Paradyne 3172 Manuel

You have accessed an older version of a

Paradyne product document.

Paradyne is no longer a subsidiary of

AT&T. Any reference to AT&T Paradyne

is amended to read Paradyne

Corporation.

AREA CODE CHANGE

Please note that the area code for

Paradyne Corporation in Largo, Florida

has changed from 813 to 727.

For any Paradyne telephone number that

appears in this manual with an 813 area

code, dial 727 instead.

March 1996

ACCULINK

317x E1 Data Service Unit/

Channel Service Unit

Operator’s Guide

Document No. 3170-A2-GB20-10

dyn

Printed on recycled paper

ACCULINK 317x E1 DSU/CSU

AMarch 1996 3170-A2-GB20-10

ACCULINK

317x E1 Data Service Unit/Channel Service Unit

Operator’s Guide

3170-A2-GB20-10

2nd Edition (March 1996)

Changes and enhancements to the product and to the information herein will be documented and issued as a new release.

Trademarks

All products and services mentioned herein are the trademarks, service marks, registered trademarks or registered service

marks of their respective owners.

Thispublicationisprotectedby federalcopyrightlaw.Nopartof thispublicationmaybe copiedordistributed,transmitted, transcribed,storedina retrievalsystem,

ortranslatedintoanyhumanorcomputerlanguageinanyformorbyanymeans,electronic,mechanical,magnetic,manualorotherwise,ordisclosedtothirdparties

without the express written permission of AT&T Paradyne Corporation, 8545 126th Avenue North, P.O. Box 2826, Largo, Florida 34649-2826.

AT&T Paradyne Corporation makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for a particular purpose. Further, AT&T Paradyne Corporation reserves the right to revise this publication and to make changes from

time to time in the contents hereof without obligation of AT&T Paradyne Corporation to notify any person of such revision or changes.

Important Instructions

B3170-A2-GB20-10 March 1996

Important Safety Instructions

1. Read and follow all warning notices and instructions marked on the product or included in the

manual.

2. When an ac power source is used, this product is intended to be used with a three-wire

grounding type plug – a plug which has a grounding pin. This is a safety feature. Equipment

grounding is vital to ensure safe operation. Do not defeat the purpose of the grounding type

plug by modifying the plug or using an adapter.

Prior to installation, use an outlet tester or a voltmeter to check the ac receptacle for the

presence of earth ground. If the receptacle is not properly grounded, the installation must not

continue until a qualified electrician has corrected the problem.

If a three-wire grounding type power source is not available, consult a qualified electrician to

determine another method of grounding the equipment.

3. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of

the product and to protect it from overheating, these slots and openings must not be blocked

or covered.

4. Do not allow anything to rest on the power cord and do not locate the product where persons

will walk on the power cord.

5. Do not attempt to service this product yourself, as opening or removing covers may expose

you to dangerous high voltage points or other risks. Refer all servicing to qualified service

personnel.

6. General purpose cables may be provided with this product. Special cables, which may be

required by the regulatory inspection authority for the installation site, are the responsibility

of the customer.

7. When installed in the final configuration, the product must comply with the applicable Safety

Standards and regulatory requirements of the country in which it is installed. If necessary,

consult with the appropriate regulatory agencies and inspection authorities to ensure

compliance.

8. A rare phenomenon can create a voltage potential between the earth grounds of two or more

buildings. If products installed in separate buildings are interconnected, the voltage potential

may cause a hazardous condition. Consult a qualified electrical consultant to determine

whether or not this phenomenon exists and, if necessary, implement corrective action prior to

interconnecting the products.

9. Input power to the ac voltage configuration of this product must be provided by one of the

following: (1) a UL Listed/CSA certified power source with a Class 2 or Limited Power

Source (LPS) output for use in North America, or (2) a certified power source with a Safety

Extra Low Voltage (SELV) output for use in the country of installation.

Input power to the dc voltage configurations of this product must be provided by one of the

following: (1) a National Electric Code (NEC)/Canadian Electric Code (CEC) Class 2 circuit

for use in North America, or (2) a certified Safety Extra Low Voltage (SELV) circuit input for

use in the country of installation.

ACCULINK 317x E1 DSU/CSU

CMarch 1996 3170-A2-GB20-10

In addition, if the equipment is to be used with telecommunications circuits, take the following

precautions:

– Never install telephone wiring during a lightning storm.

– Never install telephone jacks in wet locations unless the jack is specifically designed

for wet locations.

– Never touch uninsulated telephone wires or terminals unless the telephone line has

been disconnected at the network interface.

– Use caution when installing or modifying telephone lines.

– Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

– Do not use the telephone to report a gas leak in the vicinity of the leak.

Notices

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,

PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE

PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL

ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF

NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS

LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE

INTERFERENCE AT HIS OWN EXPENSE.

THE AUTHORITY TO OPERATE THIS EQUIPMENT IS CONDITIONED BY THE REQUIREMENTS THAT NO

MODIFICATIONS WILL BE MADETOTHE EQUIPMENTUNLESS THE CHANGES OR MODIFICATIONS ARE EXPRESSLY

APPROVED BY AT&T PARADYNE.

WARNING

TO USERS OF DIGITAL APPARATUS IN CANADA:

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING

EQUIPMENT REGULATIONS.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTES LES EXIGENCES DU RÉGLEMENT SUR LE

MATÉRIEL BROUILLEUR DU CANADA.

Important Instructions

D3170-A2-GB20-10 March 1996

CE Marking

Models 3172-A1-410 and 3174-A1-410 Only

Models 3172-A1-410 and 3174-A1-410 of this product are marked with the CE mark. This mark

has been affixed to demonstrate full compliance with the following European Directives:

•Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the

laws of the member states relating to electrical equipment designed for use within certain

voltage limits, as amended by Directive 93/68/EEC.

•Directive 89/336/EEC – Council Directive of 3 May 1989 on the approximation of the laws of

the member states relating to Electro-Magnetic Compatibility (EMC), as amended by

Directive 93/68/EEC.

•Directive 91/263/EEC – Council Directive of 29 April 1991 on the approximation of the laws

of the member states concerning telecommunication terminal equipment, including the mutual

recognition of their conformity, as amended by Directive 93/68/EEC. The application of this

directive is in relation only to network connection via the 120 ohm G.703 interface as

specified in CTR12.

ACCULINK 317x E1 DSU/CSU

EMarch 1996 3170-A2-GB20-10

Equipment Return

To return equipment within North America, prepare a memo and supply the following

information:

Your company

Company address

Contact name

Contact’s phone number

Billing address

Purchase order number associated with the equipment

RMA number

Brief description of the symptoms

Status of the equipment’s warranty

When returning equipment from outside of North America, also include the following

information on a separate invoice for customs purposes:

Distributor name and address

Model numbers and description

Current value of equipment

RMA number

Reason for return

Package the equipment carefully for shipping, including the memo containing the necessary

information, and send to the appropriate address below:

USA International

AT&T Paradyne Corporation AT&T Paradyne Corporation

Customer Support C/O Sack & Menendez Custom Brokers

Attn: Repair Center Customer Support

8545 126th Avenue North, Building G Attn: Repair Center

Largo, Florida 34649 8545 126th Avenue North, Building G

USA Largo, Florida 34649

USA

Make sure the RMA number is in a visible location on the outside of the shipping carton.

Out of Warranty

If your equipment is out of warranty and you do not have a maintenance support agreement,

factory repair support is available. Contact the AT&T Paradyne’s Repair Center using one of the

following numbers:

1-800-772-7691 (USA)

(813) 530-8690 (FAX)

+1 813 530-8099 (International)

Please have your purchase order number and the information listed in the Equipment Return

section ready when you call for your RMA number. The Repair Center will provide a quote of the

repair charge(s). When packaging the equipment, include a purchase order indicating the repair

cost quoted by the Repair Center. Send the equipment to the Repair Center as previously described.

Make sure the RMA number is in a visible location on the outside of the package.

i3170-A2-GB20-10 March 1996

Table of Contents

Preface

Objectives and Reader Assumptions iii. . . . . . . . . . . . . . . . . . . . . . . . .

Related Documents iii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference Documents iii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Introduction

Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Physical Description 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Installation

Overview 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Application Examples 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SNMP Connection Examples 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Important Instructions 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Optional Power Sources 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cabling Examples 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power-Up Self-Test 2-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Operation

Overview 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Front Panel 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Displaying Unit Identity 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Displaying LED Conditions 3-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting the DTE Drop/Insert or Data Port for LED Display 3-11. . . . .

Changing Configuration Options 3-11. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuring the E1 DSU/CSU for SNMP Management 3-14. . . . . . . . . .

Configuring SNMP Traps 3-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuring DS0 Channels 3-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Providing Backup Capability 3-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting the Timing Source 3-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Acquiring/Releasing the User Interface 3-35. . . . . . . . . . . . . . . . . . . . . . .

Resetting the E1 DSU/CSU 3-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download Operations 3-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ACCULINK 317x E1 DSU/CSU

ii March 1996 3170-A2-GB20-10

4. Maintenance

Overview 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Self-Test Health 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Device Health and Status 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Performance Reports 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Alarms 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SNMP Traps 4-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting 4-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Jacks 4-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Commands 4-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote Loopback Tests 4-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Local Loopback Tests 4-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Patterns 4-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lamp Test 4-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Displaying E1 DSU/CSU Test Status 4-24. . . . . . . . . . . . . . . . . . . . . . . .

Appendices

%"!' ! !( *                                   

! #'"!& *                               

"!(%'"! #'"!& *                                

! &&! !'& *                                     

  '& *                                  

 ')"% %&&! !%" *                       

%"!' !  ('"! *                               

$(# !' &' *                                      

Glossary

Index

iii3170-A2-GB20-10 March 1996

Preface

Objectives and Reader

Assumptions

This operator’s guide contains installation, operation,

and maintenance information for the ACCULINK 317x

E1 Data Service Unit (DSU)/Channel Service Unit (CSU).

It is assumed that you are familiar with the operation of

digital data communication equipment and DSUs and

CSUs in particular. You should also be familiar with

Simple Network Management Protocol (SNMP) if you

want your E1 DSU/CSU to be managed by an SNMP

manager.

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur