NXP Semiconductors NTAG I2C plus Manuel d'utilisation et d'entretien

Document information

Info Content

Author Pavel Slamnik

Author Role Design Engineer

Keywords NTA I2C plus Explorer Kit OM5569-NT322E, RFID, NFC, TA , NTA

Hardware Manual: NTA I2C plus Explorer

Kit OM5569/NT322E

Doc Rev 1.00 Approved — 2015.09.01 BL ID

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

Revision History

Revision Date Description Author

1.01 2015.12.07 First Version Pavel Slamnik

The information contained herein is the exclusive and confidential property of NXP Semiconductors and, except as

otherwise indicated, shall not be disclosed or reproduced in whole or in part.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 2 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

1. NTAG I2C plus Explorer it OM5569/NT322E: Photo

Figure 1: NTA I2C plus Explorer Kit OM5569/NT322E – Connected Tags Explorer Board

with NTA I2C plus Antenna Board 54 x 27mm (pcb type).

Figure 2: Connected Tags Explorer Board OM5569, Rev 2.0.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 3 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

Figure 3: NTA I2C plus Antenna Board OM5569/NT322E, 54 x 27 mm.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 4 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

2. NTAG I2C plus Explorer it OM5569/NT322E: Description

2.1. Operational desription

To demonstrate the unique properties of the NTA I2C tag chip, NXP developed the NTA

I2C plus Explorer Kit OM5569/NT322E which consists from Connected Tags Explorer Board

OM5569 and one NTA I2C plus Antenna Board OM5569/NT322E (54 x 27 mm ).

NXP’s NTA I2C plus Explorer Kit is an all-in-one demonstration/development resource for

NFC connected tags. Designed to emulate using an NTA I2C tag chip in an embedded

electronic system, the kit centers around a multi-purpose microprocessor-based

development/Explorer board, and includes a full complement of hardware and software tools

to support investigation of the NTA I2C chip operation, the NFC RF communication link,

and the I2C serial bus connected link; perform a variety of demonstrations; and develop/test

your own applications.

NTA I2C tag chips mounted on a variety of different antenna types (FR4 PCB-based with

separate antenna pads for custom antenna use, as well as a Flex antenna board based for

easier product insertion testing) and with built-in I2C serial bus interface connectors.

The Connected Tags Explorer board contains an NXP microcontroller (LPC11U24 Cortex-

M0), a R B (red - green - blue) LED and OB (orange – blue – green) push button as well

as an NXP temperature sensor (PCT 2075) and an LCD screen to show the messages

coming from the NTA and the application. NTA I2C plus Antenna Board contains NTA

I2C intergated circuits (NT3H1101/NT3H1201) and pcb wired (or flex) antenna. Connection

between these two boards is via I2C serial link.

The Android application, called NTA I2C Demo, can be found and freely downloaded from

the oogle Play Store. This document applies to the NTA I2C Demoboard application

version 1.5 and above. The Android application is intended to operate on devices running

Android version 4.0 and beyond. The application has been optimized for a correct visioning

of the graphical elements in smartphones featuring different resolutions.

The NTA I2C Android App is meant to be working with the Connected Tags Explorer board,

and an adjacent PCB or flex antennas to test all the features and functionalities the NTA

I2C is offering.

USB port and JTA port are used only for writing firmware into LPC11U24 microcontroller

and for debbuging purposes.

The below picture is a view of the Connected Tags Explorer board and the NTA I2C plus

Antenna Board 54 x 27 mm.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 5 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

Figure 4: Connected Tags Explorer board with NTA I2C plus Antenna Board 54 x 27 mm.

Figure 5: Connected Tags Explorer Board with NTA I2C plus Antenna Board and NFC

device – princip of operation.

Disclaimer :

This module is intended only for development and evaluation purposes, and cannot be used

in a finished product.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 6 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

Figure 6: Connected Tags Explorer Board Rev. 2.0 with NTA I2C plus Antenna Board –

Block diagram.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 7 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

Figure 7: Connected Tags Explorer Board OM5569, Rev. 2.0: dimensions and equipped pcb

with connectors.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 8 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

Figure 8: NTA I2C plus Antenna Board OM5569/NT322E, 54 x 27mm, Rev. 2.0:

dimensions and equipped pcb with connector.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 9 of 18

BL ID Hardware Manual

Project Name: Integration Manual Project ID: 62743

3. NTAG I2C plus Expolorer it OM5569/NT322E: SPECIFICATION

3.1. Connected Tags Explorer Board OM5569: Specifications

Table 1: Connected Tags Explorer Board OM5569, Rev. 2.0 – specifications:

Low Power Microcontroller

LPC11U24 (Cortex - M0)

Oscillator

Internal oscillator (in LPC11U24) up to 12 MHz, Quartz 12 MHz

On-board sensor

Temperature Sensor PCT2075

Output/Input

Outputs 3 x LED (orange, green, blue)

Inputs 3 x key

Supported Interfaces (6-pin connector to NTA I2C Antenna Board)

I2C I2C-bus interface to up to 100 kBd (Standard mode), up to 400 kBs

(Fast mode)

LCD display

2 x 16 character, WLED backlight, I2C serial communication, 3V3

power supply

Supported Interfaces

USB serial interface USB 2.0 interface (also supported Usb 1.1), 12 Mbps (USB 2.0 full

speed), micro usb connector

ISP JTA interface (10-pin header) for ISP programming with

LPCXpressoBoard

Electrical and Mechanical Specifications

Power Supply Board is powered from NTA I2C Antenna Board (from NTA I2C

tag ic); usb power is used only for powering lcd backlight (20 mA)

PCB Dimensions (L x W x

70 mm x 38 mm x 14 mm

Weight approx. 22 g

Operating Temperature 0… + 50 C (without condensing)

Operating Humidity 5 … 95% RH

Certificates CE, FCC

Note:

USB port and JTA port are used only for writing firmware into LPC11U24 microcontroller

and for debbuging purposes.

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 10 of 18

Autres manuels pour NTAG I2C plus

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NXP Semiconductors Microcontrôleur

NXP Semiconductors

NXP Semiconductors MPC5746R Mode d’emploi

NXP Semiconductors

NXP Semiconductors P89LPC9321 UM10310 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale K30 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC800 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC1768 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors ASUG Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MPC-LS-VNP-RDB Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale semiconductor ColdFire MCF51CN128... Manuel utilisateur

NXP Semiconductors

NXP Semiconductors i.MX 8M Manuel utilisateur

NXP Semiconductors

NXP Semiconductors A1006 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors IOTZTB-DK006 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale Freedom Manuel utilisateur

NXP Semiconductors

NXP Semiconductors USB-KW38 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM2NTA5KIT Manuel utilisateur

NXP Semiconductors

NXP Semiconductors FRDM665SPIEVB Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC5410x Manuel utilisateur

NXP Semiconductors

NXP Semiconductors FRDM-KW24D512 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors S32K1 Series Mode d’emploi

NXP Semiconductors

NXP Semiconductors FRDM-KL28Z Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale Kinetis TWR-KV10Z32 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM-SE051ARD Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale semiconductor CSM12D Manuel utilisateur

NXP Semiconductors

NXP Semiconductors KL25 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors SLN-VIZNAS-IOT Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur