VEVOR LD-801 Manuel utilisateur
Technical Support and E-Warranty Certificate www.vevor.com/support
PNEUMATIC GREASE GUN
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL: LD-801
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Pneumatic Grease Gun
- 2 -
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow
all instructions listed below may result in serious injury.
Various dangers may occur if the grease gun is improperly handled during
installation, commissioning and daily operation.
Risk of injury and damage to material property because of improper
handling.
Hold the manual at the disposal of the operating staff at the usage site of
the unit.
Country-specific safety measures and accident prevention regulations
must be observed.
Only qualified and authorized persons are allowed to operate the grease
gun.
Persons are qualified if they are, due to their training, experience,
instruction and knowledge of the relevant standards, able to assess
assigned tasks and to identify potentially hazardous situations.
All persons charged with installation, operation, maintenance and repair
work, must have read and understood this operation instructions.
Always wear safety glasses when using a grease gun. Keep work
area clean and remove any excess grease from tools, hands, and
clothing after use. Do not use grease gun whip hose for other
applications or at pressure levels above rated pressures.
CAUTION: Excess pressure can result in the bursting of the grease gun
head and of accessories!
Excess pressure at the greasing point can damage the grease nipple and
even the machine.
Comply with the machine manufacturer‘s maintenance and service
- 3 -
instructions
Disconnect the compressed air line supply before servicing the
Gun.
Defective accessories can lead to personal injury and material damage.
Grease hoses must not be kinked, twisted or stretched.
During their period of use, accessories must be checked for wear,cracks,
and other damage.
Defective accessories should be replaced immediately.
Do not open the grease gun when it is under pressure!
Every time that the grease gun head and barrel are to be separated, the
push rod must be fully retracted and automatically locked by means of the
safety catch.
Excess pressure can result in the bursting of the grease gun head and of
Equipment.
SAVE THESE INSTRUCTIONS.
- 5 -
STRUCTURE DIAGRAM
1.Quick Coupler Air Fitting
2.Pumping Chamber
3.Barrel
4. Plunger Rod Handle
5. Safety Catch
6. Trigger
1
2
3
4
5
6
- 6 -
COMPONENTS
LD-801
Grease Gun
1
Grease Hose
1
Bent Metal Pipe
1
Coupler
1
Pointed Coupler
1
Locking Clamp Coupler
1
User Manual
1
Mode
l
Parts
- 7 -
OPERATING INSTRUCTIONS
Step1：Hold the head of the grease gun and unscrew the barrel.
Step2：Pull back the plunger rod handle and fill the barrel with grease.
- 8 -
Grease filling options:
1) Cartridge Loading: Remove the plastic cap from the cartridge
and insert the open end of the cartridge into the grease gun barrel until the
rim of the pull-tab end meets the rim of the barrel.
2) Suction Fill: Insert the open end of the barrel about 2” into the grease
container.Slowly pull the plunger rod handle to draw in grease into the
empty barrel while pushing the barrel deeper into the grease until the
plunger rod is completely extended.The outside surface may have a lot of
grease stuck to it and should be wiped clean for safety.
Table des matières
Autres manuels VEVOR Outils
VEVOR
VEVOR 19985-SN Manuel utilisateur
VEVOR
VEVOR FSH-Y10 Manuel utilisateur
VEVOR
VEVOR RC-2005F Manuel utilisateur
VEVOR
VEVOR GZL66 Manuel utilisateur
VEVOR
VEVOR CY-SF03 Manuel utilisateur
VEVOR
VEVOR HKB1040A Manuel utilisateur
VEVOR
VEVOR JK603 Manuel utilisateur
VEVOR
VEVOR 5609 Manuel utilisateur
VEVOR
VEVOR LM20 Manuel utilisateur
VEVOR
VEVOR CB07 Manuel utilisateur
VEVOR
VEVOR HL-XW30 Manuel utilisateur
VEVOR
VEVOR KH2000B Manuel utilisateur
VEVOR
VEVOR EB-1550 Manuel utilisateur
VEVOR
VEVOR 3 IN 1/305 Manuel utilisateur
VEVOR
VEVOR JY-SS2L Manuel utilisateur
VEVOR
VEVOR XRSS2304 Manuel utilisateur
VEVOR
VEVOR XF-E004A-2 Manuel utilisateur
VEVOR
VEVOR LD-868 Manuel utilisateur
VEVOR
VEVOR SMS-025 Manuel utilisateur
VEVOR
VEVOR 9526 Manuel utilisateur
