PEERLESS PLCM 3 Mode d’emploi

ISSUED: 03-05-09 SHEET #: 202-9343-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

1 of 5

Read instruction sheet before you start installation and assembly.

Model:PLCM 3

Installation and Assembly -Column Mount for 12" - 22" for

Flat Panel Screens

• Installermustverifythat thesupporting surfacewill

safelysupport thecombinedweight ofall attached

equipmentandhardware.

WARNING

Max Load Capacity: 225 lb (102.3 kg)

ISSUED: 03-05-09 SHEET #: 202-9343-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

2 of 5

Note: Some parts may not appear exactly as illustrated.

Fasteners

Description Qt

Part #

Aceiling arm box 1 201-1666

Btilt bracket 1 200-1667

Dretaining collar 1 1800-375

EM5 x .8 x 10 mm penta-pin™ screw 4 505-9010

F2.875 OD x 2.125 ID x .062 H fiber washer 1 540-9432

GM10 x 1.5 x 15 mm penta-pin screw 4 520-9263

HM10 x 2" penta-pin tool 1 520-9260

IM5 x 1" penta-pin tool 1 520-9249

JM4 x .7 x 12 mm phillips screw 4 504-9013

Before you begin, make sure all parts shown are included with your product.

PARTS LIST

ISSUED: 03-05-09 SHEET #: 202-9343-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

3 of 5

ceiling plate (not included)

Threadsupport pipe (schedule40 pipe,1.5 x11.5NPT, notincluded) intothreaded fitting inceiling plate

(ULListed CMJ470,not included).Tighten- fouror fivecompleteturns -leaving slotalignedwithonesmall holein

the side of the ceiling plate threaded fitting. Insert and tighten one M5 x .8 x 10 mm penta-pin screw (E) provided

with ceiling plate as shown. Use the M5 penta-pin tool (I) to tighten screw. BY HAND, insert four M10 x 1.5 x 15

mm penta-pin screws (G) into threaded holes in the sides of ceiling arm box (A). Leave approximately 1/4" of

exposedthread.Slide ceilingarmbox(A)andfiberwasher(F)ontoendof supportpipe.Threadretainingcollar (D)

onto threaded end of support pipe. Tighten - four or five complete turns. Slide ceiling arm box (A) down so that it

is on top of retaining collar (D). Insert and tighten one M5 x .8 x 10 mm penta-pin screw (E) into retaining collar (D)

as shown. Insert one M5 penta-pin screw (E) through the tab on the back of ceiling arm box (A). Use M5 penta-

pin tool (I) to tighten screw just enough to stabilize support pipe.

Note: UL Listed ADJ or EXT extension column series can be used in combination with, or in place of support

pipetoachievedifferentlengths.

1/4"

BACKOF CEILING

ARMBOX

support pipe (not included)

ISSUED: 03-05-09 SHEET #: 202-9343-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

4 of 5

Note:Screenandadapter

platemay appeardifferent

thanillustrated.

Using hole pattern for Vesa 75 x 75 shown in detail 1.

Attach tilt bracket (B) to screen using four

M4 x .7 x 12 mm phillips screws (J).

SCREEN

VESA 75 x 75 VESA 100 x 100

SCREEN

Detail 1

Using hole pattern for Vesa 100 x 100 shown in

detail 1.Attach tilt bracket (B) to screen using four

M4 x .7 x 12 mm phillips screws (J).

ISSUED: 03-05-09 SHEET #: 202-9343-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

5 of 5

Hang tilt bracket (B) onto ceiling arm box (A).Adjust tilt as desired and tighten four

M10 x 1.5 x 15 mm penta-pin screws (G) securely using M10 penta-pin tool (H).

• For a safe assembly be sure to fully tighten four

screws(G).

WARNING

Table des matières

Autres manuels PEERLESS Support et étagère

PEERLESS

PEERLESS WSP 420 Manuel utilisateur

PEERLESS

PEERLESS PLA 60-UNL Mode d’emploi

PEERLESS

PEERLESS Smartmount SA752PU Mode d’emploi

PEERLESS

PEERLESS SmartMount ST 635 Mode d’emploi

PEERLESS

PEERLESS Smartmount SA752P Mode d’emploi

PEERLESS

PEERLESS SP850-UNLP-GB Mode d’emploi

PEERLESS

PEERLESS Solid-Point PLB 1 Mode d’emploi

PEERLESS

PEERLESS ST 640 Mode d’emploi

PEERLESS

PEERLESS SOLID-POINT PLCM1CP Mode d’emploi

PEERLESS

PEERLESS RTLA-100 Mode d’emploi

PEERLESS

PEERLESS ACC517 Mode d’emploi

PEERLESS

PEERLESS PLA 50-UNL Mode d’emploi

PEERLESS

PEERLESS MIS 213 Mode d’emploi

PEERLESS

PEERLESS SA761PU Mode d’emploi

PEERLESS

PEERLESS SlimLine MOWV241/BK Manuel utilisateur

PEERLESS

PEERLESS Solid-Point PLCM UN1 Mode d’emploi

PEERLESS

PEERLESS FPZ-655 Mode d’emploi

PEERLESS

PEERLESS HT642-002 Mode d’emploi

PEERLESS

PEERLESS WSP700 Mode d’emploi

PEERLESS

PEERLESS SAL730P Mode d’emploi

PEERLESS

PEERLESS Vision-Point LCV 100 Mode d’emploi

PEERLESS

PEERLESS Perfect Mount PMF2X2 Manuel utilisateur

PEERLESS

PEERLESS CMJ450 Mode d’emploi

PEERLESS

PEERLESS PARAMOUNT PA740 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur