PowerWalker VI TW Series Manuel utilisateur

User Manual

PowerWalker VI TW Series

Uninterruptible Power Supply System

Version: 1.0

Table of Contents

1. Important Safety Warning ................................................................................................1

1-1. Transportation..........................................................................................................1

1-2. Preparation...............................................................................................................1

1-3. Installation ...............................................................................................................1

1-4. Operation .................................................................................................................1

1-5. Maintenance, service and faults .................................................................................2

2. Installation And Setup......................................................................................................4

2-1. Rear panel view ........................................................................................................4

2-2. Operating principle ...................................................................................................5

2-3. Setup the UPS ..........................................................................................................5

3. Operations ......................................................................................................................7

3-1. Button operation.......................................................................................................7

3-2. LCD Panel.................................................................................................................7

3-3. Audible Alarm ...........................................................................................................8

3-4. LCD display wordings index .......................................................................................9

3-5. UPS Setting ..............................................................................................................9

3-6. Operating Mode Description.....................................................................................12

3-7. Faults Reference Code.............................................................................................12

3-8. Warning indicator ...................................................................................................13

4. Troubleshooting.............................................................................................................14

5. Storage and Maintenance ...............................................................................................15

6. Specifications ................................................................................................................16

1. Important Safety Warning

Please comply with all warnings and operating instructions in this manual strictly. Save this

manual properly and read carefully the following instructions before installing the unit. Do not

operate this unit before reading through all safety information and operating instructions

carefully

1-1. Transportation

Please transport the UPS system only in the original package to protect against shock

and impact.

1-2. Preparation

Condensation may occur if the UPS system is moved directly from cold to warm

environment. The UPS system must be absolutely dry before being installed. Please

allow at least two hours for the UPS system to acclimate the environment.

Do not install the UPS system near water or in moist environments.

Do not install the UPS system where it would be exposed to direct sunlight or near

heater.

Do not block ventilation holes in the UPS housing.

1-3. Installation

Do not connect appliances or devices which would overload the UPS system to

the UPS output sockets.

Place cables in such a way that no one can step on or trip over them.

Do not connect domestic appliances such as hair dryers to UPS output sockets.

The UPS can be operated by any individuals with no previous experience.

Connect the UPS system only to an earthed shockproof outlet which must be easily

accessible and close to the UPS system.

Please use only VDE-tested, CE-marked (or UL-marked for 110/115/120/127 VAC

models) mains cable (e.g. the mains cable of your computer) to connect the UPS

system to the building wiring outlet (shockproof outlet).

Please use only VDE-tested, CE-marked (or UL-marked for 110/115/120/127 VAC

models) power cables to connect the loads to the UPS system.

When installing the equipment, it should ensure that the sum of the leakage current

of the UPS and the connected devices does not exceed 3.5mA.

Temperature Rating - Units are considered acceptable for use in a maximum

ambient of 40°C (104°F).

For Pluggable Equipment - The socket-outlet shall be installed near the equipment

and shall be easily accessible.

1-4. Operation

Do not disconnect the mains cable on the UPS system or the building wiring outlet

(shockproof socket outlet) during operations since this would cancel the protective

earthing of the UPS system and of all connected loads.

The UPS system features its own, internal current source (batteries). The UPS output

sockets or output terminals block may be electrically live even if the UPS system is not

connected to the building wiring outlet.

In order to fully disconnect the UPS system, first press the OFF/Enter button to

disconnect the mains.

Prevent no fluids or other foreign objects from inside of the UPS system.

1-5. Maintenance, service and faults

The UPS system operates with hazardous voltages. Repairs may be carried out only

by qualified maintenance personnel.

Caution - risk of electric shock. Even after the unit is disconnected from the mains

(building wiring outlet), components inside the UPS system are still connected to the

battery and electrically live and dangerous.

Before carrying out any kind of service and/or maintenance, disconnect the batteries

and verify that no current is present and no hazardous voltage exists in the terminals

of high capability capacitor such as BUS-capacitors.

Only persons are adequately familiar with batteries and with the required

precautionary measures may replace batteries and supervise operations.

Unauthorized persons must be kept well away from the batteries.

Caution - risk of electric shock. The battery circuit is not isolated from the input

voltage. Hazardous voltages may occur between the battery terminals and the

ground. Before touching, please verify that no voltage is present!

Caution - Do not dispose of batteries in a fire. The batteries may explode.

Caution - Do not open or mutilate batteries. Released electrolyte is harmful to the

skin and eyes. It may be toxic.

a) Batteries may cause electric shock and have a high short-circuit current. Please

take the precautionary measures specified below and any other measures

necessary when working with batteries: Remove watches, rings, or other metal

objects.

b) Use tools with insulated handles.

c) Wear rubber gloves and boots.

d) Do not lay tools or metal parts on top of batteries.

e) Disconnect charging source and load prior to installing or maintaining the

battery.

f) Remove battery grounds during installation and maintenance to reduce

likelihood of shock. Remove the connection from ground if any part of the

battery is determined to be grounded.

When changing batteries, install the same number and same type of batteries.

Manufacture

Type

Rated

Toplite (Guangzhou)

Technology Battery Co Ltd

(MH29104)

NPW45-12

12 V dc, 9.0 Ah

UXW460-12

12 V dc, 9.0 Ah

NPW36-12

12 V dc, 7.2 Ah

UXW360-12

12 V dc, 7.2 Ah

NPW45-12 FR

12 V dc, 7.0 Ah

UXW460-12/FR

12 V dc, 7.0 Ah

NPW36-12 FR

12 V dc, 7.0 Ah

CSB Battery Co Ltd

(MH14533)

UXW360-12/FR

12 V dc, 7.0 Ah

GP1272

12 V dc, 7.2 Ah

UPS 12460 F2

12 V dc, 9.0 Ah

UPS 12360 6

12 V dc, 6.5 Ah

UPS 12360 7

12 V dc, 6.5 Ah

HR 1234W

12 V dc, 8.5 Ah

HR 1234W FR

12 V dc, 8.5 Ah

Yuasa Battery (Guangdong)

Co Ltd (MH29616)

NPW45-12

12 V dc, 8.0 Ah

NPW45-12FR

12 dc, 8.0 Ah

For UPS with internally mounted battery

a) Instructions shall carry sufficient information to enable the replacement of the

battery with a suitable manufacturer and catalogue number.

b) Safety instructions to allow access by Service Personnel shall be stated in the

installation/service handbook.

c) If batteries are to be installed by Service Personnel, instructions for

interconnections, including terminal torque, shall be provided.

Do not attempt to dispose of batteries by burning them. This could cause battery

explosion.

Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin

and eyes. It may be toxic.

Please replace the fuse only with the same type and amperage in order to avoid fire

hazards.

Do not dismantle the UPS system.

WARNING: This is a category C2 UPS product. In a residential environment, this

product may cause radio interference, in which case the user many be required to take

additional measures. (only for 220/230/240 VAC system)

Only for 110/115/120/127 VAC system:

NOTE: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

WARNING: Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

2. Installation And Setup

NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is

damaged. Please keep the original package in a safe place for future use.

2-1. Rear panel view

IEC Type

1.1K/1.5K 2K/3K

NEMA Type

1.1K/1.5K 2K

1. Programmable outlets: connect to non-critical loads.

2. Output receptacles: connect to mission-critical loads.

3. AC input

4. Emergency power off function connector (EPO)

5. USB communication port

6. RS-232 communication port

7. SNMP intelligent slot

8. External battery connector Output terminal

2-2. Operating principle

The operating principle of the UPS is shown as below.

EMI/RFI

Filters

Battery

Charger Battery

DC-to-DC

Converter

Inverter

AVR

Output

The UPS is composed of mains input, EMI/RFI filters, inverter, battery charger, DC-to-DC

converter, battery, AVR TX and UPS output

2-3. Setup the UPS

Before installing the UPS, please read below to select proper location to install UPS.

1. UPS should be placed on the flat and clean surface. Place it in an area away from vibration,

dust, humidity, high temperature, flammable liquids, gases, corrosive and conductive

contaminants. Install the UPS indoors in a clean environment, where it is away from window

and door. Maintain minimum clearance of 100mm in the bottom of the UPS to avoid dust and

high temperature.

2. Maintain an ambient temperature range of 0ºC to 45ºC for UPS optimal operation. For every

5ºC above 45ºC, the UPS will derate 12% of nominal capacity at full load. The highest working

temperature requirement for UPS operation is 50ºC.

3. It’s required to maintain maximum altitude of 1000m to keep UPS normal operation at full

load UPS. If it’s used in high altitude area, please reduce connected load. Altitude derating

power with connected loads for UPS normal operation is listed as below:

4. Place UPS:

It’s equipped with fan for cooling. Therefore, place the UPS in a

well-ventilated area. It’s required to maintain minimum clearance

of 100mm in the front of the UPS and 300mm in the

back and two

sides of the UPS for heat dissipation and easy-maintenance.

Step 1: UPS input connection

Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension

cords.

Step 2: UPS output connection

There two kinds of outputs: programmable outlets and general outlets. Please connect non-

critical devices to the programmable outlets and critical devices to the general outlets.

During power failure, you may extend the backup time to critical devices by setting shorter

backup time for non-critical devices.

Step 3: Communication connection

Communication port:

USBport

RS-232 port Intelligent slot

To allow for unattended UPS shutdown/start-up and status monitoring, connect the

communication cable one end to the USB/RS-232 port and the other to the communication

port of your PC. With the monitoring software installed, you can schedule UPS

shutdown/start-up and monitor UPS status through PC.

The UPS is equipped with intelligent slot perfect for either SNMP or AS400 card. When

installing either SNMP or AS400 card in the UPS, it will provide advanced communication and

monitoring options.

Step 4: Disable and enable EPO function

This UPS is equipped with EPO function. By default, the UPS is delivered from factory with Pin

1 and pin 2 closed (a metal plate is connected to Pin 1 and Pin2) for UPS normal operation. To

activate EPO function, remove two screws on EPO port and green connector will be removed.

Note: The EPO function logic can be set up via LCD setting. Please refer to program 8 in UPS

setting for the details.

Step 5: Turn on the UPS

Press the ON/Mute button on the front panel for two seconds to power on the UPS.

Note: The battery charges fully during the first five hours of normal operation. Do not

expect full battery run capability during this initial charge period.

Step 6: Install software

For optimal computer system protection, install UPS monitoring software to fully configure UPS

shutdown. Use supplied RS-232 or USB communication cable to connect RS-232/USB port of

UPS and RS-232/USB port of PC. Then, follow below steps to install monitoring software.

Insert the included installation CD into CD-ROM drive and then follow the on-screen

instructions to proceed software installation. If there no screen shows 1 minute after

inserting the CD, please execute setup.exe file for initiating software installation.

Follow the on-screen instructions to install the software.

When your computer restarts, the monitoring software will appear as an orange plug icon

located in the system tray, near the clock.

It’s in closed status for UPS

normal operation as default.

To activate EPO function, remove

these two screws.

3. Operations

3-1. Button operation

Button

Function

ON/MUTE Button

Turn on the UPS: Press and hold ON/Mute button for at least 2

seconds to turn on the UPS.

Mute the alarm: After the UPS is turned on in battery mode, press

and hold this button for at least 3 seconds to disable or enable the

alarm system. But it’s not applied to the situations when warnings or

errors occur.

Up key: Press this button to display previous selection in UPS setting

mode.

Switch to UPS self-test mode: Press and hold ON/Mute button for 3

seconds to enter UPS self-testing while in AC mode

OFF/ENTER

Button

Turn off the UPS: Press and hold this button at least 2 seconds to

turn off the UPS

Confirm selection key: Press this button to confirm selection in UPS

setting mode.

SELECT Button

Switch LCD message: Press this button to change the LCD message

for input voltage, input frequency, battery voltage, battery capacity,

ambient temperature, output voltage, output frequency, load current

and load percentage.

Setting mode: Press and hold this button for 3 seconds to enter UPS

setting mode when UPS is off.

Down key: Press this button to display next selection in UPS setting

mode.

ON/Mute +

Select Button

Exit setting mode or return to the upper menu: When working in

setting mode, press ON/Mute and Select buttons simultaneously for

0.2 seconds to return to the upper menu. If it’s already in top menu,

press these two buttons at the same time to exit the setting mode.

3-2. LCD Panel

Display

Function

Backup time information

Indicates the estimated backup time.

H: hours, M: minute, S: second.

Configuration and fault information

Indicates the configuration items, and the configuration items are listed in

details in section 3-5.

Indicates the warning and fault codes, and the codes are listed in details in

section 3-7 and 3-8.

Mute operation

Indicates that the UPS alarm is disabled.

Input, Battery, Temperature, Output & Load information

Indicate the input voltage, input frequency, battery voltage, battery

capacity, ambient temperature, output voltage, output frequency, load

current and load percentage.

k: kilo, W: watt, V: voltage, A: ampere, %: percent, ℃: centigrade degree, Hz: frequency

Load information

Indicates the load level by 0-24%, 25-49%, 50-74% and 75-100%.

Indicates overload.

Programmable outlets information

Indicates that programmable management outlets are working.

Mode operation information

Indicates the UPS connects to the mains.

Indicates the battery is working.

Indicates charging status

Indicates the ECO mode is enabled.

Indicates the UPS is working in boost mode

Indicates the UPS is working in buck mode

Indicates the AC to DC circuit is working.

Indicates the inverter circuit is working.

Indicates the output is working.

Battery information

Indicates the battery level by 0-24%, 25-49%, 50-74%, and 75-100%.

Indicates low battery.

3-3. Audible Alarm

Battery Mode

Sounding every 10 seconds

Low Battery

Sounding every 2 seconds

Overload

Sounding every second

Fault

Continuously sounding

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PowerWalker UPS

PowerWalker

PowerWalker 650 SH Manuel utilisateur

PowerWalker

PowerWalker VFI 6000 LCD Manuel utilisateur

PowerWalker

PowerWalker VFI 1000R/1U Manuel utilisateur

PowerWalker

PowerWalker VFI 10000CRM LCD Manuel utilisateur

PowerWalker

PowerWalker VFI 1000RM Manuel utilisateur

PowerWalker

PowerWalker VFI 1000 RMG PF1 Manuel utilisateur

PowerWalker

PowerWalker VFI 10000 CG PF1 Manuel utilisateur

PowerWalker

PowerWalker VFI 1000RM LCD Manuel utilisateur

PowerWalker

PowerWalker VFI 1000RT LCD Manuel utilisateur

PowerWalker

PowerWalker VFI 6000 TGB Manuel utilisateur

PowerWalker

PowerWalker VFI ICT IoT Series Manuel utilisateur

PowerWalker

PowerWalker VFI RT HID Series Manuel utilisateur

PowerWalker

PowerWalker VI 750 PSW Manuel utilisateur

PowerWalker

PowerWalker VFI 1000CRM LCD Manuel utilisateur

PowerWalker

PowerWalker VFI 1000 R1U Manuel utilisateur

PowerWalker

PowerWalker VI RLP Series Manuel utilisateur

PowerWalker

PowerWalker 1000VA Manuel utilisateur

PowerWalker

PowerWalker VFI 10K CPH Manuel utilisateur

PowerWalker

PowerWalker Basic VI SB Series Manuel utilisateur

PowerWalker

PowerWalker VFI 2000 CRM Manuel utilisateur

PowerWalker

PowerWalker VI 650 GX Manuel utilisateur

PowerWalker

PowerWalker VFD 400 Manuel utilisateur

PowerWalker

PowerWalker VFD 400 IEC Manuel utilisateur

PowerWalker

PowerWalker VI 400 Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur