Quantum DLTtape SDLT 220 Fiche d'information produit

Quantum

SDLT 220 & SDLT 320

User Reference Guide

User Manual Statements for Class A Equipment (Internal Tape System)

This is a Class A product. This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area may cause

harmful interference in which case the user will be required to correct the interference at his own expense.

Any modifications to this device—unless expressly approved by the manufacturer—can void the user’s authority to

operate this equipment under Part 15 of the FCC rules.

User Manual Statements for Class B Equipment (Tabletop Tape System)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi-

dential installation. Any modifications to this device—unless expressly approved by the manufacturer—can void the

user’s authority to operate this equipment under part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that

may cause undesirable operation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or TV technician for help.

Contents | SDLT 220 and SDLT 320 User Reference Guide

Contents

A Using the Tape Drive

A1 Handling the Tape Drive and Data Cartridges

A2 Indicators and Controls

A3 Loading and Unloading Data Cartridges

A4 Cleaning the Tape Heads

B Using Data Cartridges

B1 Super DLTtape Media

B2 Write-protecting Data Cartridges

B3 Media Care Guidelines

B4 Inspecting Data Cartridges

C SCSI Connectivity

C1 SCSI Connectors

C2 SCSI Controller Interfaces

C3 Setting the SCSI ID

C4 Connections: Single Drive

C5 Connections: Daisy Chain

D Troubleshooting Tape Drive Problems

D1 Using the Power-On Self-Test

D2 General Troubleshooting

D3 SCSI Troubleshooting

D4 Checking for Tape Drive Errors

D5 Optimizing the Tape Drive

E Tape Drive Information

E1 Specifications

E2 Regulatory Information

Pointers for Using this Guide

!Pay attention to these points. They are important for tape

drive operation.

 A1

Follow these cross references for information on related

topics.

A1 | Handling the Tape Drive and Data Cartridges

A Using the Tape Drive

A1 Handling the Tape Drive

and Data Cartridges

Handling the Tape Drive

!Do not carry the tape drive by inserting your fingers into

the receiver area. You could damage the tape drive if you

lift or carry it in this manner.

Do not stand the tape drive on its front panel.

Always place the tape drive on a flat, stable surface.

Avoid dusty, humid, or smoke-filled areas.

Use proper Electrostatic Discharge (ESD) protection.

Allow at least 6 inches of space behind the drive for

ventilation.

Handling Data Cartridges

Protect cartridges from shock, vibration, moisture, direct

sunlight, dust, smoke, and magnetic fields.

Use the slide-in labels provided. Do not use adhesive

labels or Post-it®notes, and do not write on the cartridge.

Never touch the tape or tape leader. Dust and oils from

your skin contaminate the tape and affect performance.

Keep cartridges in their protective cases when not in use.

Store data cartridges vertically.

!Always visually inspect a data cartridge before placing it

in the tape drive. If it is damaged, do not use the cartridge.

B4

!Never power off the tape drive while it contains a

cartridge.

For a more comprehensive list of data cartridge handling

guidelines, B3.

Receiver

Area

Protective Case

Indicators and Controls | A2

A2 Indicators and Controls

Note: Upon reset, all LEDs flash briefly and then illuminate

in sequence until the tape drive is ready for use. All

LEDs flash when the tape drive encounters an error.

Color LED Action Explanation

Amber SDLT

220

Write

Protect

Off

The cartridge is write-protected.

The cartridge is write-enabled.

SDLT

320

Drive

Density

Off

The cartridge is 220-formatted.

The cartridge is 320-formatted.

Green Drive

Status

On The tape drive is idle. The tape drive

may or may not contain a cartridge.

Off The tape drive has not been powered

on or is not plugged into a power

source.

Flashing The tape drive is in use. This

includes functions such as:

• Loading and unloading tape

• Reading

• Writing

• Rewinding

• Calibrating

Yellow Cleaning

Required

On Cleaning is required.

Off Cleaning is not required.

Eject N/A Press Use the Eject button to eject a data

cartridge from the tape drive. When

you press Eject, the tape drive

finishes writing data to the tape,

then ejects the cartridge.

Infrared Port The infrared port provides a wireless

remote testing base for customers

and integrators to access system

diagnostic information.

This section describes the tape drive

controls as well as tape drive and

data cartridge conditions communi-

cated by the LEDs on the front of

the tape drive.

A3 | Loading and Unloading Data Cartridges

A3 Loading and Unloading

Data Cartridges

To Load a Data Cartridge

1. Insert the data cartridge into the receiver on the front of the

tape drive.

2. Push the cartridge completely into the receiver.

The green Drive Status LED (A2)flashes as the tape loads.

When the tape reaches the Beginning of Tape (BOT) marker,

the Drive Status and Drive Density LEDs (A2)light

steadily, indicating that the cartridge is ready for use.

To Unload a Data Cartridge

1. Press the Eject button on the front bezel.

The tape drive completes writing data to the tape, and the

green LED (A2) flashes as the tape rewinds.

When the tape reaches the BOT marker, the tape drive ejects

the data cartridge. The green LED lights steadily.

2. Remove the cartridge from the tape drive and return it to its

plastic case (A1).

Eject

Drive

Status

Cleaning the Tape Heads | A4

A4 Cleaning the Tape Heads

Over time, ambient pollution and particulates in the

environment contaminate the tape heads. The tape drive

indicates when cleaning is required by illuminating the

yellow Cleaning Required LED. A2

!Do not clean the tape heads unless the Cleaning Required

LED is illuminated.

!Use ONLY the SDLT CleaningTape. Other cleaning tapes,

such as CleaningTape III or DLT VS CleaningTape, are

incompatible with the SDLT 220/320 tape drive heads.

To Clean the Tape Heads

1. Insert a Super DLTtape cleaning cartridge (the brand name

to look for is SDLTtape™ CleaningTape) into the tape

drive.

The green Drive Status LED flashes and the cleaning cycle

begins automatically.

When the cleaning cycle completes, the tape drive

automatically ejects the CleaningTape; turns off the Cleaning

Required LED; and steadily illuminates the Drive Status

LED.

2. Remove the CleaningTape, place it back in its plastic case,

and mark the label after each cleaning.

Note: On the last cleaning, the tape drive does not eject the

CleaningTape. Use the Eject button on the front of the

tape drive to eject the expired cleaning cartridge and

dispose of it.

Cleaning

Required

B1 | Super DLTtape Media

B Using Data Cartridges

B1 Super DLTtape Media

From the outside, the Super DLTtape I cartridge looks very

similar to the DLTtape IV cartridges. The basic geometry,

write-protect switch, and label space are unchanged from the

DLTtape IV cartridge. This simplifies the integration of

Super DLTtape into existing operating environments and

into automated tape libraries.

The Super DLTtape I cartridge is easy to recognize; it has

a different color (green) than the DLTtape IV cartridge

(charcoal gray) and contains a distinctive pattern molded

into the shell. The Super DLTtape I cartridge has a keying

feature to ensure that it cannot be loaded into previous

generation DLTtape drives.

Both the SDLT 220 and SDLT 320 tape drives feature an

optional backward-read compatibility (BRC) mode. When in

BRC mode, the drives are capable of reading DLTtape IV

tapes with DLT 4000, DLT 7000, DLT 8000, and DLT 1

formats. The Backward-Read Compatibility table below lists

BRC rates for the Super DLTtape drive.

Backward-Read Compatibility

Format Cartridge Type Native Capacity (GB)

Native Read Transfer

Rate (MB/second)

SDLT 320 SDLT I 160 16.0

SDLT 220 SDLT I 110 11.0

DLT 8000 DLT IV 40 4.0

DLT 7000 DLT IV 35 3.5

DLT 4000 DLT IV 20 1.5

DLT 1 (Benchmark) DLT IV 40 3.0

Notes:

• Transfer rates quoted are nominal, measured reading uncompressed data.

• Non-SDLT drives will eject a cartridge written in SDLT 320 format.

• The SDLT 320 can read and write the SDLT 220 format at the native SDLT 220 transfer rate of

11.0 MB/s.

Write-protecting Data Cartridges | B2

B2 Write-protecting Data

Cartridges

To prevent accidental erasure of your data, each data

cartridge has a write-protect switch. When active, this switch

prevents the tape drive from writing data to the cartridge.

!For valuable data, always make sure the cartridge is

write-protected before inserting it into the tape drive.

To enable write-protection:

Move the write-protect switch left so that the bright

orange rectangle is visible.

To disable write-protection:

Move the write-protect switch right so that the orange

rectangle is not visible.

On the SDLT 220 tape drive, when you insert a write-

protected cartridge into the drive, the amber LED on the

front panel lights.

On the SDLT 320 tape drive, the amber LED indicates the

format of the tape: Light on or blinking indicates SDLT 220

density; light off indicates SDLT 320 density.

Move switch down to

write-protect media.

Orange indicates

write-protected.

SDLT 220 – Write Protect LED

SDLT 320 – Drive Density LED

Autres manuels pour DLTtape SDLT 220

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Quantum Stockage

Quantum

Quantum LTO-4 (Model B) Manuel utilisateur

Quantum

Quantum P1000 Series Manuel utilisateur

Quantum

Quantum DXi V-Series Manuel utilisateur

Quantum

Quantum StorNext QD7000 Instructions d'installation

Quantum

Quantum LTO-9 HH SAS Manuel utilisateur

Quantum

Quantum Atlas 10K II Manuel utilisateur

Quantum

Quantum RDX 8000 Manuel utilisateur

Quantum

Quantum StorNext QS1200 Manuel utilisateur

Quantum

Quantum StorNext M660 Instructions d'installation

Quantum

Quantum FastStor 1 Manuel utilisateur

Quantum

Quantum DLT-S4 Manuel utilisateur

Quantum

Quantum Scalar 50 Mode d’emploi

Quantum

Quantum F2000 Manuel utilisateur

Quantum

Quantum DXi4601 Manuel utilisateur

Quantum

Quantum PX506 Manuel utilisateur

Quantum

Quantum DAT 72 Manuel utilisateur

Quantum

Quantum DXi6900 Guide de démarrage rapide

Quantum

Quantum PX720 Manuel utilisateur

Quantum

Quantum QX Series Manuel utilisateur

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum Scalar i40 Manuel utilisateur

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum DXi6900 Guide de démarrage rapide

Quantum

Quantum Scalar 50 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur