Quantum StorNext M330 Instructions d'installation

Hardware Guide

StorNext M330

Metadata Appliance

6-67638-01 Rev C

Quantum StorNext M330 Metadata Appliance Hardware Guide 6-67638-01 Rev C, July 2014.

Product of USA.

Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not

limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this

publication from time to time without notice.

Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written authorization of

Quantum Corporation is prohibited by law and constitutes a punishable violation of the law.

TRADEMARK STATEMENT

Quantum, the Quantum Logo, Backup. Recovery. Archive. It's What We Do., Be Certain, Be Quantum Certain, DLT, the DLT Logo,

DLTSage, DLTtape, the DLTtape Logo, DXi, DXi Accent, Dynamic Powerdown, FastSense, FlexLink, GoProtect, GoVault, iLayer,

Lattus, MediaShield, Optyon, Pocket-sized., Well-armored., Preserving the World's Most Important Data. Yours., Q-Cloud,

Quantum Certain, Quantum Certainty, Quantum vmPRO, Scalar, SDLT, SiteCare, SmartVerify, StorageCare, StorNext, Super

DLTtape, SuperLoader, and Vision are either registered trademarks or trademarks of Quantum Corporation and its affiliates in the

United States and/or other countries. All other trademarks are the property of their respective owners.

Products mentioned herein are for identification purposes only and may be registered trademarks or trademarks of their

respective companies. All other brand names or trademarks are the property of their respective owners.

Quantum specifications are subject to change.

StorNext M330 Metadata Appliance Hardware Guide iii

Contents

Chapter 1 Introduction 1

About the StorNext M330 Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . 1

About the StorNext M330 Metadata Appliance . . . . . . . . . . . . 1

About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Hardware Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Network Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Base System and Expansion Description . . . . . . . . . . . . . . . . . 2

StorNext M330 Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Purpose of This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

How This Guide is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Notes, Cautions, and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . 3

Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 2 Hardware Overview 9

StorNext M330 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

StorNext M330 MDC Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . 10

StorNext M330 Metadata Array . . . . . . . . . . . . . . . . . . . . . . . 17

StorNext M330 Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

StorNext M330 Power Cabling . . . . . . . . . . . . . . . . . . . . . . . . 24

StorNext M330 SAS Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Contents

iv StorNext M330 Metadata Appliance Hardware Guide

StorNext M330 LAN Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 26

StorNext M330 SAN Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Relocating the StorNext M330 System . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 3 Basic System Operations 31

Powering On All StorNext M330 System Components. . . . . . . . . . . . . 32

Shutting Down All StorNext M330 System Components . . . . . . . . . . . 33

Powering On a Single MDC Node of the StorNext M330. . . . . . . . . . . 35

Shutting Down a Single MDC Node of the StorNext M330 . . . . . . . . . 35

System Serial Numbers and Service Tag. . . . . . . . . . . . . . . . . . . . . . . . 37

Locating the System Serial Number . . . . . . . . . . . . . . . . . . . . 37

Serial Number Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Locating the Service

Tag Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Before Upgrading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

TSM Indexing Delay for Large Databases . . . . . . . . . . . . . . . . 38

Running the Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Upgrading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Upgrade Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Obtain the Firmware Upgrade Files. . . . . . . . . . . . . . . . . . . . . 40

Upgrade Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Deleting Uploaded Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Converting to HA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

HA Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Additional Common Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Changing the MDC VIP Address . . . . . . . . . . . . . . . . . . . . . . . 50

StorNext Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Chapter 4 Contacting Quantum 53

Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

StorNext M330 Metadata Appliance Hardware Guide 1

Chapter 1

Introduction

About the StorNext M330 Hardware

About the StorNext

M330 Metadata

Appliance

The StorNext M330 Metadata Appliance offers the powerful file-sharing

capabilities of StorNext in an optimized appliance package. The

StorNext M330 comes with a pair of metadata controller (MDCs) nodes

in a High Availability (HA) configuration and a high-performance

metadata array..

.MDCs coordinate SAN file access across clients. Additionally, the

standby node can be used as a distributed data mover (DDM) host using

the included license.

During installation, the StorNext M330 is configured for use in StorNext

environments operating as a StorNext Metadata Controller (MDC) High

Availability (HA) pair with access to both disk and tape libraries.

Chapter 1: Introduction

About the StorNext M330 Hardware

2 StorNext M330 Metadata Appliance Hardware Guide

About this document This document describes how to maintain the StorNext M330 after

initial installation and configuration .

Hardware Specification Each StorNext M330 MDC node contains the following:

• Two redundant, hot-swappable system hard drives in a RAID 1

configuration

• Redundant cooling fans and power

Network Connectivity Here are the quantity and type of network ports available on the

different system models:

• The StorNext M330 features one 2-port 8 Gb FC card for SAN

network connectivity.

• The StorNext M330 features three configurable 1 GbE Ethernet

ports per node.

MDCs coordinate SAN file access across SAN clients. Additionally, the

standby node can be used as a distributed data mover (DDM) host.

Base System and

Expansion Description

The StorNext M330 comes configured as a Base System with two

Metadata Controller (MDC) nodes which share a common file system

located on a single metadata array for storage.

StorNext M330

Documents

A complete list of documentation for the StorNext M330 Metadata

Appliance is located on the following web page:

http://www.quantum.com/snmdcdocs

Chapter 1: Introduction

Purpose of This Guide

StorNext M330 Metadata Appliance Hardware Guide 3

Purpose of This Guide

This guide describes how to identify and operate the key features of the

hardware components of the StorNext M330.

How This Guide is

Organized

This guide contains the following chapters:

•Chapter 1, Introduction provides an overview of this StorNext M330

Hardware Guide, and also includes document conventions, product

safety statements, a list of related documents, and supported

Internet browsers.

•Chapter 2, Hardware Overview provides an overview of the StorNext

M330 system.

•Chapter 3, Basic System Operations provides basic operating

instructions for the StorNext M330 system.

•Chapter 4, Contacting Quantum- provides information on

contacting Quantum support.

Notes, Cautions, and

Warnings

The following describes important information about Notes, Cautions,

and Warnings used throughout this guide.

Note

Note: Emphasizes important information related to the main topic.

Consequences if not followed:

There are no hazardous or damaging consequences.

Caution

Caution: Indicates potential hazards to equipment or data.

Chapter 1: Introduction

Purpose of This Guide

4 StorNext M330 Metadata Appliance Hardware Guide

Consequences if not followed:

Failure to take or avoid this action could result in loss of data or

harm to equipment.

Warning

WARNING: Indicates potential hazards to personal safety.

Consequences if not followed:

Failure to take or avoid this action could result in physical harm to

the user or hardware.

Document Conventions This guide uses the following document conventions to help you

recognize different types of information.

When a step includes substantial supporting information, the following

document conventions are used to differentiate the supporting

information from the procedural content:

Hardware Conventions

Conventions

Right side of the system — Refers to the right side as you face the

component being described.

Left side of the system — Refers to the left side as you face the

component being described.

Chapter 1: Introduction

Purpose of This Guide

StorNext M330 Metadata Appliance Hardware Guide 5

Software Conventions

Conventions Examples

For all UNIX-based

commands, the #prompt is

implied, although it is not

shown.

TSM_control stop

is the same as

# TSM_control stop

For all UNIX-based

commands, words in

italic

are variables and should be

replaced with user-defined

values.

cvaffinity

filename

where

filename

is a variable

and should be replaced with

a user-defined value.

User input is shown in bold

font.

./install.stornext

Computer output and

command line examples are

shown in monospace font.

./install.stornext

User input variables are

enclosed in angle brackets.

http://<ip_address>/cgi-

bin/stats

For UNIX and Linux

commands, the command

prompt is implied.

TSM_control stop

is the same as

# TSM_control stop

File and directory names,

menu commands, button

names, and window names

are shown in bold font.

/data/upload

Menu names separated by

arrows indicate a sequence

of menus to be navigated.

Utilities > Firmware

Chapter 1: Introduction

Product Safety Statements

6 StorNext M330 Metadata Appliance Hardware Guide

Product Safety Statements

Quantum will not be held liable for damage arising from unauthorized

use of the product. The user assumes all risk in this aspect.

This unit is engineered and manufactured to meet all safety and

regulatory requirements. Be aware that improper use may result in

bodily injury, damage to the equipment, or interference with other

equipment.

WARNING: Before operating this product, read all instructions and

warnings in this document and in the system, safety, and

regulatory guide.

Autres manuels pour StorNext M330

Table des matières

Autres manuels Quantum Stockage

Quantum

Quantum RDX 8000 Manuel utilisateur

Quantum

Quantum DXi4700 Manuel d'installation et d'exploitation

Quantum

Quantum PX500 Series Guide de démarrage rapide

Quantum

Quantum Scalar 100 Manuel utilisateur

Quantum

Quantum DLTtape DLT 4000 Manuel utilisateur

Quantum

Quantum StorNext QM1200 Manuel utilisateur

Quantum

Quantum PX720 Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum DXi6900 Manuel utilisateur

Quantum

Quantum Bigfoot 1.2AT Manuel utilisateur

Quantum

Quantum Maxtor Fireball CR Manuel utilisateur

Quantum

Quantum ValueLoader DLT VS80 Mode d'emploi

Quantum

Quantum Scalar i6 Manuel utilisateur

Quantum

Quantum ValueLoader DLT VS160 Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum Scalar i2000 Manuel utilisateur

Quantum

Quantum DLT-S4 Manuel utilisateur

Quantum

Quantum FastStor 1 Manuel utilisateur

Quantum

Quantum LTO3 A-Series Manuel utilisateur

Quantum

Quantum SNC 4500 Mode d’emploi

Quantum

Quantum Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB Manuel utilisateur

Quantum

Quantum ActiveScale P100E3 Manuel utilisateur

Quantum

Quantum Q2000 Manuel utilisateur

Quantum

Quantum StorNext QD6000 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur