PEERLESS WMJ 018 Mode d’emploi

ISSUED: 5-19-95 SHEET #: 128-9003-8 08-04-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 3

Installation and Assembly - Wall Arm for Jumbo Mounts

Before you start make sure all parts shown

below are included with your bracket.

For use only to support Jumbo Mount TV Brackets or

other products as specified by Peerless. Combine only

as specified (see specifications below).

Note: Read entire instruction sheet before

you start installation and assembly.

For customer service

call 1-800-729-0307

or 708-865-8870.

Wall Arms include #14 x 2.5" wood screws. For attachment to solid

concrete, cinder block, or brick order accessory kit ACC 204 (wood screw

included with ACC 204 for mounts WMJ018 and WMJ022). For concrete

block and solid concrete a CB type arm is recommended.

Flush

Mount

Tube A

From the top thread the Flush Mount Tube

(included with your Jumbo Mount Bracket)

through threaded fitting in wall arm (A).

Note:If you are installing to a metal stud

wall, please refer to the accompanying metal

stud instruction sheet.

Models:

WMJ 018,

WMJ 022

This product is intended for use with UL

Listed products and must be installed by a

qualified professional installer.

WMJ 018 WMJ 022

Description Qty. Part # Part #

Awall arm 1 128-1059 128-1069

B#14 x 2.5" wood screw 3 5S1-015-C03 5S1-015-C03

Parts List

125 lb

Reach

18"

22.5"

(457 mm)

(572 mm)

(56.7 kg)

(68 kg)

150 lb

Concrete Wood

Model

Number

WMJ 018

WMJ 022

Max. Load Capacity Reach

Compatible Jumbo Mount Models

JM 2630, JM 2640, JM 2640D

JM 2630, JM 2640, JM 2640D, JM

2650, JM 2650D, JM 2655

WALL ARM FOR JUMBO MOUNTS - SPECIFICATIONS

• Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and

hardware.

• Do not attach directly to a metal stud wall. Use of a WSP wall plate is required for attachment to metal studs (contact

customer care). Metal stud installation is not UL evaluated.

• Weight of TV or screen shall not exceed maximum load capacity.

• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

WARNING

ISSUED: 5-19-95 SHEET #: 128-9003-8 08-04-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 3

For Wood Stud Walls drill three 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm) into stud center.

Attach wall arm using three #14 x 2.5" wood screws (B).

• Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the

screws, greatly reducing their holding power.

• Never tighten in excess of 80 in. • lb (9 N.M.).

• Make sure that mounting screws are anchored into the center of the studs. The use of an "edge to edge" stud finder is

highly recommended.

WARNING

ISSUED: 5-19-95 SHEET #: 128-9003-8 08-04-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

3 of 3

For Concrete Walls Order ACC 204 drill four 1/4"

(6 mm) dia. holes to a minimum depth of 2.5" (64

mm). Attach using concrete expansion anchors as

shown in 1, 2, and 3 (right).

• When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete

surface in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part

of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifications. It is

suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid

breaking out the back of the hole when entering a void or cavity.

• Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard-

ware and components.

WARNING

wall bracket

Drill holes and insert anchors.

Place wall plate over anchors and secure with screws.

concrete

surface

Tighten all fasteners.

anchor

• Concrete anchors are not intended for attachment to

concrete wall covered with a layer of plaster, drywall,

or other finishing material. If mounting to concrete wall

covered with plaster/drywall is unavoidable, plaster/

drywall (up to 5/8" thick) must be counterbored. If

plaster/drywall is thicker than 5/8", custom fasteners

must be supplied by installer.

• Tighten wood screws firmly, but do not overtighten.

Overtightening can damage the bolts, greatly reducing

their holding power.

• Never tighten in excess of 80 in. • lb (9 N.M.).

WARNING

CUTAWAY VIEW

Concrete anchor

(ACC 204)

All other brand and product names are trademarks or registered trademarks of their respective owners.

Ce manuel convient aux modèles suivants

Autres manuels PEERLESS Support et étagère

PEERLESS

PEERLESS SAL730P Mode d’emploi

PEERLESS

PEERLESS Solid-Point PLB 1 Mode d’emploi

PEERLESS

PEERLESS SOLID POINT PLCM 1 Mode d’emploi

PEERLESS

PEERLESS DST940 Mode d’emploi

PEERLESS

PEERLESS FPZ-655 Mode d’emploi

PEERLESS

PEERLESS HCW201 Manuel utilisateur

PEERLESS

PEERLESS SmartMount ST 630P Mode d’emploi

PEERLESS

PEERLESS LCT Series Mode d’emploi

PEERLESS

PEERLESS SR1G Mode d’emploi

PEERLESS

PEERLESS SR1G Mode d’emploi

PEERLESS

PEERLESS SF630-AB Mode d’emploi

PEERLESS

PEERLESS PTT188743 Series Manuel utilisateur

PEERLESS

PEERLESS PARAMOUNT PF640 Mode d’emploi

PEERLESS

PEERLESS SA761PU Mode d’emploi

PEERLESS

PEERLESS SA761P Mode d’emploi

PEERLESS

PEERLESS Paramount PT650 Mode d’emploi

PEERLESS

PEERLESS SmartMount D-FPF-320 Mode d’emploi

PEERLESS

PEERLESS SGLS01 Manuel utilisateur

PEERLESS

PEERLESS SmartMount ST 635 Mode d’emploi

PEERLESS

PEERLESS FPZ-600 Mode d’emploi

PEERLESS

PEERLESS ACC605 Mode d’emploi

PEERLESS

PEERLESS DS246 Mode d’emploi

PEERLESS

PEERLESS HCACC502 Manuel utilisateur

PEERLESS

PEERLESS MSA-301 Mode d’emploi

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur