Quantum DXi9000 Series Manuel utilisateur

Array Module and Expansion Module Rear

The rear of the Array Module contains two controllers. The rear of each Expansion Module contains two I/O modules.

These components are the same for all DXi9000 Series systems. See details below:

DXi9000 Series QUICK START

Using variable-length deduplication, DXi9000 Series systems provide scalable backup storage and disaster recovery

protection across sites. They can also replicate the data as part of disaster recovery. The DXi9000 Series includes the

DXi9000 and DXi9100. The DXi9000 is available in two storage options: Standard Density (SD) and High Density (HD).

The DXi9100 is available with HD storage. For installation instructions, including pre-installation requirements, log in to

CSWeb, and access the DXi9000 Series Service Documentation Center: https://qsweb.quantum.com/DXi9000_Service.

Activate the warranty and register the system with Quantum: www.quantum.com/startup

Page 1

Node

The front and back components are similar for all DXi9000 Series systems.

Node Front

Left control

panel Information tag

Solid state drives

(16 x drives shown in example)

Right control

panel Node Back

Optional Ethernet or

Fibre Channel ports

SAS

ports Power

supplies

2 x 10 GbE ports

Ethernet

link rate

SAS drive

expansion

port fault

SAS drive

expansion

activity

SAS host/

expansion

activity

Ethernet activity

SAS host/

expansion

fault

Tray ID and

error code

Activity

Locate

Cache

active

Array Module Controller

Attention

Expansion Module I/O Module

SAS drive expansion

port fault

SAS drive

expansion

activity

Locate

Attention

SD Array Module and Expansion Module Front

Hard drives

Power, Service, and Locate LEDs

HD Array Module and Expansion Module Front

Power, Service, and Locate LEDs

Tray ID and error code

Array Module and Expansion Module Front

The DXi9000 SD system includes one SD Array Module, and up to nine SD Expansion Modules. The DXi9000 HD system

includes one HD Array Module and can include one additional HD Expansion Module. The DXi9100 system can include

up to two HD Array Modules and up to two HD Expansion Modules.

Tray ID and error code

Hard drive

drawer

1 GbE port

Service port

4 x 1 GbE ports

(DXi9100 only)

The installation and initial configuration process

consists of the following six main steps:

1. Choose a location

2. Prepare for the installation

3. Unpack the system

4. Install the system in the rack

5. Initialize the storage arrays and software:

Step 1 -Access the Service Menu

a. Connect a laptop to the Service Port with an Ethernet cable.

b. Update the laptop's IPv4 Ethernet settings (TCP/IPv4

address: 10.17.21.200 and Subnet mask: 255.255.255.0).

c. Create an SSH connection to the DXi using 10.17.21.1

and log in using the default ServiceLogin password.

Step 2 -Perform Pick to Order Configuration

6. Perform the initial configuration:

Step 1 -Access the DXi GUI

Step 2 -Complete the Getting Started Wizard

Step 3 -Connect the Ethernet Cables Used for

Management, NAS, Application Specific, OST, and

Replication

Step 4 -Install the Bezel

Step 5 -Additional System Configuration

Installing and Initially Configuring the System

Page 2

*6-68870-01*

Detailed installation and initial configuration instructions are available in the DXi9000 Series Service Documentation

Center by going to Install > DXi Series System Installation and then selecting your DXi9000 Series model.

For safety information, go to Resources > Safety Information in the DXi9000 Series Service Documentation Center.

Service port

Service laptop

Node

Ethernet

cable

Refer to the DXi9000 Series Service Documentation Center

for detailed instructions on the following:

Software Upgrade: Verify that the DXi is up-to-date with

the latest software by clicking the Software Upgrade link

on the Home page.

Configuration Wizards: Start configuring NAS, Application

Specific, VTL, OST, and replication, users, email alerts, and

support items by clicking the Wizards button on the main

menu.

DXi Best Practice Guides: Click the Best Practices Guide

button on the GUI to access guides that describe how to

integrate the DXi with key backup applications.

Cloud-Based Analytics (CBA) Configuration:

1. Enable and configure CBA in the DXi GUI by going to

Wizards > Support or Configuration > System > CBA.

2. Request a CBA account at https://insight.quantum.com.

Software Upgrade link

Configuration Wizards button

Best Practices Guide button

Autres manuels Quantum Stockage

Quantum

Quantum RDX 8000 Manuel utilisateur

Quantum

Quantum Scalar i6000 Manuel technique

Quantum

Quantum LTO 3 Manuel utilisateur

Quantum

Quantum Atlas III Mode d’emploi

Quantum

Quantum ATL M1500 Manuel utilisateur

Quantum

Quantum F2000 Manuel utilisateur

Quantum

Quantum Tape Drive SDLT 600A Manuel utilisateur

Quantum

Quantum DLT-V4 Manuel utilisateur

Quantum

Quantum StorNext M330 Instructions d'installation

Quantum

Quantum P4000 Series Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum DXi4701 Manuel utilisateur

Quantum

Quantum DAT 160 Manuel utilisateur

Quantum

Quantum PowerStor L200 Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum DLTtape SDLT 220 Fiche d'information produit

Quantum

Quantum DX3000 Manuel utilisateur

Quantum

Quantum LTO-6 Manuel utilisateur

Quantum

Quantum DLTtape SDLT 220 Manuel utilisateur

Quantum

Quantum DXi6900 Manuel utilisateur

Quantum

Quantum 6-67057-02 Rev A Manuel utilisateur

Quantum

Quantum DLTtape DLT 8000 Manuel utilisateur

Quantum

Quantum StorNext QD6000 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur