PowerWalker VFI 1000 Manuel utilisateur

USER’S MANUAL

PowerWalker VFI 1000 / 3000VA

Uninterruptible Power Supply

CONTENTS

1. INTRODUCTION .............................................……........ 1

2. SAFTY INSTRUCTION...................……...…………….... 2

3. SYSTEM DESCRIPTION..........................……......…..... 4

4. CABLE CONNECTION ..............................…….......…... 7

5. OPERATION ................................................……........... 8

6. TROUBLE SHOOTING GUIDE.......................…….....… 13

7. OPERATION MODES OF THE UPS ..............……........ 17

8. COMPUTER INTERFACE ...........................……........... 19

9. SPECIFICATIONS.................................…………..…..... 21

1. INTRODUCTION

1.1 General Description

The continuity of electrical power is an essential requirement for critical load

operations. The Uninterruptible Power System (UPS) is designed to meet the

user‘s need of present computer, server and the equipment of office

automation that make the UPS more compact and less noisy.

To choose the UPS as your equipment protector is a wise investment

because it supplies reliable, pure and stable power at affordable price.

1.2 Key features

1. Multiple microprocessor and double-conversion design base.

2. Wide input range designed to operate under harsh environment.

3. High input power factor and DC-start function.

4. LED and LCD display for detail status and data; real-time alarm silence.

5. Enhanced protections against light, surges, and disturbance etc.

6. Remote monitoring with SNMP intelligent slot and RS-232 interface.

7. Light weight and compact size, easy to transport and place.

1.3 Important Notices

To be sure that the UPS will be operated correctly, the following items should

be noticed:

1. Read instructions carefully before operating the UPS.

2. UPS power connect instruction should be followed.

3. Please don‘t open the case to prevent danger.

4. If the UPS will be stored for long period, the battery must be charged once

every 90 days.

5. Retain the load within the rating of UPS to prevent faults.

6. Handle unusual events according to the trouble-shooting guide.

7. Keep the UPS clean and dry.

2. SAFTY INSTRUCTION

2.1 Transporting

1. Disconnect all power cables if necessary.

2. Be careful not to damage the UPS while transporting.

3. Don‘t move the UPS upside down.

4. Please transport the UPS system only in the original packaging (to protect

against shock and impact).

2.2 Positioning

1.Do not put the UPS on rugged or declined surface.

2.Do not install the UPS system near water or in damp environments.

3.Do not install the UPS system where it would be exposed to direct sunlight

or near heat.

4.Do not block off ventilation openings in the UPS system’s housing and don’t

leave objects on the top of the UPS.

2.Allow a minimum distance of 10 cm in the rear and two sides of the UPS for

ventilation.

4.Keep the UPS far away from heat emitting sources.

6.Do not expose it to corrosive gas.

7.Ambient temperature : 0℃- 40℃

2.3 Installation

1. Connect the UPS system only to an earthed shockproof socket outlet.

2. Do not connect domestic appliances such as hair dryers or office equipment

which would overload the UPS system (e.g. laser printers) to UPS output

sockets.

3. Place cables in such a way that no one can step on or trip over them.

2.4 Operation

1. Do not disconnect the mains cable on the UPS system or the building wiring

socket outlet during operations since this would cancel the protective

earthing of the UPS system and of all connected loads.

2. The UPS has its own internal power source (batteries). The output terminals

may be live even when the UPS is not connected to theAC supply.

3. Ensure that no fluids or other foreign objects can enter the UPS system.

2.5 Maintenance and Service

1. Caution - risk of electric shock.

Even after the unit is disconnected from the mains power supply (building

wiring socket outlet), components inside the UPS system are still connected

to the battery and are still electrically live and dangerous. Before carrying out

any kind of servicing and/or maintenance, disconnect the batteries and verify

that no current is present.

2. Only persons adequately familiar with batteries and with the required

precautionary measures may exchange batteries and supervise operations.

Unauthorised persons must be kept well away from the batteries.

3. Batteries may cause electric shock and have a high short-circuit current.

Please take the precautionary measures specified below and any other

measures necessary when working with batteries:

- remove wristwatches, rings and other metal objects

- use only tools with insulated grips and handles.

4. When changing batteries, install the same number and same type of

batteries.

5. Do not attempt to dispose of batteries by burning them. This could cause

battery explosion.

6. Do not open or destroy batteries. Escaping electrolyte can cause injury to

the skin and eyes.

3. SYSTEM DESCRIPTION

3.1 LCD Display(Includes detachable LCD function with connecting from

remote control port to RS-232)

1. LCD Display: This indicates the UPS operation information, including UPS

status, input/output voltage, input/output frequency, battery voltage,

battery capacity left, output load, inside temperature, and the times of

history events.

2. LCD Select Up-key: It is pressed to select upward the UPS status on LCD

Display.

3. LCD Select Down-key: It is pressed to select downward the UPS status on

LCD Display. When UPS is in operation press this key and the LCD Select

Up-key simultaneously for 3 seconds, the UPS will be switched off after

two beeps.

4. Control Key: When this key is pressed with the LCD Select Down-key

simultaneously for 3 seconds, the UPS will be switched on after two beeps.

Similarly. Beside, in battery operation mode, press both of this key and

LCD Select Up-key at the same time to disable the buzzer.

5. Fault LED (red): To indicate the UPS is in fault condition because of

inverter shutdown or over-temperature.

6. Warning LED (yellow): To indicate the UPS is in the status of overload,

bypass and battery back-up.

7. Normal LED (green): To indicate the UPS is operating normally.

3.2 LED Display

1. Line LED (green): To indicate the AC power is applied to the UPS input.

In case this LED blinks, it means the main AC source is out of tolerance.

2. Bypass LED (yellow): To indicate the load is powered via the bypass.

3. Battery LED (yellow): To indicate the UPS is in battery backup mode

when the mains power has failed.

4. Inverter LED (green): To indicate the UPS is powered through inverter.

5~9. Load & Battery Capacity LEDs:

(a) No. 5 to 8 LED is green color and No. 9 (used as warning LED for

overload or battery low) is yellow.

(b) These LEDs show the load % of the UPS if the mains power is

available (in normal operation). LEDs light up to indicate the

following information.

No. 5 LED: 0-35 % No. 5&6&7&8 LEDs: 76-95 %

No. 5&6 LEDs: 36-55 % No. 5&6&7&8&9 LEDs: 96-105%

No. 5&6&7 LEDs: 56-75 %

batteries. LEDs light up to indicate the following information.

No. 9 LED: 0%-25 % (battery low level)

No. 8&9LEDs: 26%-50 % No. 6&7&8&9 LEDs: 76%-95 %

No. 7&8&9 LEDs: 51%-75 % No. 5&6&7&8&9 LEDs: 96-100 %

10. Fault LED (red): To indicate the UPS is in fault condition because of

inverter shutdown or over-temperature

11. On/Test/Mute key: It should be pressed with the control key (see the

following item 12) simultaneously to do UPS auto test and turn off the

buzzer when in battery operation.

12. Control Key:

(a) When this key is pressed with the On/Test/Mute key simultaneously

for 3 seconds, the UPS will be switched on after two beeps.

(b) When UPS is in operation, press this key and On/Test/Mute/ key

simultaneously, the UPS will do auto battery test. And the Battery LED

will blink if the battery may have problem. Besides, in battery operation

(buzzer beeps), press this key and the On/Test/Mute key at the same

time to disable the buzzer.

simultaneously for 3 seconds, the UPS will be switched off after two

beeps

13. Off key: It should be pressed with the control key (see the above item 12)

simultaneously to switch off the UPS.

3.3 Outline Description

1KVA Tower Case

FRONT VIEW SIDE VIEW

BACK VIEW

2KVA / 3KVA Tower Case

3.4 Back View Description

1KVA Tower Case

1. DB 9 (RS-232) Interface Port 6. Fan

2. SNMP Intelligent Slot (Option) 7. External Battery Socket

3. Fax / Modem (Surge

Protection) 8. Breaker

4. Remote Control

(Detachable LCD Panel) 9. Input Socket

5. Output Socket (NEMA or IEC)

2KVA / 3KVA Tower Case

1. DB 9 (RS-232) Interface Port 7. External Battery Socket

2. SNMP Intelligent Slot (Option) 8. Fan

3. Fax / Modem (Surge Protection) 9 Breaker

4. Remote Control

(Detachable LCD Panel) 10. Input Terminal

5. Output Socket (NEMA or IEC)

6. Output Terminal

4. CABLE CONNECTION

4.1 Inspection

1. The system may be installed and wired only by qualified electricians in

accordance with applicable safety regulations.

2. When installing the electrical wiring, please note the nominal amperage of

your incoming feeder.

3. Inspect the packaging carton and its contents for damage. Please inform

the transport agency immediately should you find signs of damage.

Please keep the packaging in a safe place for future use.

4. Please ensure that the incoming feeder is isolated and secured to prevent

it from being switched back on again.

4.2 Connection

1. UPS Input Connection

If the UPS is connected via the power cord, please use a proper socket

with protection against electric current, and pay attention to the capacity of

the socket.

2. UPS Output Connection

The output of this model is with socket-types only (NEMAor IEC). Simply

plug the load power cord to the output sockets to complete connection.

5. OPERATION

5.1 Check Prior to Start Up

1. Ensure the UPS is in a suitable positioning.

2. Check input cord is secured.

3. Make sure the load is disconnected or in the “OFF” position.

4. Check if input voltage meets the UPS rating required.

5.2 Operation Procedure

Please follow the instructions below for the UPS operation.

1. Once the AC source is connected, the

LCD Display shall light up immediately

to display first the main menu of

greeting context and the Normal LED is

blinking to indicate ready to switch on

the inverter.

2. By pressing the UPS on/off Control Key and the LCD Select Down-key

simultaneously for 3 seconds until the buzzer beeps twice, the UPS will

start up and Normal LED lights up to indicate the power is from its inverter

to the load.

3. When the LCD Select Down-key and the LCD Select Up-key are pressed

simultaneously for 3 seconds until the buzzer beeps twice, the inverter will

be turned off and the UPS is on the standby status (LCD display illuminates

and Normal LED is blinking) until AC source is disconnected.

5.3 Storage Instruction

Disconnect input power in rear panel if you will not use it for long period. If the

UPS is stored over 3 months, please keep supplying power to the UPS for at

least 24 hours to ensure battery fully recharged.

5.4 LCD Display

Use Up/Down key to select menu-displays of the LCD described below. This

screen will refresh once the system power is enabled.

1. Rated Spec Menu

2. Status Menu

3. Voltage Menu

4. Frequency Menu

5. Battery Status Menu

6. Output Power Menu

7. Temperature Menu

8. History Record Menu

9. Bypass Range Set Menu

A. To protect the load, the function

of bypass auto-transfer is

activated only when the AC main

voltage is within the range of LO

(low) and HI(high). In this screen,

press on/off Control Key to enter

the following steps for LO/HI

voltage setting.

B. The cursor (→) will pop up to

indicate the item newly selected.

Press on/off Control Key to get

the item of LO or HI range the

user want to adjust.

C. Use Up or Down-key to adjust

the voltage (changing 1V by

every press). LO (low

rang):176V+/- 20V, HI(high

range):253V+/- 20V).

D. Once the value is confirmed,

press on/off Control Key again to

save the data.

10. Output Voltage Set Menu

A. In this screen, press on/off

Control Key to enter the following

steps for output voltage setting.

B. The cursor (→) will pop up to

indicate the output voltage newly

selected.

C. Use Up or Down-key to adjust

the output voltage (220V, 230V,

and 240V are available only).

D. Once the correct voltage is

selected, press on/off Control

Key again to save the data.

6. TROUBLE SHOOTING GUIDE

6.1 UPS Status and Action

The description of the following guideline may be helpful in problem solving.

1. LED and LCD status as below:

UPS STATUS:

AC utility power is normal. UPS is running normally, but battery

capacity is low (referring to Battery Status Menu). Buzzer beeps once

every second for battery low.

ACTION: Charger may broke down. Please replace charger board.

2. LED and LCD status as below:

UPS STATUS:

AC utility power is normal. The output load is supplied through bypass

of AC utility. Fault LED lits up and buzzer beeps continuously.

ACTION: Please contact your agent for service.

3. LED and LCD status as below:

UPS STATUS:

AC utility power is normal but UPS is overloaded. Warning LED lits up

and buzzer beeps per second.

ACTION: Please reduce the critical load to POWER(%)<100%.

4. LED and LCD status as below:

UPS STATUS:

AC utility power is normal but UPS is overloaded up to 125%. Warning

LED does not fade out and buzzer beeps per 0.5 second.

ACTION: Please reduce the critical load to POWER(%)<100%.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PowerWalker UPS

PowerWalker

PowerWalker 6000C LCD Manuel utilisateur

PowerWalker

PowerWalker 1000 LCD/UK Manuel utilisateur

PowerWalker

PowerWalker VI 400 Manuel utilisateur

PowerWalker

PowerWalker VI THID Series Manuel utilisateur

PowerWalker

PowerWalker VFI 1000 CRS Manuel utilisateur

PowerWalker

PowerWalker VFI 6000 TGB Manuel utilisateur

PowerWalker

PowerWalker VFI 6000 CG PF1 Manuel d'installation et d'exploitation

PowerWalker

PowerWalker VI 500 R1U Manuel utilisateur

PowerWalker

PowerWalker VFI 10000CP 3/3 Manuel utilisateur

PowerWalker

PowerWalker VFI CG PF1 Series Manuel utilisateur

PowerWalker

PowerWalker VI CW Series Manuel utilisateur

PowerWalker

PowerWalker VFI 10000P/RT LCD Manuel utilisateur

PowerWalker

PowerWalker VFI 1000 RMG PF1 Manuel utilisateur

PowerWalker

PowerWalker VFD 600 APFC Manuel utilisateur

PowerWalker

PowerWalker 1000 LCD/UK Manuel utilisateur

PowerWalker

PowerWalker VFD 400 IEC Manuel utilisateur

PowerWalker

PowerWalker VI 1200 RLE Manuel utilisateur

PowerWalker

PowerWalker VFI 1000RM Manuel utilisateur

PowerWalker

PowerWalker VI 400 SE Manuel utilisateur

PowerWalker

PowerWalker VFI 1000 AT Manuel utilisateur

PowerWalker

PowerWalker VI 650 GX Manuel utilisateur

PowerWalker

PowerWalker VFI 2000 CRM Manuel utilisateur

PowerWalker

PowerWalker VFI 6000RT LCD Manuel utilisateur

PowerWalker

PowerWalker 650 SH Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur