Panasonic Transistors 2SC3930G Manuel utilisateur

Transistors

Publication date: April 2007 SJC00357AED

This product complies with the RoHS Directive (EU 2002/95/EC).

2SC3930G

Silicon NPN epitaxial planar type

For high-frequency amplification

Complementary to 2SA1532G

■Features

•Optimum for RF amplification of FM/AM radios

•High transition frequency fT

•S-Mini type package, allowing downsizing of the equipment and

automatic insertion through the tape packing

■Absolute Maximum Ratings Ta=25°C

Parameter Symbol Rating Unit

Collector-base voltage (Emitter open) VCBO 30 V

Collector-emitter voltage (Base open) VCEO 20 V

Emitter-base voltage (Collector open) VEBO 5V

Collector current IC30 mA

Collector power dissipation PC150 mW

Junction temperature Tj150 °C

Storage temperature Tstg −55 to +150 °C

Parameter Symbol Conditions Min Typ Max Unit

Collector-base cutoff current (Emitter open)

ICBO VCB =10 V, IE=0 0.1 µA

Forward current transfer ratio *hFE VCB =10 V, IE=−1 mA 70 220 

Transition frequency fTVCB =10 V, IE=−1 mA, f =200 MHz 150 250 MHz

Noise figure NF VCB =10 V, IE=−1 mA, f =5 MHz 2.8 4.0 dB

Reverse transfer impedance Zrb VCB =10 V, IE=−1 mA, f =2 MHz 22 50 Ω

Reverse transfer capacitance Cre VCB =10 V, IE=−1 mA, f =10.7 MHz 0.9 1.5 pF

(Common emitter)

■Electrical Characteristics Ta=25°C ±3°C

Rank B C

hFE 70 to 140 110 to 220

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

2. *: Rank classification

■Package

•Code

SMini3-F2

•Marking Symbol: V

•Pin Name

1. Base

2. Emitter

3. Collector

2SC3930G

2SJC00357AED

This product complies with the RoHS Directive (EU 2002/95/EC).

IBVBE ICVBE VCE(sat) IC

PCTaICVCE ICIB

hFE ICfTIEZrb IE

0 16040 12080

200

160

120

Collector power dissipation PC(mW)

Ambient temperature Ta(°C)

018612

Ta=25°C

IB=100 µA

80 µA

60 µA

40 µA

20 µA

Collector current I

(mA)

Collector-emitter voltage V

(V)

0 1008020 6040

15.0

12.5

10.0

7.5

5.0

2.5

=10 V

=25°C

Base current I

(µA)

Collector current I

(mA)

0 1.00.80.2 0.60.4

120

100

VCE =10 V

Ta=25°C

Base-emitter voltage VBE (V)

Base current IB(µA)

0 2.01.60.4 1.20.8

=10 V

=75°C−25°C

25°C

Base-emitter voltage V

(V)

Collector current I

(mA)

0.1 1 10 100

0.01

0.1

100 I

/ I

=10

=75°C

25°C

−25°C

Collector-emitter saturation voltage V

CE(sat)

(V)

Collector current I

(mA)

0.1 1 10 100

240

200

160

120

VCE =10 V

Ta=75°C

25°C

−25°C

Forward current transfer ratio h

Collector current I

(mA)

−0.1 −1−10 −100

400

300

100

200

=10 V

f =100 MHz

=25°C

Transition frequency fT(MHz)

Emitter current IE(mA)

−0.1 −1−10

VCB =10 V

f =2 MHz

Ta=25°C

Reverse transfer impedance Zrb (Ω)

Emitter current IE(mA)

2SC3930G

SJC00357AED

This product complies with the RoHS Directive (EU 2002/95/EC).

Cre VCE GPIENF IE

bie gie bre gre bfe gfe

boe goe

0.1 1 10 100

3.0

2.5

2.0

1.5

1.0

0.5

f =10.7 MHz

=25°C

=3 mA

1 mA

Collector-emitter voltage VCE (V)

Reverse transfer capacitance C

(pF)

(Common emitter)

−0.1 −1−10 −100

=10 V

f =100 MHz

=25°C

Power gain G

(dB)

Emitter current I

(mA)

−0.1 −1−10

=6 V

f =100 MHz

=50 Ω

=25°C

Noise figure NF (dB)

Emitter current I

(mA)

0403282416

+ jb

=10 V

f =10.7 MHz

=−1 mA

−2 mA

−4 mA −7 mA

100

Input conductance g

(mS)

Input susceptance b

(mS)

−0.5 0−0.1−0.4 −0.2−0.3

−0.6

−0.1

−0.2

−0.3

−0.4

−0.5

+jb

=10 V

f =10.7 MHz

=−1 mA

100

Reverse transfer conductance gre (mS)

Reverse transfer susceptance b

(mS)

0 1008020 6040

−120

−20

−40

−60

−80

−100

+jb

=10 V

f =10.7 MHz

10.7

−0.1 mA

−1 mA

−2 mA

=−4 mA

100

Forward transfer conductance g

(mS)

Forward transfer susceptance b

(mS)

0 0.50.40.1 0.30.2

1.2

1.0

0.8

0.6

0.4

0.2

yoe =goe +jboe

VCE =10 V

f =10.7 MHz

IE=−1 mA

100

Output conductance g

(mS)

Output susceptance b

(mS)

This product complies with the RoHS Directive (EU 2002/95/EC).

SMini3-F2 Unit: mm

0.30 +0.05

−0.02

0.13 +0.05

−0.02

2.00 ±0.20

(0.89)

0.90 ±0.10

(0.65)(0.65)

1.30 ±0.10

1.25 ±0.10

2.10 ±0.10

0.425 ±0.050

(0.49)

0 to 0.10

(5°)

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Table des matières

Autres manuels Panasonic Matériel réseau

Panasonic

Panasonic K-NL408KT/G Manuel utilisateur

Panasonic

Panasonic PIN diodes MA27P110G Manuel utilisateur

Panasonic

Panasonic MGA-ML4TWPoE++ Manuel utilisateur

Panasonic

Panasonic k-nl304g Manuel utilisateur

Panasonic

Panasonic Switching Diodes MA2S101 Manuel utilisateur

Panasonic

Panasonic Transistor 2SC5378 Manuel utilisateur

Panasonic

Panasonic E series Manuel utilisateur

Panasonic

Panasonic PN261693D Manuel utilisateur

Panasonic

Panasonic Zener Diodes MAZ8xxxG Series Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3931G Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic Transistors 2SA0720 Manuel utilisateur

Panasonic

Panasonic Transistors 2SB1462J Manuel utilisateur

Panasonic

Panasonic Transistors 2SC4805G Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic Rectifier Diodes MA2J115 (MA115) Manuel utilisateur

Panasonic

Panasonic Transistors 2SC4562G Manuel utilisateur

Panasonic

Panasonic Switching Diodes MA2Z001 Manuel utilisateur

Panasonic

Panasonic Circuit Protector Elements UNHZ204 Manuel utilisateur

Panasonic

Panasonic Transistors 2SB1218G Manuel utilisateur

Panasonic

Panasonic GA-ML Series Manuel utilisateur

Panasonic

Panasonic Transistors 2SA1791J Manuel utilisateur

Panasonic

Panasonic Transistors 2SD1823 Manuel utilisateur

Panasonic

Panasonic Phototransistors PNA1803L Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur