Paradyne Hotwire 8784 Manuel utilisateur

Hotwire®8784 TDM SDSL

Termination Unit

with DSX-1 Interface

User’s Guide

Document No. 8784-A2-GB20-30

February 2001

AFebruary 2001 8784-A2-GB20-30

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or

by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express

written permission of Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for a particular purpose. Further, Paradyne Corporation

reserves the right to revise this publication and to make changes from time to time in the contents hereof without

obligation of Paradyne Corporation to notify any person of such revision or changes.

Changes and enhancements to the product and to the information herein will be documented and issued as a new

release to this manual.

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor directly for any help needed. For additional

information concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or

Paradyne worldwide office locations, use one of the following methods:



Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty

at www.paradyne.com/warranty.)



Telephone: Call our automated system to receive current information by fax or to speak with a company

representative.

—Within the U.S.A., call 1-800-870-2221

—Outside the U.S.A., call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail them to Technical Publications,

Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773, or send e-mail to userdoc@paradyne.com. Include the

number and title of this document in your correspondence. Please include your name and phone number if you are

willing to provide additional clarification.

Trademarks

ACCULINK, COMSPHERE, FrameSaver, Hotwire, MVL, NextEDGE, OpenLane, and Performance Wizard are

registered trademarks of Paradyne Corporation. ReachDSL and TruePut are trademarks of Paradyne Corporation. All

other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered

service marks of their respective owners.

8784-A2-GB20-30 February 2001 B

Important Safety Instructions

1. Read and follow all warning notices and instructions marked on the product or included in the manual.

2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to

protect it from overheating, these slots and openings must not be blocked or covered.

3. Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power

cord.

4. Do not attempt to install or service this product yourself, as opening or removing covers may expose you to

dangerous high voltage points or other risks. Refer all installation and servicing to qualified service personnel.

5. General purpose cables are provided with this product. Special cables, which may be required by the regulatory

inspection authority for the installation site, are the responsibility of the customer.

6. When installed in the final configuration, the product must comply with the applicable Safety Standards and

regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory

agencies and inspection authorities to ensure compliance.

7. A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products

installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition.

Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary,

implement corrective action prior to interconnecting the products.

8. In addition, if the equipment is to be used with telecommunications circuits, take the following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the

network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

CFebruary 2001 8784-A2-GB20-30

EMI Notices

UNITED STATES – EMI NOTICE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

The authority to operate this equipment is conditioned by the requirements that no modifications will be

made to the equipment unless the changes or modifications are expressly approved by Paradyne

Corporation.

CANADA – EMI NOTICE:

This Class A digital apparatus meets all requirements of the Canadian interference-causing equipment

regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le matérial

brouilleur du Canada.

8784-A2-GB20-30 February 2001 i

Contents

About This Guide



Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . v



Document Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v



Product-Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 About the Hotwire 8784 Termination Unit



TDM SDSL Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1



Hotwire 8784 Termination Unit Features . . . . . . . . . . . . . . . . . . . . . . . 1-2



Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3



SNMP Management Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Management Information Base (MIB) Support . . . . . . . . . . . . . . . 1-4

SNMP Trap Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

2 Using the Asynchronous Terminal Interface



User Interface Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1



Management Serial Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1



Logging In to the Hotwire DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2



Initiating an ATI Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2



Menu Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4



Screen Work Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5



Navigating the Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Keyboard Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Switching Between Screen Work Areas . . . . . . . . . . . . . . . . . . . . 2-8



Ending an ATI Session. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9



Exiting From the DSLAM Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Contents

ii February 2001 8784-A2-GB20-30

3 Initial Startup and Configuration



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1



Entering Identity Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2



Configuring the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Current and Default Factory Configurations . . . . . . . . . . . . . . . . . 3-4

Configuration Loader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5



Saving Configuration Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7



Downloading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8



AutoRate Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Disabling AutoRate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Resetting AutoRate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11



Restoring Access to the User Interface . . . . . . . . . . . . . . . . . . . . . . . . 3-11



Resetting the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

4 Monitoring the Unit



What to Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1



Viewing System and Test Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Health and Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Self-Test Results Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Test Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5



Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Viewing Network Error Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Viewing Network Performance Statistics. . . . . . . . . . . . . . . . . . . . 4-8

Viewing Current Network Performance . . . . . . . . . . . . . . . . . . . . . 4-10

Viewing DSX-1 Performance Statistics . . . . . . . . . . . . . . . . . . . . . 4-11



Viewing LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13



Front Panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Contents

8784-A2-GB20-30 February 2001 iii

5Testing



Accessing the Test Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1



Running Network Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Repeater Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

DTE Loopback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Remote Send Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Send and Monitor 511 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7



Device Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Lamp Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8



Ending an Active Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9



Telco-Initiated Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Telco-Initiated Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Telco-Initiated Payload Loopback . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Telco-Initiated Remote Line Loopback . . . . . . . . . . . . . . . . . . . . . 5-11

6 Messages and Troubleshooting



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1



Configuring SNMP Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2



Device Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3



Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

7 Security



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1



ATI Access Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1



Creating a Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2



Deleting a Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3



Controlling SNMP Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Assigning SNMP Community Names and Access Types . . . . . . . 7-4

Limiting SNMP Access through the IP Addresses of

the Managers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

8 IP Addressing



Selecting an IP Addressing Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Configurations Not Running IP Conservative Software. . . . . . . . . 8-1

All Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1



IP Addressing Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Contents

iv February 2001 8784-A2-GB20-30

A Configuration Options



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1



Network Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2



DSX-1 Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4



Copy Ports Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7



System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8



Management and Communication Menu . . . . . . . . . . . . . . . . . . . . . . . A-10

Telnet Session Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

General SNMP Management Options. . . . . . . . . . . . . . . . . . . . . . A-12

SNMP NMS Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14

SNMP Trap Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

B Standards Compliance for SNMP Traps



SNMP Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

warmStart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

authenticationFailure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

linkUp and linkDown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2



Enterprise-Specific Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

C Connector Pin Assignments



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1



Front Panel 50-pin DTE Connector Pinouts. . . . . . . . . . . . . . . . . . . . . C-1

D Technical Specifications

Glossary

Index

8784-A2-GB20-30 February 2001 v

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate the

2-port Hotwire 8784 Time Division Multiplexer Symmetric Digital Subscriber Line

(TDM SDSL) Termination Unit, and is intended for installers and operators.

Document Summary

Section Description

Chapter 1,

About the Hotwire

8784 Termination Unit

Describes the Hotwire 8784 Termination Unit’s

features and capabilities.

Chapter 2,

Using the

Asynchronous Terminal Interface

Provides instructions for accessing the user interface

and navigating the screens.

Chapter 3,

Initial Startup and

Configuration

Provides procedures for configuring the unit.

Chapter 4,

Monitoring the Unit

Describes using the LEDs, status, and network

statistics to monitor the unit.

Chapter 5,

Testing

Provides information about available tests and test

setup.

Chapter 6,

Messages and

Troubleshooting

Provides information on SNMP traps, device

messages, and troubleshooting.

Chapter 7,

Security

Presents procedures for creating a login, setting the

effective access levels, and controlling SNMP

access.

Chapter 8,

IP Addressing

Provides information and examples regarding IP

addresses.

Appendix A,

Configuration

Options

Contains all configuration options, default settings,

and possible settings.

Appendix B,

Standards

Compliance for SNMP Traps

Contains SNMP trap compliance information.

Appendix C,

Connector Pin

Assignments

Lists the pin assignments for the front panel DTE

connector.

About This Guide

vi February 2001 8784-A2-GB20-30

Product-Related Documents

Contact your sales or service representative to order additional product

documentation.

Paradyne documents are also available on the World Wide Web at

www.paradyne.com. Select

Library

→

Technical Manuals.

Appendix D,

Technical

Specifications

Contains physical and regulatory specifications,

network and port interfaces, power consumption

values, and accessory part numbers.

Glossary

Defines acronyms and terms used in this document.

Index

Lists key terms, acronyms, concepts, and sections in

alphabetical order.

Section Description

Document Number Document Title

7970-A2-GB20

Hotwire TDM SDSL Standalone Termination Units,

Models 7974, 7975, 7976, 7984, 7985, and 7986,

User’s Guide

8000-A2-GB22

Hotwire Management Communications Controller (MCC)

Card, IP Conservative, User’s Guide

8000-A2-GB29

Hotwire Management Communications Controller (MCC)

Card User’s Guide

8600-A2-GN20

Hotwire 8600 Digital Subscriber Line Access Multiplexer

(DSLAM) Installation Guide

8610-A2-GN10

Hotwire 8610 DSLAM Installation Instructions

8620-A2-GN20

Hotwire 8620 GranDSLAM Installation Guide

8784-A2-GZ40

Hotwire 8784 TDM SDSL Termination Unit,

with DSX-1 Interface, Installation Instructions

8800-A2-GN21

Hotwire 8800 Digital Subscriber Line Access Multiplexer

(DSLAM) Installation Guide

8810-A2-GN11

Hotwire 8810 DSLAM Installation Instructions

8820-A2-GN20

Hotwire 8820 GranDSLAM Installation Guide

Autres manuels pour Hotwire 8784

Table des matières

Autres manuels Paradyne Matériel réseau

Paradyne

Paradyne HotWire 7924 Manuel utilisateur

Paradyne

Paradyne Hotwire 6210 Instructions d'utilisation d'origine

Paradyne

Paradyne COMSPHERE 6700 Series Manuel utilisateur

Paradyne

Paradyne Hotwire 5100 Manuel utilisateur

Paradyne

Paradyne SMD2000-24E Manuel utilisateur

Paradyne

Paradyne 3151 Manuel technique

Paradyne

Paradyne JetFusion 2208 Manuel utilisateur

Paradyne

Paradyne 7510-A2-GB20-00 727 Manuel utilisateur

Paradyne

Paradyne 4929 DSLAM Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3610 Manuel

Paradyne

Paradyne Hotwire 5216 Manuel utilisateur

Paradyne

Paradyne Compshere 3000 Series Manuel d'exploitation et d'entretien

Paradyne

Paradyne ACCULINK 3151 CSU Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3550 Series Manuel utilisateur

Paradyne

Paradyne Hotwire 8775 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3610 Guide de l'utilisateur

Paradyne

Paradyne COMSPHERE 3800 Series Mode d’emploi

Paradyne

Paradyne 3163 Manuel utilisateur

Paradyne

Paradyne ACCULINK 3163 DSU Manuel utilisateur

Paradyne

Paradyne Hotwire 7995 Manuel utilisateur

Paradyne

Paradyne 8310 MVLt Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 Manuel utilisateur

Paradyne

Paradyne Single T1 Network Access Module (NAM)... Manuel utilisateur

Paradyne

Paradyne SLV Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur