Outback Party FS5680A Manuel utilisateur
0359
Assembly and Operating Instructions for Outback®
Party 6 Burner Gas BBQ
Drawings are not to scale.
Specifications subject to change
without prior notice.
WARNING
For outdoor use only. Not for commercial use.
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children and pets away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
Retain these instructions for future reference.
Leak test annually, and whenever the gas bottle is removed or replaced. Check that
the hose connections are tight and leak test each time you reconnect the gas bottle.
For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use must not be
stored in the vicinity of this or any other
appliance.
FS5680A
2
CODE PART QTY Outback® Party 6 Burner
Gas BBQ
BODY
B1 Barbecue Body 1
B2 Burner 6
B3 Control Panel 1
B4 Knob 6
B5 Ignition Button 1
B6 Flame Tamer 6
B7 Cooking Grill 2
B8 Hose and Regulator Assembly 1
B9 Left Wind Shield 1
B10 Right Wind Shield 1
B11 Rear Wind Shield 1
TROLLEY
C1 Side Shelf Support 2
C2 Left Side Shelf 1
C3 Right Side Shelf 1
C4 Drip Tray 1
C5 Screen 1
C6 Trolley Assembly 1
C7 Axle 1
C8 Wheel 2
C9 Wheel Hubcap 2
C10 Lockable Caster 2
HARDWARE
D1 M6x12 Bolt 12
D2 M6 Wing Bolt 2
D3 Locknut 2
Pre-Assembled Component
Parts List
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
3
Parts Diagram
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
B6
B7
C2 C3
B10
B9
B11
B1 B2
B8
B5
B4
C1
C4
C5
C6
C7
C8C9 C10
B3
D3
4
Hardware Reference Diagram
Specifications subject to change without prior notice.
D1
M6x12 Bolt
D2
M6 Wing Bolt
5
Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
Remove any internal component or packaging from the barbecue body.
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Open the four latches as shown.
Carefully lift the Barbecue Body (B1) away from the Trolley Assembly (C6). and remove any
internal components or packaging from the Barbecue Body.
Carefully turn the Trolley Assembly (C6) upside-down.
Unscrew the Locknuts (D3) from both ends of the Axle (C7). Slide the axle through the
corresponding holes in the left legs. Slide the Wheels (C8) over each end of the axle. Secure the
wheels into place with the locknuts. Place the Wheel Hubcaps (C9) onto the outsides of the
wheels. Attach the Lockable Casters (C10) into the right legs as shown.
Latch
C8
D3 C9
C10
C7
6
3
4
Carefully turn the trolley assembly over right side-up. Unfold the trolley assembly as shown.
Attach one Side Shelf Support (C1) to the barbecue body using M6x12 Bolts (D1x6pcs) as
shown. Repeat above process for the other side shelf support.
Make sure the side shelf buffers face upward when attaching the side shelf support.
C1
D1
7
Carefully place the barbecue body assembly onto the trolley assembly, and fix with M6 Wing
Bolts (D2x2pcs). Then lock the four latches as shown.
Unlock the latch on the side shelves, and extend them to horizontal position.
Unfold the Wind Shields (B9, B10, B11) and secure them in position by in placing the locking
tabs on side wind shields into the slots in barbecue body.
5
6
B1
C6
D2
8
Lay the Flame Tamers(B6) carefully into the body ensuring it lies level within the body. Lay the
Cooking Grill (B7) into place.
NOTE: Ensure that the flame tamer lies directly underneath the grills.
7
8
Insert the Drip Tray (C4) by sliding it underneath the barbecue body.
B6
B7
C4
9
9
Attach the Screen (C5) to the front left/right legs as shown.
(Left view of the barbecue trolley)
C5
ASSEMBLY IS NOW COMPLETE.
10
Leak Testing
Always perform a leak test in a well-ventilated area.
Step 1 - Confirm all control knobs are in the off position.
Step 2 - Turn the gas on / open the gas control valve on the gas bottle or regulator.
Step 3 - Check for leaks by brushing a solution of ½ water and ½ liquid detergent / soap over all
the gas system joints, including gas bottle valve connections, hose connections, and regulator
connections.
Step 4 - NEVER USE AN OPEN FLAME to test for leaks at any time.
Step 5 - If bubbles form over any of the joints there is a leak
Turn off the gas supply at the gas bottle
Retighten all joints
Repeat test
If bubbles form again do not use the barbecue and contact your local distributor for assistance.
Always wipe the mixed solution (½ water and ½ liquid detergent / soap) from all joints and
connections after leak testing.
PROCEED TO THE NEXT PAGE FOR INSTRUCTIONS ON OPERATION AND
MAINTENANCE
ALL JOINTS AND CONNECTIONS MUST NOW BE LEAK TESTED BEFORE USING THE
BARBECUE.
Leak test annually, and whenever the gas bottle is removed or replaced.
Leak Test Diagram
1. Maximum diameter or breadth is 320mm.
2. Maximum height (regulator included) is 700mm.
2
1
Table des matières
Autres manuels Outback Gril
Outback
Outback THG3710SS-3 Manuel utilisateur
Outback
Outback MS4431A Manuel utilisateur
Outback
Outback Spectrum Flamer Manuel utilisateur
Outback
Outback RC4341PA Manuel utilisateur
Outback
Outback SG-930 Manuel utilisateur
Outback
Outback RS4491SC Manuel utilisateur
Outback
Outback Omega 100 Manuel utilisateur
Outback
Outback Sapphire THG3216AW Manuel utilisateur
Outback
Outback Meteor 3 Manuel utilisateur
Outback
Outback Trekker RG47B Manuel utilisateur
Outback
Outback Hunter Manuel utilisateur
Outback
Outback Spectrum Select Flat Bed 2 Manuel utilisateur
Outback
Outback Jupiter 4 Manuel utilisateur
Outback
Outback Comet Kettle K102 Manuel utilisateur
Outback
Outback Omega 200 Manuel utilisateur
Outback
Outback Excel 100 Manuel utilisateur
Outback
Outback Trooper Stainless Steel Manuel utilisateur
Outback
Outback Trekker Manuel utilisateur
Outback
Outback Meteor MT-H4461-3 Manuel utilisateur
Outback
Outback OUT371036 Manuel utilisateur
