Tripp Lite SmartPro Rackmount SMX1500XLRT2U Guide de configuration

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: SMX1500XLRT2U

SmartPro 1.5kVA Line Interactive Sine Wave UPS, Extended-run & SNMPWEBCARD options, 2U Rack/Tower,

USB, Serial, EPO, 230V

Highlights

1500VA / 1.5kVA line interactive 2U rack / tower UPS; Sine wave output

230V nominal output during brownouts to 151V and overvoltages to 282V

USB, RS232, EPO and optional SNMP/Web card interface

Expandable runtime, Status LEDs with load and battery capacity display

3 independently switchable output load banks; 13.5 in / 34.3 cm depth

C14 input; 8 C13 outlets; Includes 2 C13 to C14 cables

Description

Tripp Lite's SMX1500XLRT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment

damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large

internal batteries offer 18 minutes half load runtime and 7 minutes at full load. Runtime is expandable with optional BP36V15-2U external battery

pack (limit 1) or BP36V42-3U (multi-pack compatible). Maintains regulated 230V nominal output without using battery power during brownouts and

overvoltages from 151 to 282V. 1500VA/1000 watt power handling capability and full time sine wave output offers guaranteed compatibility with

networking, telecom and other sensitive electronic applications. Includes a total of 8 outlets with 3 load banks that are individually switchable via

software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment.

Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS

monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD

adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or

emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade

AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive

all-black color scheme.

Package Includes

SMX1500XLRT2U UPS System with mounting hardware

Two 1.8m IEC320-C13 to C14 load jumper cables

Cabling for USB & DB9 monitoring and EPO switching

PowerAlert unattended shutdown and UPS/Power monitoring software

Warranty information and instruction manual

Features

SMX1500XLRT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during

brownouts and overvoltages, plus network-grade AC surge suppression

1500VA/1000 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and

other sensitive electronic devices

Supports 2U rackmount installation in 4 post equipment racks, 2 post rackmount installation requires 2POSTRMKITWM, upright tower

installation requires 2-9USTAND accessory

Large internal batteries support a max load of 1500VA for 7 minutes and a half load of 750VA for 18 minutes

Expandable runtime with BP36V15-2U (limit 1) or with multiple BP36V42-3U rack/tower external battery packs

Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V

Includes 8 UPS supported outlets arranged in 3 individually controllable load banks (2 outlets per bank) that can be powered off and back

on again via software interface

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,

event logging and running user-defined script commands.

Offers simultaneous monitoring by up to 2 directly-connected devices through included USB and DB9 interface ports, or the monitoring by

any number of additional servers over IP with included PowerAlert monitoring software.

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,

DC battery voltage and remaining battery capacity

Emergency Power Off (EPO) interface with cable

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot

of connected devices

Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard

power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary

Specifications

OUTPUT

Output Volt Amp Capacity

(VA)

1500

Output kVA capacity (kVA) 1.5

Output Watt Capacity

(watts)

1000

Output kW capacity 1

Output power factor 0.7

Nominal Output Voltage(s)

Supported

230V

Nominal Voltage details 230v nominal inverter output voltage

Frequency compatibility 50 / 60 Hz

Output voltage regulation

(line mode)

-17%, +8%

Output voltage regulation

(Battery mode)

+/- 5%

Built-in UPS output

receptacles

8 C13 outlet(s)

Included output power

cables

Includes 2 C13 to C14 output power cables

Built-in controllable

switched load banks

Three switchable two-outlet C13 load banks

Output AC waveform (AC

mode)

Sine wave

Output AC waveform

(battery mode)

Pure Sine wave

INPUT

Rated input current (at

maximum load)

6.52A

Nominal Input Voltage(s)

Supported

230V AC

UPS input connection type C14 inlet

UPS input connection

description

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall

receptacles

Input circuit breaker 10A

BATTERY

Full load runtime (minutes) 7 min. (1000w)

Half load runtime

(minutes)

18 min. (500w)

Expandable battery

runtime

Extended runtime supported via optional external battery packs

External battery pack

compatibility

BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible)

DC system voltage (VDC) 36

Battery recharge rate

(included batteries)

Less than 4.5 hours from 10% to 90%

Replacement battery

cartridge (internal UPS

battery replacement)

RBC93-2U

Battery Access Front panel battery access door

Battery replacement

description

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage regulation

description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282

Overvoltage correction Input voltages between 245 and 282 are reduced by 12%

Undervoltage correction Input voltages between 181 and 199 are boosted by 12%

Severe undervoltage

correction

Input voltages between 151 and 180 are boosted by 24%

LEDS ALARMS & SWITCHES

LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Alarms Audible alarm indicates power-failure, overload and low-battery conditions

Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate

low-battery status

Switches 2 Switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression

joule rating

480

UPS AC suppression

response time

Instantaneous

EMI / RFI AC noise

suppression

Yes

PHYSICAL

Installation form factors

supported with included

accessories

4 post 19 inch rackmount (mounting rail kit included)

Installation form factors

supported with optional

accessories

2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND); 2-4 post front rail

rackmount (UPSHDEARKIT)

Primary form factor Rackmount

UPS / Power Module

dimensions in primary

form factor (height x width

x depth / inches)

3.5 x 17.5 x 13.5

UPS / Power Module

dimensions in primary

form factor (height x width

x depth / cm)

8.9 x 44.4 x 34.3

Installed whole system

dimensions in secondary

form factor (height x width

x depth / cm)

44.4 x 8.9 x 34.3

Rack Height 2U

Secondary form factor Tower (requires 2-9USTAND)

Installed whole system

dimensions in secondary

form factor (height x width

x depth / inches)

17.5 x 3.5 x 13.5

UPS dimensions in

secondary form factor

(height x width x depth /

cm)

44.4 x 8.9 x 34.3

UPS / Power Module

weight (lbs)

42.8

UPS / Power Module

weight (kg)

19.4

UPS Shipping dimensions

(height x width x depth /

inches)

9 x 24 x 20.5

UPS Shipping dimensions

(height x width x depth /

cm)

22.9 x 61 x 52.1

Shipping weight (lbs) 50.5

Shipping weight (kg) 22.9

Cooling method Fan

UPS housing material Steel

ENVIRONMENTAL

Operating Temperature

Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature

Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr. (full

load)

105.2

Battery mode BTU / hr.

(full load)

463.6

COMMUNICATIONS

Communications interface USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Network monitoring port

description

Supports detailed monitoring of UPS and site power conditions

PowerAlert software Included

Communications cable USB and DB9 cabling included

WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer time 2-4 milliseconds

Low voltage transfer to

battery power (setpoint)

151

High voltage transfer to

battery power (setpoint)

282

SPECIAL FEATURES

Grounding lug Back panel grounding lug

Cold Start (startup in

battery mode during a

power failure)

Cold-start operation supported

High availability UPS

features

Hot swappable batteries

Green & high efficiency

features

Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

CERTIFICATIONS

UPS Certifications CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Tested to IRAM (Argentina)

WARRANTY

Product Warranty Period

(International)

2-year limited warranty

Product Warranty Period

(Mexico)

2-year limited warranty

Product Warranty Period

(Puerto Rico)

2-year limited warranty

Related Items

Optional Products

Related Model Description Qty.

BP36V15-2U BP36V15-2U - External Battery Pack for UPS System 1

BP36V42-3U BP36V42-3U - External Battery Pack for UPS System 1

DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines 1

DNET1 Network Surge Suppressor - Essential protection for data and communication lines 1

DTEL2 Network Surge Suppressor - Essential protection for data and communication lines 1

ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD

or switched PDU.)

PDU12IEC Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical

networking equipment

SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1

U022-010 10-ft. USB2.0 A/B Gold Device Cable

(A Male to B Male)

WATCHDOGSW WatchDog Service Monitoring / Reboot Software 1

2-9USTAND Enables Tower Placement of Rackmount UPS Systems 1

2POSTRMKITWM Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems 1

MODBUSCARD For remote monitoring and control via MODBUS protocol 1

More information, including related products, owner's manuals, and additional technical specifications, can be found online at

www.tripplite.com/en/products/model.cfm?txtModelID=2687.

improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.

Autres manuels pour SmartPro Rackmount SMX1500XLRT2U

Table des matières

Autres manuels Tripp Lite UPS

Tripp Lite

Tripp Lite INTERNET350U Manuel utilisateur

Tripp Lite

Tripp Lite OMNI1000LCD Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro SMART700USB Guide de configuration

Tripp Lite

Tripp Lite SM750XLNAFTA Manuel utilisateur

Tripp Lite

Tripp Lite SMART2500XLHG Manuel utilisateur

Tripp Lite

Tripp Lite OMNISMART350HG Manuel utilisateur

Tripp Lite

Tripp Lite Audio/Video On-Line UPS System Manuel utilisateur

Tripp Lite

Tripp Lite OMNISMART1400HG Instructions d'installation et d'utilisation

Tripp Lite

Tripp Lite SmartOnline SU2200RTXL2UA Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro SMART1500RMXL2Ua Manuel utilisateur

Tripp Lite

Tripp Lite OmniSmart OMNISMART1400 Manuel utilisateur

Tripp Lite

Tripp Lite SMART1500CRMXL Manuel utilisateur

Tripp Lite

Tripp Lite OmniSmart UL2601-1 Manuel utilisateur

Tripp Lite

Tripp Lite TMU Series Manuel utilisateur

Tripp Lite

Tripp Lite TE Series Manuel utilisateur

Tripp Lite

Tripp Lite SmartOnline Manuel utilisateur

Tripp Lite

Tripp Lite SMART1000LCDTAA Manuel utilisateur

Tripp Lite

Tripp Lite OmniPro INT 300 Instructions d'installation et d'utilisation

Tripp Lite

Tripp Lite BCPERS450 Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro SMART750RMXL2U Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro SMART1050 Manuel utilisateur

Tripp Lite

Tripp Lite INTERNET OFFICE 350 Manuel utilisateur

Tripp Lite

Tripp Lite SmartOnline SU10KRT1X Manuel utilisateur

Tripp Lite

Tripp Lite 2POSTRMKITWM Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur