ProLights RA2000PROFILE Manuel utilisateur

USER MANUAL

MANUALE UTENTE

RA2000PROFILE

LED MOVING PROFILE

EN - IT

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV .02-05/19

RA2000PROFILE

Packing content • RA2000PROFILE

• Power cable

• OS25 (2 pcs)

• Safety cable

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specifications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Linking

3. 5 DMX addressing configuration

3. 6 DMX mode configuration

3. 7 DMX addressing

3. 8 Wireless settings

3. 9 Ethernet

3. 10 Movement

3. 11 Screen

3. 12 Fixture settings

3. 13 Fans mode

3. 14 Led red mode

3. 15 Auto and manual test

3. 16 Reset of the function

3. 17 Adjust

3. 18 Informaion of the device

3. 19 DMX view

3. 20 Connection of the DMX line

3. 21 Construction of the DMX termination

3. 22 DMX control

3. 23 Color - Gobos wheel

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

RA2000PROFILE

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modiﬁcations on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system ﬁtted with eﬃcient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualiﬁed electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the ﬁxture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inﬂammable liquids, water or metal objects enter the ﬁxture.

• Do not dismantle or modify the ﬁxture.

• All work must always be carried out by qualiﬁed technical personnel. Contact the nearest sales point

for an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation deﬁnitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way diﬀerent to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut oﬀ power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always

comply scrupulously with all the regulations (particularly regarding safety) currently in force in the

country in which the ﬁxture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the ﬁxture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the ﬁxture in a well ventilated place.

• Keep any inﬂammable material at a safe distance from the ﬁxture.

• The maximum temperature that can be reached on the external surface of the ﬁtting, in a thermally

steady state, is high. After power oﬀ, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eﬀectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ﬂashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

RA2000PROFILE

- 1 - INTRODUCTION

1.1 DESCRIPTION

The RA2000PROFILE has been designed in response to feedback from global users and by lighting de-

signers. A universal moving proﬁle/spot that lighting designers and users can use for theatrical, touring

and TV productions. Powerful but silent, compact but fully equipped with both framing shutters and

animation wheel, all whilst delivering a superior light quality, the RA2000PROFILE is an indispensable

tool for any show.

The 6000K LED engine has been custom engineered to make the RA2000PROFILE hit a 13.000-lumen

output, keeping a native CRI of 94, TLCI of 92, high R9 and TM30 making all skin tones and colours come

to life on stage or in front of a camera.

The RA2000PROFILE’s CMY system delivers beautiful pastels, stunning saturated colours, powerful prima-

ries, one colour wheel provides split colours, and linear CTO allows the RA2000PROFILE to blend in with

traditional sources.

Packed with a full feature set composed of a gobo wheel, adjustable framing shutters, animation wheel,

iris, prism and dual linear frost. The highly eﬃcient optical system delivers a 1:8 zoom from 6° to 48°, and

crisp focus to perfectly merge multi-layer eﬀects.

The RA2000PROFILE is the real embodiment of solid-state LED technology.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 540W LED

• CT: 6000K

• CRI: 94

• R9: 78

• Luminous ﬂux: 13000lm

• Lux: (6°) 32200 lux - (48°) 916lux @5m

• Source life expectancy: 60000

• Other: TM-30-15RF/RG: 90/99 - TLCI: (6°) 92.7 - (48°) 93.3

OPTICS

• Zoom: 6°-48° motorised linear zoom

• Lens diameter: 120mm

• Focus: motorised

COLOUR SYSTEM

• Colour mixing: linear CMY

• CTC: amber shift activation by DMX and linear CTO correction 2700~6000K

• Colour wheel: 6 dichroic ﬁlters + open

DYNAMIC EFFECTS

• Shutter system: 4 shutter blades with position and ±30° angle adjustment, ±45° rotation of the com-

plete framing system

• Animation wheel: animation wheel with CW and CCW rotation

• Rotating gobos: 7 rotating gobos + open, interchangeable, indexing

• Gobo size: Ø 26.9 mm - img Ø 21.5 mm - 1.1 mm

• FX generator: shutter macros with adjustable speed

• Circular prism: 4f with bi-directional rotation, indexing

RA2000PROFILE

• Frost: Dual frost ﬁlter system, 1° soft-edge frost gobo, 5° frost wash, with linear 0-100% frost ﬁlter frost

unit to soften the beam edge

• Iris: 5 - 100% motorised linear iris

• Static colour mode: selection of static colour

• Manual colour mode: manual adjustment of dimmer and strobe

BODY

• Pan angle: 540°

• Tilt angle: 270°

• Pan/Tilt resolution: 16 bit

• Feedback: automatic repositioning after accidental movement

• Body colour: black ﬁnishing

CONTROL

• Protocols: DMX512, RDM, Art-Net,W-DMX

• DMX channels: 38 / 39 / 40 / 41 / 44 channel

• W-DMX: included, wireless solution receiver

• RDM: RDM ready for ﬁxture remote monitor and settings

• Display: TFT high resolution colour display with autoﬂip

• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included

ELECTRONICS

• Dimmer: linear 0~100% electronic dimmer

• Strobe / shutter: 1-30 Hz, electronic

• Battery backup: battery backup for user operation without connecting to the main power

• Operating temperature: -10° ~ +50°

• Flicker: ﬂicker free operation

ELECTRICAL

• Power consumption: 150 W / 600 W

• Power supply: 100-240V – 50/60Hz

• Power consumption (at 230V): (static) 574 W - (dynamic) 620W

• Power consumption (at 120V): (static) 606 W - (dynamic) 640W

• Output (at 230V): 4 units on a single power line

• Output (at 120V): 2 units on a single power line

• Power factor: pF 0.95 @ 230 V - pF 0.99 @ 120 V

PHYSICAL

• Cooling: combination of heat pipe cooling system and low noise fan

• Sospension and ﬁxing: hanging bracket for ﬂoor positioning with“Quick-Lock” system

• Pan / tilt lock: pan / tilt locking for transportation and maintenance

• Signal connection: Amphenol XLR 5p IN/OUT connectors

• Data connection: Art-Net RJ45 IN/OUT

• Power connection: Neutrik powerCON TRUE1 IN/OUT connectors

• IP rating: 20

• Dimensions (WxHxD): 443x697x507mm

• Weight: 31.38kg

RA2000PROFILE

443

697

293

443

697

507

Technicaldrawing Fig.1

RA2000PROFILE

6 7

89 10 11 11 12 13

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. MOVING HEAD

2. TILT Mechanism Lock and Release

3. ROTARY ARM

4. PAN Mechanism Lock and Release

5. BASE

6. HANDLE

7. CONTROL PANEL with TFT display

and 5 button used to access

the control panel functions and

manage them.

8. POWER IN (PowerCON TRUE

IN): for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

9. POWER OUT (PowerCON

TRUE OUT): power output for

connection of multiple units in

series.

10. MAIN FUSE HOLDER: replace a

burnt-out fuse by one of the same

type only.

11. EtherCON CONNECTORS IN / OUT

signal.

12. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

13. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

14. ANTENNA

15. RUBBER FEET

Fig.2

RA2000PROFILE

- 2 - INSTALLATION

2.1 MOUNTING

The RA2000PROFILE may be set up on a solid and even surface. By means of the ﬁxing facilities of the

baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in ﬁg.3. For

ﬁxing, stable mounting clips are required. According to the ﬁgure, the bolts of the brackets are placed into

the openings provided in the base plate and turned clockwise until they lock (to the stop). Always ensure

that the unit is ﬁrmly ﬁxed to avoid vibration and slipping while operating. The mounting place must be of

suﬃcient stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any

installation, always comply scrupulously with all the regulations (particularly regarding safety) currently

in force in the country in which the ﬁxture’s being used. Always additionally secure the projector with the

safety rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the

maximum fall of the projector will be 20 cm.

Fig.3

CLAMPS

OMEGA

RA2000PROFILE

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program

to reset all motors to their home position. Shortly after that the RA2000PROFILE is ready for operation.

To switch oﬀ, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and oﬀ via light switch.

NOTE: remove the pan and tilt lock before connecting the RA2000PROFILE to the power supply.

3.2 BASIC

The control panel of RA2000PROFILE has a display and 5 buttons for the complete programming and

management of the projector menu (ﬁg.4).

Fig.4 - Functions of the buttons and display icons

UP DOWN LEFT RIGHT ENTER

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Return to the top

level

Commute from

units, tens, hundred

in the menu

Confirms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

Table des matières

Langues :

Autres manuels ProLights Matériel de DJ

ProLights

ProLights 4MOON Manuel utilisateur

ProLights

ProLights ASTROBEAM Manuel utilisateur

ProLights

ProLights TRIPLESCAN Manuel utilisateur

ProLights

ProLights Pendant stations Manuel utilisateur

ProLights

ProLights TRIBE LUMIPIX12UT Manuel utilisateur

ProLights

ProLights SMARTTUBE32 Manuel utilisateur

ProLights

ProLights LUMIPAR6UQ Manuel utilisateur

ProLights

ProLights PHYRO1200SNOW Manuel utilisateur

ProLights

ProLights RA2000PROFILEHB Manuel utilisateur

ProLights

ProLights ARIA 700SPOT Manuel utilisateur

ProLights

ProLights ARCLED7337VW Manuel utilisateur

ProLights

ProLights PIXBAR4 Manuel utilisateur

ProLights

ProLights CROMOBEAM260 Manuel utilisateur

ProLights

ProLights PIXIEWASHXB Manuel utilisateur

ProLights

ProLights STARBALL Manuel utilisateur

ProLights

ProLights ECLIPSEHDTWC Manuel utilisateur

ProLights

ProLights LumiPix XB050 Manuel utilisateur

ProLights

ProLights Mobiblast Manuel utilisateur

ProLights

ProLights ARCLED7307HD Manuel utilisateur

ProLights

ProLights EclSoft LinearIP Manuel utilisateur

ProLights

ProLights RA3000Profile Manuel utilisateur

ProLights

ProLights HZ660D Manuel utilisateur

ProLights

ProLights Z7SPOT Manuel utilisateur

ProLights

ProLights 6 BEAM Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur