, keeping two teeth of the cam to forward always.)
3. INSTALL EXTERIOR HANDLE MECHANISM
Place the front handle with stems and square spindle into the latch as
shown. Press tightly against the door face.
4. INSTALL THE INTERIOR KNOBS
After the front handle is in position, install the interior knoband tighten
screws. Insert screw through washer and into bottom hole tighten firmly.
Front Handle
(It is used to remove the back knob
after inserting the hole.)
- 6 -
5. INSTALL THE STRIKES
MAINTENANCE
1. Do not strike with force to avoid damage to the latch and door frame.
2. If there is dirt, use a dry cloth to remove, do not scrub with chemicals such as
dishwashing liquid. Otherwise, it will destroy the protective film of exposed parts
and cause fading.
3. Periodically (half a year or once a year) or when the key is not smoothly
inserted and removed, graphite powder (pencil powder) can be added in the
keyhole to lubricate.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten, Germany
UK REP：Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston,
United Kingdom
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW
2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Made In China
The locking bar is
pressed down when
the door is closed.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels VEVOR Outils
VEVOR
VEVOR LD-801 Manuel utilisateur
VEVOR
VEVOR RC-2005F Manuel utilisateur
VEVOR
VEVOR 3 IN 1/305 Manuel utilisateur
VEVOR
VEVOR GZL66 Manuel utilisateur
VEVOR
VEVOR JK601 Manuel utilisateur
VEVOR
VEVOR HKB1040A Manuel utilisateur
VEVOR
VEVOR XRS026 Manuel utilisateur
VEVOR
VEVOR 5607 Manuel utilisateur
VEVOR
VEVOR FSH-Y10 Manuel utilisateur
VEVOR
VEVOR JY-SS2L Manuel utilisateur
VEVOR
VEVOR KT1106A Manuel utilisateur
VEVOR
VEVOR LM20 Manuel utilisateur
VEVOR
VEVOR XF-E004A-2 Manuel utilisateur
VEVOR
VEVOR KT1103A Manuel utilisateur
VEVOR
VEVOR YL-15T Manuel utilisateur
VEVOR
VEVOR KH2000B Manuel utilisateur
VEVOR
VEVOR SMS-025 Manuel utilisateur
VEVOR
VEVOR CB07 Manuel utilisateur
VEVOR
VEVOR XRSS2304 Manuel utilisateur
VEVOR
VEVOR WK3552E-5 Manuel utilisateur
