SMART 8070i Manuel utilisateur

SMART Board™ 8070i

Interactive Display

Installation Guide

Trade-mark Notice

SMART Board, SMART Notebook, SMART Meeting Pro, smarttech and the SMART logo are trade-marks of SMART

Technologies ULC in the US and/or other countries. HDMI is a trade-mark or registered trade-mark of HDMI Licensing LLC.

All other third-party product and company names may be the trade-marks of their respective owners.

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the US Federal Communications Commission Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions,

may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.

Patent list

US5448263; US6141000; US6320597; US6326954; US6337681; US6421042; US6563491; US6674424; US6741267;

US6747636; US6760009; US6803906; US6829372; US6919880; US6947032; US6954197; US6972401; US7151533;

US7184030; US7236162; US7289113; US7342574; US7379622; US7411575; US7499033; US7532206; US7619617;

US7626577; US7643006; US7692625; CA2058219; CA2252302; CA2386094; CA2453873; EP1297488; EP1739528;

ES2279823; JP4033582; JP4052498; JP4057200; ZL0181236.0; DE60124549; Other patents pending.

transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior

written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does

not represent a commitment on the part of SMART.

02/2011

Contents
Installing your interactive display 1
Components of your interactive display 1
Wall-mounting your interactive display 2
Installing the interactive display speakers 5
Cabling instructions for the interactive display 5
Connecting to power and to your room computer 6
Installing a guest laptop connection 7
Connecting external equipment to the bottom terminal panel 9
Turning on and turning off your interactive display 11
Installing SMART software 11
Hardware environmental compliance 15
Waste Electrical and Electronic Equipment regulations (WEEE directive) 15
Restriction of Certain Hazardous Substances (RoHS directive) 15
Batteries 15
Packaging 16
Covered electronic devices 16
China’s Electronic Information Products regulations 16
USConsumer Product Safety Improvement Act 16
California Air Resources Board – Airborne Toxic Control Measure 16
Restriction of Certain Chemicals (REACH directive) 17
Customer support 19
Online information and support 19
Training 19
Technical support 19
Dispatch and repair status 19
General inquiries 20
Warranty 20
Registration 20
i

Installing your interactive

display

Components of your interactive display

The following images identify the components of your interactive display.

Front view

Back view

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

Wall-mounting your interactive display

Use a team of trained, professional installers equipped with a lifting device to install your

interactive display.

W W A R N I N G

lImproper installation can result in personal injury or product damage.

lYour interactive display weighs 119 kg (262 lb.). Refer to local building regulations to

ensure that your installation area can support this weight.

C C A U T I O N

Do not allow the weight of your interactive display to rest on the colour select module or the

bottom bezel because they are not designed to support product weight. Attach other

components whilst your interactive display is either still in its packaging or suspended from a

lifting device to prevent the weight of your interactive display from damaging the colour select

module.

I I M P OR T A N T

Save all product packaging so that it is available if you need to transport your interactive

display. If your original packaging is not available, you can purchase new product packaging

from your authorised SMART reseller.

Important mounting considerations for trained installers

Consider the following when mounting your interactive display on a wall:

lPlan your workflow to include cabling because some cable attachment points might not be

accessible post-installation.

I I M P OR T A N T

Speakers must be attached and speaker wires connected to your interactive display

before it is wall-mounted.

lTo wall-mount this interactive display, you require a standard VESA®400 mm × 400 mm

mounting plate, not included.

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

lAttach the M12 eyebolts and washers included to assist in mounting.

W W A R N I N G

oIn order to aid in mounting or carrying, a lifting device must be used in conjunction

with the M12 attachable eyebolts. Do not attempt to mount or carry the display

using your own strength because the display may fall and cause personal injury.

oUse VESA-approved mounting hardware. Remove the M12 eyebolts after

installation.

lInspect the installation location to ensure that it can support the weight of your interactive

display.

lUse M8 screws to fasten the wall bracket. The length of the screws must be 14-15 mm

plus the thickness of the bracket and the washer. If using screws longer than 14-15 mm,

ensure sufficient depth.

lRecommended fasten force is 1125-1375 N·cm

lRefer to the instructions included with the mounting equipment for more detailed

information.

Selecting the mounting location

Consider the following when you select a location for your interactive display:

lThe wall must be strong enough to support your interactive display and the mounting

accessories. Your interactive display weighs 119 kg (262lb.).

lDo not install your interactive display in a location where a door or gate can hit it.

lDo not install your interactive display in an area where it will be subjected to strong

vibrations or dust.

lDo not install your interactive display near where the main power supply enters the

building.

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

lDo not install your interactive display where people can easily grab and hang onto it or the

mounting apparatus.

lEnsure adequate ventilation or provide air conditioning around your interactive display so

that heat can flow away from the unit and mounting apparatus.

lWhen mounting your interactive display in a recessed area, such as in a wall, leave at least

10 cm (4") of space between your interactive display and the recess walls to ensure proper

ventilation.

Choosing the mounting height for your interactive display

Consider the heights of your users when choosing the mounting height for your interactive

display.

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

Installing the interactive display speakers

Your interactive display comes with two 15 W speakers.

I I M P OR T A N T

Install the speakers on your interactive display before installing the interactive display on the

wall. Install the speakers whilst the interactive display is either still in its product packaging or

suspended from a lifting device.

Audio connection diagram

gTo connect the speakers

1. Attach the supplied speakers to the side of the interactive display with the included

screws.

2. Connect the speaker wires to the speaker connectors found on the right-hand side of the

back of your interactive display.

Cabling instructions for the interactive display

Your interactive display must be connected to a computer and a power source. The installed

computer connections consist of:

lA room computer connected to both the USB #1 and the VGA connector. This is the default

computer for the interactive display.

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

lA guest laptop cable bundle connected to the USB #2 and RGB/HV connectors. The

cabling can be installed running to a remote location, such as a conference table. This

cabling is optional.

A wire bundle of these two connectors is not included with your interactive display, but is

available from your authorised SMART reseller. Refer to the interactive display

specifications document for ordering information.

You can switch inputs between your room computer and the guest laptop connection with the

input button in the front control panel or with the input button on the infrared remote control.

Connecting to power and to your room

computer

Your room computer is the default computer for your interactive display. Connect a VGA cable

and a USB cable from this computer to the VGA connector and USB #1 connector on your

interactive display.

Room computer connection diagram

gTo connect your interactive display to power and to your room computer

1. Connect the VGA cable included from your computer to the VGA connector on the terminal

panel.

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

Autres manuels pour 8070i

Table des matières

Autres manuels SMART Tableau blanc interactif

SMART

SMART UF45-680 Manuel utilisateur

SMART

SMART 880i5-SMP Manuel utilisateur

SMART

SMART Board 600 Series Manuel utilisateur

SMART

SMART SmartBoard 600 Series Manuel utilisateur

SMART

SMART Board 8055ie-SMP Manuel utilisateur

SMART

SMART Inforce 67X1 Manuel utilisateur

SMART

SMART Board 600 Series Mode d'emploi

SMART

SMART SMART Board Manuel utilisateur

SMART

SMART kapp iQ 55 Manuel utilisateur

SMART

SMART SBID 8084i-G4 Manuel utilisateur

SMART

SMART KAPP IQ Manuel utilisateur

SMART

SMART SBM600i6 Manuel utilisateur

SMART

SMART 685ix2 Manuel utilisateur

SMART

SMART SBID 8070i-G4 Manuel utilisateur

SMART

SMART Board 685ix Manuel utilisateur

SMART

SMART 600i Manuel utilisateur

SMART

SMART SBX880 Manuel utilisateur

SMART

SMART Podium ID422w Manuel utilisateur

SMART

SMART SBID 8000 series Manuel utilisateur

SMART

SMART kapp iQ 55 Manuel utilisateur

SMART

SMART SBID8055i-G5-SMP Manuel de service

SMART

SMART Board 885ix2-NCP Manuel utilisateur

SMART

SMART SB880i5 Manuel utilisateur

SMART

SMART SPNL-6065 Manuel utilisateur

Manuels Tableau blanc interactif populaires d'autres marques

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Manuel utilisateur

Buhl

Buhl LyteBoard Manuel utilisateur

SMART Board

SMART Board 680 Manuel utilisateur

Legamaster

Legamaster e-SCREEN ETX Manuel utilisateur

SMART Board

SMART Board SBM685ix2 Manuel utilisateur

Seneca

Seneca eno Manuel utilisateur

BenQ

BenQ RP840G Manuel utilisateur

Olivetti

Olivetti OLIBOARD Manuel utilisateur

Turning Technologies

Turning Technologies MOBIVIEW Manuel utilisateur

Panasonic

Panasonic UB-5335 Manuel utilisateur

Dukane

Dukane ITP84 Manuel utilisateur

Bretford

Bretford EDUIMS Guide de configuration

Panasonic

Panasonic Panaboard UB-5315 Manuel utilisateur

Plus

Plus M-11S Manuel utilisateur

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Manuel utilisateur

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Manuel utilisateur

AVer

AVer CP series Manuel utilisateur

Genee

Genee 56" Manuel utilisateur