Outback Omega 100 Manuel utilisateur
• For outdoor use only. Not for commercial use.
• Read instructions before using the appliance.Failure to follow instructions could
result in death, serious bodily injury, and/orproperty loss.
• Warning: accessible parts may be very hot. Keep young children away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
• Retain these instructions for future reference.
• Leak test your barbecue annually. Check the hose connections are tight and leak
testeach time you reconnectthe gas bottle.
• For Flare-up control please refer to the ‘OPERATION’ section of this manual.
Gas Barbecues
Assembly and Operating Instructions for
Outback® Omega 100, Omega 200, and Omega 300 Gas Barbecues
Photographs are not to scale.
Specifications subject to change
without prior notice.
WARNING
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use shall not be
stored in the vicinity of this or any other appliance.
0359
EN (Europe)
Omega100 Omega300Omega200
2
A. Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see the corresponding Hardware Reference Diagram for your barbecue model.
OUTBACK® OMEGA RANGE
CODE PART QTY OMEGA100 OMEGA200 OMEGA300
Body
Assembly
A1 Flame Tamer 1
A2 Burner 1
A3 Hood Handle 1
A4 Hood 1
A5 Body 1
A6 Grease Cup Holder 1
A7 Grease Cup 1
A8 Cooking Grill 1
A9 Gasket 8
A10 Upper Hinge Bracket 2
A11 Lower Hinge Bracket 2
A12 Gas Collector Box 1
A13 Main Electrode 1
A14 Warming Rack 1
Upper
Trolley
B1 Control Panel 1
B2 Igniter Button 1
B3 Knob 2
B4 Body Handle 1
B5 U-Bar 2
B6 Hose (if supplied)
B7 Plastic Side Shelf 2 1
B8 Side Burner Knob 1
B9 Side Burner Grid 1
B10 Side Burner Shelf 1
B11 Side Burner Head 1
B12 Side Burner Electrode 1
Lower
Trolley
C1 Short Leg 2
C2 Axle 2
C3 Wheel 2
C4 Hubcap 2
C5 Screen 1
C6 Long Support Rod 2
C7 Stopper 2
C8 Long Leg 2
C9 Short Support Rod 2
C10 Bottom Shelf 1
Hardware
D1 ST4.0x10 Screw 2
D2 M5x10 Bolt 2
D3 M6x15 Bolt 4
D4 M6x25 Bolt 4
D5 M6x30 Bolt 4
D6 M6x40 Bolt 8
D7 M6x50 Bolt 4
D8 Axle-Clip 2
D9 M6 Keps Nut 4 20 20
D10 Shelf Spacer 8
Pre-Assembled
Quantity and specification varies according to modelpurchased.
3
B1. Parts Diagram: Omega 100
Quantities vary according to model purchased. Specifications subject to change without prior notice.
For more details on hardware, please see ‘Hardware Reference Diagram: Omega 100.’
Pre-assembled body unit includes
the following individual parts:
A8
A1
A3
A2 A4 A5 A10 B1 B2
A11 A12 A13 A14
A6
A7
B5 B6
B4
C5
C6 C9
C4 C3
C1 C8
C7
B6
B3
C2
D8
4
B2. Hardware Reference Diagram: Omega 100
Specifications subject to change without prior notice.
C2
D8
D3 D7
D4, D9
D5
5
C1. Parts Diagram: Omega 200
Quantities vary according to model purchased. Specifications subject to change without prior notice.
For more details on hardware, please see ‘Hardware Reference Diagram: Omega 200.’
C10
C5C1 C8
C7
Pre-assembled body unit includes
the following individual parts:
A8
A1
A3
A2 A4 A5 A10 B1 B2
A11 A12 A13 A14
A6
A7
B5 B6
B6
B7
C6
B3
C4 C3 C2
D8
6
C2. Hardware Reference Diagram: Omega 200
Specifications subject to change without prior notice.
C2
D8
D4, D9
D5, D9
D6, D9, D10
D7, D9
7
D1. Parts Diagram: Omega 300
Quantities vary according to model purchased. Specifications subject to change without prior notice.
For more details on hardware, please see ‘Hardware Reference Diagram: Omega 300.’
C10
Pre-assembled body unit includes
the following individual parts:
A8
A1
A3
A2 A4 A5 A10 B1 B2
A11 A12 A13 A14
A6
A7
B6 B8
B6
B10
B11
B12
C5C1 C8
C7
B7
B3
B9
A15
B5
C4 C3 C2
D8
8
D2. Hardware Reference Diagram: Omega 300
Specifications subject to change without prior notice.
C2
D8
D4, D9
D5, D9
D6, D9, D10
D7, D9
9
E. Assembly
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Philips/crosspoint screwdriver, adjustable spanner or metric spanner set
Please lay out all nuts and bolts and check lengths before assembling.
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp
edges are present.
2
C1
C8
Warning: Care must be taken to ensure hood does not fall open unexpectedly.
1 Omega 100 Omega 200 Omega 300
Omega 100 Omega 200 Omega 300
10
NOTE: Ensure that the legs with the Velcro attached to them are at the front of the
barbecue.
C1
C8
D4
D9
D4
D9
D4
D9
D4
D9
3
4
Omega 100 Omega 200 Omega 300
Omega 100 Omega 200 Omega 300
Autres manuels pour Omega 100
5
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Outback Gril
Outback
Outback RG47F Manuel utilisateur
Outback
Outback Jupiter RS4491H Manuel utilisateur
Outback
Outback Comet Manuel utilisateur
Outback
Outback Trooper THG2302A Manuel utilisateur
Outback
Outback Ranger 3 Manuel utilisateur
Outback
Outback Meteor Select MS4431 Manuel utilisateur
Outback
Outback Gourmet 4 Manuel utilisateur
Outback
Outback Omega Charcoal 100 Manuel utilisateur
Outback
Outback TPA101-4 Manuel utilisateur
Outback
Outback THG3710SS-3 Manuel utilisateur
Outback
Outback Diamond Hooded Manuel utilisateur
Outback
Outback EX200T Manuel utilisateur
Outback
Outback Spectrum 2 Burner Manuel utilisateur
Outback
Outback Excel 310 Manuel utilisateur
Outback
Outback Excelsior 3 Manuel utilisateur
Outback
Outback Meteor 4S Manuel utilisateur
Outback
Outback CK578T Manuel utilisateur
Outback
Outback Orion Manuel utilisateur
Outback
Outback MS4464 Manuel utilisateur
Outback
Outback Spectrum 2 Burner Manuel utilisateur
