Tripp Lite OmniSmart OMNISMART1400 Manuel utilisateur

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: OMNISMART1400

OmniSmart 1400VA Tower Line-Interactive 120V UPS with USB port

Highlights

1400VA / 1.4kVA tower 120V line interactive UPS

Corrects brownouts and overvoltages from 75V to 147V

USB port, Front panel status LEDs

NEMA 5-15P input plug and 6 NEMA 5-15R outlets

Description

Tripp Lite's OMNI SMART 1400 line interactive UPS system offers voltage regulation, surge suppression and long lasting battery support for

personal computers, internetworking equipment and other sensitive electronics. Supports a single entry level PC system for up to 75 minutes during

power failures to facilitate a safe shutdown without data loss. Automatic Voltage Regulation (AVR) circuits regulate brownouts as low as 75 volts and

overvoltages to 147 volts back to normal 120V levels, all without using battery power. Includes 6 battery supported outlets and 6 foot AC line cord.

USB port enables optional safe unattended system shutdown in the case of extended power failure as well as continuous UPS and site power

condition monitoring, USB cable included. PowerAlert software available via free download from www.tripplite.com. Built-in audible alarm and 5 front

panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and overload. 1400VA/940 watt power handling

ability supports multiple entry-level PCs, network workstations, point-of-sale terminals, small to medium business phone systems, audio/video

workstations and heavily configured home theater systems. Offers 8 minutes battery runtime with a full load of 1400VA and 24 minutes with a half

load of 700VA. Supports hot swap battery replacement via built-in access panel. $200,000 connected equipment insurance (USA and Canada Only).

Package Includes

OMNI SMART 1400 UPS System

USB cable

Warranty information

Instruction manual

Features

OMNI SMART 1400 line interactive UPS system offers voltage regulation and battery support, plus complete AC and dialup/DSL modem

line surge suppression

Prevents equipment damage, data loss and downtime due to power problems

Supports a single entry level PC system for up to 75 minutes during power failures to enable a safe system shutdown

Supports a max load of 1400VA for 8 minutes

Supports a half load of 700VA for 24 minutes

Automatic Voltage Regulation (AVR) circuits correct brownouts as low as 75 and overvoltages as high as 147 volts back to normal 120 volt

levels without using battery power

Upright tower configuration uses only 66 square inches of floor or desktop space

Includes 6 battery supported outlets, 6 foot AC line cord (all NEMA 5-15)

USB port enables safe unattended shutdown without data loss during extended power failures, includes USB cable

USB port supports messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery

voltage and battery capacity

USB interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment

PowerAlert UPS monitoring software available via free download from www.tripplite.com

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting

completely locked computers by automatically switching UPS power off and back on again

Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and

overload status

1400VA/940 watt power handling ability supports multiple entry-level PCs, network workstations, point-of-sale terminals, small to medium

business phone systems, audio/video equipment stations and heavily configured home theater systems

Supports hot-swap battery replacement via built-in battery access panel

Compatible with 120V/60Hz applications for USA, Canada, Mexico and more

$200,000 connected equipment insurance (USA and Canada Only)

Specifications

OUTPUT

Output Volt Amp Capacity

(VA)

1400

Output kVA capacity (kVA) 1.4

Output Watt Capacity

(watts)

940

Nominal Output Voltage(s)

Supported

115V; 120V

Frequency compatibility 60 Hz

Output voltage regulation

(line mode)

-18%, +8%

Output voltage regulation

(Battery mode)

115V (+/- 5%)

Built-in UPS output

receptacles

6 5-15R outlet(s)

Basic PDU options PDU1215 (1U / 13 5-15R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDU1415 (0U / 14 5-15R outlets);

PDUV15 (0U / 12 5-15R outlets)

Metered PDU options PDUMH15 (1U / 13 5-15R outlets); PDUMH15AT (1U / 8 5-15R outlets)*; PDUMV15 (0U / 16 5-15R outlets)

Switched PDU options PDUMH15ATNET (1U / 8 5-15R outlets)*; PDUMV15NET (0U / 16 5-15R outlets)

External PDU redundancy

options

*Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS

models only

Output AC waveform (AC

mode)

Sine wave

Output AC waveform

(battery mode)

PWM sine wave

INPUT

Rated input current (at

maximum load)

9.2A

Nominal Input Voltage(s)

Supported

120V AC

UPS input connection type 5-15P

UPS Input cord length (ft.) 6

UPS Input cord length (m) 1.8

Recommended Electrical

Service

15A 120V

Input cord length (ft.) 6

Input cord length (m) 1.8

BATTERY

Full load runtime (minutes) 8 min. (940w)

Half load runtime

(minutes)

24 min. (470w)

DC system voltage (VDC) 36

Battery recharge rate

(included batteries)

Less than 8 hours from 10% to 90%

Replacement battery

cartridge (internal UPS

battery replacement)

RBC53

Battery Access Battery access door

VOLTAGE REGULATION

Voltage regulation

description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147

Overvoltage correction Input voltages between 128 and 147 are reduced by 12%

Undervoltage correction Input voltages between 93 and 107 are boosted by 14%

Severe undervoltage

correction

Input voltages between 75 and 92 are boosted by 30%

LEDS ALARMS & SWITCHES

LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Alarms Audible alarm indicates power-failure and low-battery conditions

Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate

low-battery status

Switches 2 Switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression

joule rating

480

UPS AC suppression

response time

Instantaneous

EMI / RFI AC noise

suppression

Yes

AC suppression joule

rating

480

AC suppression response

time

Instantaneous

PHYSICAL

Installation form factors

supported with included

accessories

Tower

Installation form factors

supported with optional

accessories

Wallmount (UPSWM - tower mounting kit)

Primary form factor Tower

UPS / Power Module

dimensions in primary

form factor (height x width

x depth / inches)

12.8 x 7.5 x 9.2

UPS / Power Module

dimensions in primary

form factor (height x width

x depth / cm)

32.4 x 19 x 23.5

UPS / Power Module

weight (lbs)

36.4

UPS / Power Module

weight (kg)

16.5

UPS Shipping dimensions

(height x width x depth /

inches)

18.2 x 12 x 13.8

UPS Shipping dimensions

(height x width x depth /

cm)

46.4 x 30.5 x 34.9

Shipping weight (lbs) 40

Shipping weight (kg) 18.2

UPS housing material PVC

ENVIRONMENTAL

Operating Temperature

Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature

Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr. (full

load)

204

Battery mode BTU / hr.

(full load)

277.9

COMMUNICATIONS

Communications interface USB

PowerAlert software Free download from www.tripplite.com

Communications cable USB cable included

WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer time 2-4 milliseconds

Low voltage transfer to

battery power (setpoint)

High voltage transfer to

battery power (setpoint)

147

SPECIAL FEATURES

Cold Start (startup in

battery mode during a

power failure)

Cold-start operation supported

Green & high efficiency

features

Greater than 95% efficiency - GREEN UPS

CERTIFICATIONS

UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B

(EMI)

WARRANTY

Product Warranty Period

(Worldwide)

2-year limited warranty

Connected Equipment

Insurance (U.S., Canada &

Puerto Rico)

$200,000 Ultimate Lifetime Insurance

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur