Quantum Scalar 1000 Mode d’emploi
Release Notes
6-00017-26 Rev A
© December 2006, ADIC®
ADIC and Scalar are registered trademarks of Advanced Digital Information Corporation. All
other product, company, or service names mentioned herein are the property of their respec-
tive owners.
Product: Scalar®1000 641A.00003
Date: December 2006
Contents
Purpose of this Release
This Scalar 1000 641 firmware release adds one new enhancement that extend the capabilities of the
Scalar 1000 Library. This document describes the new enhancement, as well as corrections made to issues
encountered in previous releases of the library. Visit www.adic.com for additional information about
Scalar 1000 641 Firmware and previous releases.
New Enhancement
The following enhancement is in this release of the Scalar 1000:
• Improved label scanning during teaching
Previously, teach values could vary as much as 2mm between teaches, which could generate SAC
7C errors.
To improve scanning accuracy and reduce variance errors, labels are now scanned at least twice.
If the X or Y value exceeds 0.5mm, either X, Y, or both are scanned again. After scanning, the
largest X value and smallest Y value are passed to the teach function to calculate cell positions.
Also, to help eliminate SAC 7B errors that occurred during teach mastering, the reach motor
extends 1mm farther while extending to the teach master bracket.
Finally, to alert users when a scanner might need replacing, during the teach a warning message
appears on the operator panel when the scan beam is not level or is jittery.
Page Topic
1 Purpose of this Release
1 New Enhancement
2 Compatibility Matrix
3 Resolved Issues
4 Known Issues
4 Documentation
2© December 2006, ADIC
Compatibility Matrix
Refer to Table 1 for information on drive and auxiliary firmware compatibility with Scalar 1000 641 firmware.
Table 1 Drive and Auxiliary Firmware Compatibility Matrix
Component Firmware Version
RMU 161A.00005, 186A.00007, and 210A.00002
SNCs
SNC 3000 3.43.18
SNC 5100 4.45.10, 4.45.15, and 4.45.16
Scalar DLC 2.6
Drive Types
LTO-1 53J1, 36UC and 4561
LTO-2 53Y2, 42D1 and 4AP0
AIT-1 04E5
AIT-2 0200_CY10
AIT-3 0209_0001
3590-B1A D0IA_572
3590-E1A D0IF_26E
DLT-4000 V151
DLT-7000 V107
DLT-8000 V80
SDLT 220 V82
SDLT 320 V82
© December 2006, ADIC 3
Resolved Issues
Problems resolved in this release of Scalar 1000 641 Firmware are as follows:
Change
Request
Number
Description
25122 SAC 93 errors sometimes occurred on drives while reinitializing the library. To help eliminate
these errors, there is now a 5 second waiting period for IBM LTO drives. If an ACK is not
returned for the drive, there are two retries, resulting in a 15-second total time out. In the
event of a failure, during higher level functions the drive communications error is reported
without additional waiting.
30224 Corrects a condition in which the operator panel and Log_Sense reported the drive’s
firmware level incorrectly because a string variable was not initialized correctly.
30986 Corrects a condition that occurred when printing the log information in the 630 logs, in which
the retract retries was incorrect for previous versions.
33963 Media settings are now preserved during a firmware upgrade. (When upgrading from 630 to
640 firmware, if the media mode was set to extended it was reset to default mode after the
upgrade.)
36097 Corrects a condition in autocleaning immediate mode in which an expired AIT cleaning tape
resulted in move failure.The library now recognizes an expired AIT cleaning cartridge and
marks it expired in the database. Additional functionality has been added to force a cleaning
event on AIT 3 drives when necessary.
37030 Corrects a condition that caused a SAC 7A Reach Homing Error.
38272 Current scan velocity and cleaning cartridge information is now included in the library log.
38796 Corrects a condition that prevented toggling element addressing between old and new
styles for ADSM.
39285 The library log no longer fills with meaningless errors when the library has no RMU installed.
Only one message is generated when no RMU is installed.
39948 Corrects a condition for AIT and SDLT drives that caused SAC 7C errors due to drive
recovery functionality implemented in the 640 code.
40727 Total wait time for AIT drives is increased to 15 seconds to reduce the occurrence of SAC 93
errors. Initial wait time is now 5 seconds. If there is no response, the entire command
sequence is retried two more times, providing 15 seconds total time before reporting a drive
communication failure.
42786 Systems with LTO drives now have a longer wait time to ensure that the power-on self test
(POST) completes. This longer wait time eliminates SAC 96 errors that occurred on some
libraries when auto inventory was turned off, which resulted in shorter wait times that
prevented the POST from completing.
42795 Corrects a condition in which the SDLT get profile was incorrect, which caused SAC 7C
errors.
4© December 2006, ADIC
Known Issues
Due to a safety mechanism in the system, if you revert to a previous firmware version (for example, from
641 to 630,) the library resets the entire database to use the default values. This safety feature protects the
library against incompatibilities that might be caused by using database values from a higher firmware
version when reverting to a lower firmware version.
Documentation
The following documents are currently available for the Scalar 1000:
Document Number Document Title
6-01150-01 Scalar 1000 Planning Guide
6-00054-03 Scalar 1000 Operator Guide
6-00055-02 Scalar 1000 SCSI Reference Manual
Autres manuels pour Scalar 1000
2
Table des matières
Autres manuels Quantum Stockage
Quantum
Quantum ACL 4/52 Manuel
Quantum
Quantum DLT-V4 Manuel utilisateur
Quantum
Quantum DXi4701 Manuel utilisateur
Quantum
Quantum ValueLoader DLT VS80 Manuel utilisateur
Quantum
Quantum P7000 Series Manuel utilisateur
Quantum
Quantum DLTtape DLT 8000 Manuel utilisateur
Quantum
Quantum QXS 12G Series Manuel technique
Quantum
Quantum P4000 Series Manuel utilisateur
Quantum
Quantum ValueLoader LTO-2 Manuel utilisateur
Quantum
Quantum ATL PowerStor L200 Series Manuel utilisateur
Quantum
Quantum Atlas III Mode d’emploi
Quantum
Quantum DLTtape DLT1 Manuel utilisateur
Quantum
Quantum DLTtape SDLT 600 Manuel utilisateur
Quantum
Quantum Scalar 50 Manuel utilisateur
Quantum
Quantum StorNext QD7000 Manuel utilisateur
Quantum
Quantum LTO 2U Feuille d'instructions
Quantum
Quantum DLTtape DLT 8000 Manuel utilisateur
Quantum
Quantum Tape Drive A-Series Manuel utilisateur
Quantum
Quantum DLT-V4 Manuel utilisateur
Quantum
Quantum ACL 4/52 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur