TPI 580 Manuel utilisateur

Title : Tpi580

1/5

Air Velocity Meter

Tpi580

User Guide

Title : Tpi580

2/5

1. Features

Hot wire / Vane Combo unit.

Smart probe : Interchangeable probe.

Probe hot wire/vane auto recognition.

CFM / CMM Measurement ( Volume calculate )

Backlight

Bluetooth LE / Apps for Android / iOS ( Model : Tpi580BT Only )

Auto power off ( 15 min )

2. Function and Accuracy

Function

Description

Hotwire Air

Range 0.2 m/s ~ 20 m/s

Resolution 0.01 m/s

Accuracy ±( 5% + 1digit ) or

±( 1% + 1digit ) F.S

Unit m/s, km/h, mph, fpm

Vane Air

Range 1 m/s ~ 25 m/s

Resolution 0.1 m/s

Accuracy

±( 2% + 3digit )

Unit m/s, km/h, mph, fpm

Temperature

Range -20 °C ~ 60 °C ( -4 °F ~ 140 °F )

Resolution 0.1 °C ( 0.1 °F)

Accuracy

± 0.5 °C ( 0 °C ~ 45 °C )

± 1 °C ( -20 °C ~ 0°C, 45°C ~ 60°C )

± 1 °F ( 32 °F ~ 113 °F )

± 2 °F ( -4 °F ~ 32°F, 113°F ~ 140°F )

Others

Airflow(volume)

calculate

CFM, CMM.

REC, HOLD MIN, MAX, AVG, Data HOLD

Operation

environment

-20 °C ~ 60 °C ( -4 °F ~ 140 °F ) at <75%RH

Communication Bluetooth LE ( Tpi580BT only )

Battery 4.5V ( AA size x 3)

Battery life time Hot air probe : about. 30h Vane air probe : about. 68h

Auto power off 15 min ( ifAPO is active )

Title : Tpi580

3/5

3. Key

: On / Off (Push it more than 2 sec.)

: Air Velocity unit ( m/s, km/h, fpm, mph, knots) , Volume unit ( CMM,CFM),

Temperature unit ( °C, °F ), Area unit ( in2, cm2, m2, ft2)

: Record mode ( Time record mode, Point record mode ), MAX , MIN , AVG

: Backlight On / Off ( Backlight Auto off 60 Sec. ) ** ( Tpi580BT Only = Bluetooth Model -

Bluetooth feature On / Off to push it more than 2 sec. )

: SET mode: Up feature. General mode: Data Hold

: SET mode: Down feature. General mode: Auto power On/Off enable / disable

General mode: Save the air velocity and air volume between 0 ~ 299.

: SET mode: Left feature

: SET mode: Right feature. General mode: Display the saved value between 0 ~ 299.

: SET mode: Feature setting (Enter).

General mode: Transfer from Air Velocity measurement to Volume (CMM,CFM) measurement.

Push it again and transfer to Air Velocity measurement.

** For key feature to work, hot wire probe or vane probe must be connected. Backlight and power Key always work.

4. LCD display

1: Air velocity and air volume display.

2: Enter the temperature and DUCT. Display time and Point when the Record feature started.

Auto Power Off feature on/off

Low Battery display

Bluetooth on – Blink. Bluetooth connect – Display continuously.

Title : Tpi580

4/5

CMM or CFM measurement – Display x1, x10, x100. 9999900 CMM, 9999900 CFM

Record

DUCT: Round DUCT setting. Record: Point Record setting.

Hot wire probe

Vane probe

5. Measurement

Power on to push the Power key for more than 2 sec. ( Display All Model#)

oPEn displays when the probe is not connected.

Only back light key and power key work in this condition.

Connect the Hot wire probe and display ‘H—d’.

Main screen: Inverse counting for 5 sec Hot wire warming up on Hot wire probe.

H -- d : Hotwire warming up Delay

Vane Probe connect Display the air velocity without delay.

Measure the air velocity.

6. UNIT setting

Push the UNIT key.

SET display. Display theAir velocity unit. Change the unit to push the UP, Down key.

Push the Right key when the right unit blinks. CMM, CFM blink next and change to push the Up, Down

key.

Push the Right key when the right unit blinks. The temperature unit blink next and change to push the

Up, Down key.

Push the Right key when the right unit blinks. The area unit blink next and change to push the Up, Dow

n key.

Push the Enter key and set the unit.

7. Record

Push the REC key.

SET display. Choose Point or Time to push the Up / Down key.

Choose Time , Point to push the Enter key.

Time: Push the Enter key and capture the measurement value at 1 sec interval.

(Start / Stop the capture with the Enter key.)

Point: Capture with each Enter key.

Record mode: MAX MIN AVG with REC key.

Record data is cleared when your push the Left key on Record Stop.

Transfer from Record mode to General measurement mode to push the REC key more than 2 sec.

Title : Tpi580

5/5

8. DUCT setting

Push the DUCT key.

Choose Free Area , Rectangle , Circular with the Up / Down key.

Set to push the Enter Key.

Choose the value with Up / Down , Left / Right key.

Set to push the Enter key.

** Push the Enter key on general air velocity measurement mode and it changes to air volume measurement.

Duct size max value

Unit cm : 9999

Unit m : 99.99

Unit ft : 99.99

Unit in : 999.9

** The max value is saved if the unit changed value is higher than max value.

9. Memory ( 0 ~ 299 )

Measure the air velocity and air volume on general mode or Record mode.

Push the MEM key.

- CaptureTpi580 and Memory mode displays. (Data save mode)

Choose the address with the arrow key ( left, right, up, down ).

Push the Enter key.

- Tpi580 saves the captured data to the selected address.

- End the Memory mode. Now it is measurement mode.

When you save the measurement value on Record mode, it can be saved on Stop and saves the average value.

* Memory All Clear *

Push the MEM key more than 2 sec on Memory mode and Clear starts.

When Clear is done, the display changes to general measurement mode.

* Escape / Cancel *

The work is done with the UNIT key on Memory mode and Recall mode and now it is general measurement mode.

** Memory mode is not working on “OPEN”.

** It can’t recall when you recall the address without saved data.

10. RECALL ( 0 ~ 299 )

Push the RCL key.

Choose the Recall address with the left, right, up, down key.

Push the Enter key.

Display the saved value.

- Recall: “HOLD” and “ REC” display.

- Velocity / Volume display with Enter key.

- You can check the Duct size and type with Bluetooth.

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur