TPI 608 Manuel utilisateur

Digital Manometer 608 & 608BT

TestProducts International, Inc.

The Value Leader

isit www.tpieurope.com

A. INTRODUCTION

1. Congratulations: Thank you for purchasing TP products. The 608(BT) is easy to

use and built to last. Please remember to complete product warranty registration on

our website at www.tpieurope.com.

2. Product Description: The 608(BT) digital manometer measures pressure or

vacuum in four units of measure. Please follow manufactures recommendations on

all equipment being serviced with the 608(BT).

B. AFETY CON IDERATION

1. Wear safety goggles.

2. Make sure system pressure does not exceed the capability of the 608(BT) before

connection.

3. Check all connections making sure they are secure with no leaks.

4. Observe all manufacturers recommendations.

C. General pecifications

ensor Type Temperature compensated solid state

Connector Type Standard 1/4” Barb Fitting

Range -150 mBar to + 150 mBar

Units of Measure PS , mBar, KPa, inH2O

Over Pressure +/- 300 mBar

Operating Temperature -10° to 50°C (14° to 122°F)

Power upply 9 Volt Alkaline

D. Accuracy

Measurement Range Resolution Accuracy

inH2O +/-(0.01 to 29.99) 0.01 +/- 0.3 inH2O

+/-(30.0 to 60.0) 0.1 +/- 0.6 inH20

mbar +/-(0.01 to 29.99) 0.01 +/- 0.3 mbar

+/-(30.0 to 150.0) 0.1 +/- 1.5 mbar

KPa +/-(0.001 to 2.999) 0.001 +/- 0.03 KPa

+/-(3.00 to 15.00) 0.01 +/- 0.15 KPa

PS +/-(0.001 to 2.175) 0.001 +/- 0.021 PS

E. MEA UREMENT TECHNIQUE

1. Turn the 608(BT) on by pressing the ON/OFF key. The display will initially read “608” along

with “APO” or “- - - -”, and the selected unit of measure. After this initial display the 608(BT*)

is ready for use.

*Please see pages 4 to 6 to connect Bluetooth version to the FREE TP View app. for

enhanced features.

APO = Auto Power Off enabled - the 608 will turn off after 20 minutes

- - - - = Auto Power Off disabled - the 608 will stay on until turned off

Follow these steps to change the unit of measure and to enable or disable auto power off as

required.

a) With the 608 turned off, press and hold the ON/OFF key until the display flashes “APO”

or “----” and the unit of measure annunciator.

b) Release the ON/OFF key and then press it repeatedly until the desired unit of measure is

displayed. The unit of measure aanunciators will cycle through mmH2O, mbar, KPa, PS ,

and inH2O each time the ON/OFF key is pressed.

c) Press the ZERO key to enable or disable auto power off. “APO” displayed indicates auto

power off is enabled, “- - - -” displayed indicates auto power off is disabled. Pressing the

ZERO key cycles between these two options.

d) Once the desired unit of measure and auto power off mode is selected, allow the 608 to

turn off and then turn it back on and proceed with testing. The 608 will turn on in the last

selected unit of measure and auto power off mode until changed.

2. Zero the displayed reading by pressing the ZERO button.

3. Connect the 608(BT) to the device under test.

Additional Features

Backlight - The backlight can be activated to make the display easier to see in

dark environments. Press the BL button to turn the backlight on. The

display will light up and “BL” will be displayed.To preserve battery

life, the backlight will remain on for 15 seconds and then turn off.

Case Magnets - The 608 back case is equipped with magnets and a hook.

and Hook This allows the 608 to be secured during tests.

F.ACCE ORIE

Item # Description

A009A............9 Volt Alkaline Battery (included)

A616 ..............Soft Carrying Pouch (optional)

A608BT..........Splashproof Protective Cover (optional) 2

G. MAINTENANCE

1. Clean the surface of the instrument using a damp cloth.

2. Replace the 9 Volt battery when the low battery indicator appears on the LCD.

H. TROUBLE HOOTING

ymptom Probable Cause

Display reads “oFL” Pressure over range

Low battery.

Damaged sensor.

608 does not turn on. Dead or low battery.

Defective POWER ON switch.

Broken battery connector.

I. WARRANTY

This product is warranted to the purchaser against defects in material and workmanship for three years from the date of

purchase.

Covered by Warranty: Repair parts and labor; or replacement of the product at company’s option. Normal transporta-

tion charges to the purchaser are also covered.

Not Covered by Warranty: Damages to the product which are the result of abuse, improper use or maintenance are

not covered. Any other expense, consequential damages, incidental damages, or incidental expenses including dam-

ages to property are not covered. Transportation expenses to the company are not covered.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or

exclusions may not apply to you.

To Obtain Warranty Performance: nclude with the product: your name, address, phone number, written description of

the problem and proof of purchase date. Carefully package and return to:

TPI, Inc. TPI, Ltd. TPI, Europe Ltd..

9615 W Allen Blvd. 342 Bronte Rd. ., Unit 9 Longley House, International Drive

Beaverton, OR 97005 Milton, Ontario L9T 5B7 Crawley, W. ussex. RH10 6AQ

U A Canada England

Implied Warranties: Any implied warranties including implied warranties of merchantability and fitness for a particular

purpose, are limited in duration to three years from date of purchase. To the extent any provision of this warranty is pro-

hibited by federal or state law and cannot be preempted, it shall not be applicable. This warranty gives you specific

legal rights, and you may also have other rights which vary from state to state.

608BT BLUETOOTH VER ION

1. Congratulations: Thank you for purchasing TP products. The 608BT

is easy to use and built to last. t is backed by a 3 year limited

warranty.

2. Product Description: The 608BT is a Single nput Manometer

Pressure “Smart Probe”. t connects to your mobile device and uses

the TP View App to display pressure readings & perform Let/By

Tightness Test.

Data can be displayed, saved, logged, allocated to a specific job &

e-mailed from within the TP View app once the 608BT is connected

to it.

3. Download the View app from either the Apple App Store or the

Google Play Store.

TPI View App

As simple as 1, 2, 3

1. Connect 2. Start Test 3. Create Report

Create JOBS

before you start

taking readings

Save to a JOB, Print

or E-mail or ALL 3 -

the choice is Yours!!

Give each report a

different

reference/name

Job Management allows you to create multiple

JOBS and attach multiple REPORTS to each JOB

Save to an

existing JOB or

create a NEW one

Perform various types of pressure tests such as,

Live Pressure, Fan Pressure, Working Pressure &

even FULL UK Let ByTightness Tests using the

FREE TPI View app.

The 608BT has been tested with the following standards and is in compliance with

the council RED directive 2014/53/EU: -

Test Products International Europe Ltd.

Longley House, International Drive

Southgate, Crawley, West Sussex RH10 6A

Tel:: +44 (0) 1293 530196

www.tpieurope.com

Thank You!!!!!

& Welcome to the TPI Family

We really appreciate you coming onboard, if you aren’t already,

and look forward to serving you over the next few years, and

beyond. For the best experience head over to

www.tpieurope.com,

create your account and register your product.

Benefits include:

Everything in one place•

Create service, calibration and warranty/repair requests•

Download certificates•

Contact sales, support and customer service•

Read correspondence from TPI including Service updates•

Manage your order history•

Shop Online for accompanying products and spares•

delivered direct to your door

Please do not hesitate to contact us by any of the following

methods:-

Tel: 01293 530196

E-mail: sales@tpieurope.com or service@tpieurope.com

Website: www.tpieurope.com inc. LI ECHAT

Facebook: @tpieurope

Twitter: @TPIEuropeLTD

Ce manuel convient aux modèles suivants

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur