SMART RTM-ATCA-F125 Guide de démarrage rapide

RTM-ATCA-F125

Installation and Use

P/N: 6806800K30H

January 2020

Trademarks

The stylized "S" and "SMART" is a registered trademark of SMART Modular Technologies, Inc. and “SMART Embedded

Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names

and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. These materials are

provided by SMART Embedded Computing as a service to its customers and may be used for informational purposes only.

Disclaimer*

SMART Embedded Computing (SMART EC) assumes no responsibility for errors or omissions in these materials. These

materials are provided "AS IS" without warranty of any kind, either expressed or implied, including but not limited to,

the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SMART EC further does

not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these

materials. SMART EC shall not be liable for any special, indirect, incidental, or consequential damages, including without

limitation, lost revenues or lost profits, which may result from the use of these materials. SMART EC may make changes to

these materials, or to the products described therein, at any time without notice. SMART EC makes no commitment to update

the information contained within these materials.

Electronic versions of this material may be read online, downloaded for personal use, or referenced in another document as a

URL to a SMART EC website. The text itself may not be published commercially in print or electronic form, edited, translated,

or otherwise altered without the permission of SMART EC.

It is possible that this publication may contain reference to or information about SMART EC products, programming, or services

that are not available in your country. Such references or information must not be construed to mean that SMART EC intends

to announce such SMART EC products, programming, or services in your country.

Limited and Restricted Rights Legend

If the documentation contained herein is supplied, directly or indirectly, to the U.S. Government, the following notice shall apply

unless otherwise agreed to in writing by SMART Embedded Computing.

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (b)(3) of the Rights in

Technical Data clause at DFARS 252.227-7013 (Nov. 1995) and of the Rights in Noncommercial Computer Software and

Documentation clause at DFARS 252.227-7014 (Jun. 1995).

SMART Embedded Computing, Inc.

2900 S. Diablo Way, Suite 190

Tempe, Arizona 85282

USA

*For full legal terms and conditions, visit www.smartembedded.com/ec/legal

Table of Contents

RTM-ATCA-F125 Installation and Use (6806800K30H) 3

About this Manual ................................................................9

Safety Notes....................................................................13

Sicherheitshinweise .............................................................17

1 Introduction.................................................................21

1.1 Features ...............................................................21

1.2 Standard Compliances ....................................................21

1.3 Mechanical Data .........................................................23

1.4 Ordering and Support Information ...........................................23

2 Hardware Preparation and Installation ...........................................25

2.1 Overview ...............................................................25

2.2 Unpacking and Inspecting the RTM .........................................25

2.3 Environmental and Power Requirements ......................................26

2.3.1 Environmental Requirements..........................................26

2.4 RTM Installation and Removal ..............................................28

2.4.1 Installing the RTM ..................................................28

2.4.2 Removing the RTM .................................................31

3 Controls, LEDs, and Connectors ...............................................33

3.1 Overview ...............................................................33

3.2 Face Plate Connectors and LEDs ...........................................33

3.2.1 LEDs ............................................................34

4 Functional Description........................................................35

4.1 Block Diagram ......................................................35

4.2 Management Resources ...................................................35

4.2.1 FRU Serial EEPROM................................................36

4.2.2 Temperature Sensors ...............................................36

4.2.3 LEDs ............................................................36

4.2.4 I2C Address Map ...................................................37

4.3 1Gbps SFP Ports ........................................................38

4 RTM-ATCA-F125 Installation and Use (6806800K30H)

Table of Contents

4.3.1 Connectivity .......................................................38

4.3.2 Front-Blade Port Mapping ............................................39

4.3.3 SFP Connection....................................................39

4.3.3.1 I2C Bus ..................................................40

4.3.3.2 SFP Status Signals .........................................40

4.3.3.3 SFP Control Signals .........................................40

4.4 10Gbps SFP+ Ports ......................................................40

4.4.1 Connectivity .......................................................40

4.4.2 Front-Blade Port Mapping ............................................41

4.4.3 BCM8747 Configuration Flash.........................................41

4.4.4 Transmitter Control .................................................41

4.4.5 BCM8747 Status ...................................................41

4.4.6 SFP+ Connection...................................................42

4.4.6.1 I2C Bus ..................................................42

4.4.6.2 SFP+ Status Signals ........................................42

4.4.6.3 SFP Control Signals .........................................42

4.5 GPS Connectors .........................................................43

4.6 FPGA .................................................................43

4.6.1 Front-blade Interface ................................................43

4.6.2 SFP/SFP+ Control and Status .........................................43

4.6.3 BCM8747 Control and Status .........................................44

4.6.4 SFP I2C Interface...................................................44

4.6.5 Reset Handling.....................................................44

4.6.6 BCM8747 SPI Flash.................................................44

4.6.7 FPGA Register Map.................................................45

4.6.8 FPGA Configuration.................................................45

4.7 Reset Scheme ..........................................................45

4.8 Power Management ......................................................45

4.8.1 Power-good Indication ...............................................46

4.8.2 Power Requirements ................................................46

A Related Documentation .......................................................47

A.1 SMART Embedded Computing Documentation .................................47

List of Figures

RTM-ATCA-F125 Installation and Use (6806800K30H) 5

Figure 3-1 Face Plate .......................................................33

Figure 4-1 Block Diagram ....................................................35

Figure 4-2 1GB Base Channel Interconnect ...................................... 38

Figure 4-3 Fabric 10 GB Interconnect ...........................................40

List of Figures

6 RTM-ATCA-F125 Installation and Use (6806800K30H)

List of Tables

RTM-ATCA-F125 Installation and Use (6806800K30H) 7

Table 1-1 Standard Compliances ................................................21

Table 1-2 RTM-ATCA-F125 Mechanical Data .......................................23

Table 2-1 Environmental Conditions ..............................................27

Table 4-1 Temperature Sensor Thresholds .........................................36

Table 4-2 PCF 8574 Port Usage .................................................37

Table 4-3 I2C Bus Address Map .................................................37

Table 4-4 Front-Blade Port Mapping ..............................................39

Table 4-5 SFP Connector Pin Assignment .........................................39

Table 4-6 10Gbps SFP+ Front-Board Mapping .....................................41

Table 4-7 SFP+ Connector Pin Assignment ........................................42

Table 4-8 FPGA Configuration Controls ...........................................45

Table 4-9 Power Requirements ..................................................46

Table A-1 SMART EC Documentation ............................................47

List of Tables

8 RTM-ATCA-F125 Installation and Use (6806800K30H)

RTM-ATCA-F125 Installation and Use (6806800K30H) 9

About this Manual

Overview of Contents

This manual is divided into the following chapters and appendices.

Chapter 1, Introduction on page 21 describes the main features of the RTM.

Chapter 2, Hardware Preparation and Installation on page 25 installation prerequisites and

the installation itself.

Chapter 3, Controls, LEDs, and Connectors on page 33 describes external interfaces such

as connectors and LEDs.

Chapter 4, Functional Description on page 35 contains a block diagram of the RTM and

provides some information on the IPMI functionality of the RTM.

Appendix A, Related Documentation on page 47 lists SMART EC user manuals that are

related to the RTM and the ATCA-F125.

Abbreviations

This document uses the following abbreviations:

Abbreviation Definition

AMC Alarm Management Controller

ARP Address Resolution Protocol

ATCA Advanced Telecom Computing Architecture

BIX Base Interface Switch

CP-TA Communications Platforms Trade Association

FIX Fabric Interface Switch

IO Input/Output

PICMG PCI Industrial Computer Manufacturers Group

PCI Peripheral Component Interconnect

RTM Rear Transition Module

SPI Serial Peripheral Interface

10 RTM-ATCA-F125 Installation and Use (6806800K30H)

About this Manua

About this Manual

Conventions

The following table describes the conventions used throughout this manual.

Notation Description

0x00000000 Typical notation for hexadecimal numbers (digits are 0 through F), for

example used for addresses and offsets

0b0000 Same for binary numbers (digits are 0 and 1)

bold Used to emphasize a word

Screen Used for on-screen output and code related elements or commands.

Sample of Programming used in a table (9pt)

Courier + Bold Used to characterize user input and to separate it from system output

Reference Used for references and for table and figure descriptions

File > Exit Notation for selecting a submenu

<text> Notation for variables and keys

[text] Notation for software buttons to click on the screen and parameter

description

... Repeated item for example node 1, node 2, ..., node 12

Omission of information from example/command that is not necessary at

the time

.. Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used

in registers)

| Logical OR

Indicates a hazardous situation which, if not avoided, could result in death

or serious injury

Indicates a hazardous situation which, if not avoided, may result in minor

or moderate injury

Autres manuels pour RTM-ATCA-F125

Table des matières

Autres manuels SMART Tableau blanc interactif

SMART

SMART Sympodium ID250 TM Manuel utilisateur

SMART

SMART Board 600 Series Manuel utilisateur

SMART

SMART Board 800ix2 Manuel utilisateur

SMART

SMART Table 230i Manuel d'installation

SMART

SMART board 8000i-G4 series Manuel d'utilisation

SMART

SMART M600i6 Manuel utilisateur

SMART

SMART Board 600i3 Manuel utilisateur

SMART

SMART Inforce 67X1 Manuel utilisateur

SMART

SMART FS640 Manuel utilisateur

SMART

SMART Board 800 Series Manuel utilisateur

SMART

SMART Board 600i3 Manuel utilisateur

SMART

SMART SMART Board 885-SMP Manuel utilisateur

SMART

SMART Room System SRS-LYNC-XS Manuel de service

SMART

SMART SB880i5 Manuel utilisateur

SMART

SMART SmartBoard 600i2 Manuel utilisateur

SMART

SMART Smart Board M600 series Manuel utilisateur

SMART

SMART Board 8055ie-SMP Manuel utilisateur

SMART

SMART KAPP IQ Guide d'installation

SMART

SMART SBX880 Manuel utilisateur

SMART

SMART kapp iQ 55 Manuel utilisateur

SMART

SMART Podium 500 Series Manuel utilisateur

SMART

SMART kapp iQ 55 Manuel utilisateur

SMART

SMART SBID 8000 series Manuel utilisateur

SMART

SMART Podium ID422w Manuel utilisateur

Manuels Tableau blanc interactif populaires d'autres marques

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Manuel utilisateur

Buhl

Buhl LyteBoard Manuel utilisateur

SMART Board

SMART Board 680 Manuel utilisateur

Legamaster

Legamaster e-SCREEN ETX Manuel utilisateur

SMART Board

SMART Board SBM685ix2 Manuel utilisateur

Seneca

Seneca eno Manuel utilisateur

BenQ

BenQ RP840G Manuel utilisateur

Olivetti

Olivetti OLIBOARD Manuel utilisateur

Turning Technologies

Turning Technologies MOBIVIEW Manuel utilisateur

Panasonic

Panasonic UB-5335 Manuel utilisateur

Dukane

Dukane ITP84 Manuel utilisateur

Bretford

Bretford EDUIMS Guide de configuration

Panasonic

Panasonic Panaboard UB-5315 Manuel utilisateur

Plus

Plus M-11S Manuel utilisateur

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Manuel utilisateur

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Manuel utilisateur

AVer

AVer CP series Manuel utilisateur

Genee

Genee 56" Manuel utilisateur