Multitech CC1600-11L Manuel utilisateur

CC1600 Series

Card Cages

User Guide

CC1600 Series Card Cages User Guide

PN: S000325B

Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech

Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof

without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.

Revision Date Description

A 12/30/2003 Initial release of CC1600 Series Card Cages User Manual on CD.

B 04/19/2007 Updated the Technical Support contact list.

Trademarks

Trademarks of Multi-Tech Systems, Inc. are as follows: MultiExpress, MultiExpressFax, MultiModemII, Multi-Tech and the

Multi-Tech logo. Windows is a registered trademark of Microsoft Corporation.

Technical Support

France [email protected] +33 1-64 61 09 81

Europe,Asia,Africa [email protected] +44 118 959 7774

U.S., Canada, all others sup[email protected] (800) 972-2439 or (763)717-5863

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(763) 785-3500 or (800) 328-9717

U.S. FAX (763) 785-9874

Technical Support (800) 972-2439

www.multitech.com

Contents

Chapter 1 - Introduction ..................................................................................... 4

1.1 Introduction ............................................................................................. 5

1.2 Description ............................................................................................. 5

1.3 Technical Specifications ......................................................................... 7

Chapter 2 - Installation ....................................................................................... 8

2.1 Introduction ............................................................................................. 9

2.2 Safety Warnings ..................................................................................... 9

2.3 Safety Reco endations ...................................................................... 9

2.4 Installation ............................................................................................. 10

2.4.1 Power Supply Installation ................................................................... 13

2.5 Powering Up ......................................................................................... 14

Chapter 3 - Service and Warranty ................................................................... 15

3.1 Multi-Tech Syste s, Inc. Warranty & Repairs Policies ......................... 16

3.1.1 Warranty ............................................................................................. 16

3.1.2 U.S. and Canadian Customers............................................................ 16

3.1.3 International Customers (outside U.S.A. and Canada) ........................ 17

3.1.4 InternationalDistributors ..................................................................... 17

3.2 Repairs ................................................................................................. 18

3.2.1 Repair Procedures for U.S. and Canadian Customers ........................ 18

3.2.2 Repair Procedures for International Customers................................... 18

3.2.3 Repair Procedures for International Distributors .................................. 19

3.2.4 ReplacementParts ............................................................................. 19

3.3 Technical Support ................................................................................. 19

3.4 Internet Site .......................................................................................... 19

Appendices ........................................................................................................ 20

Appendix A Safety Require ents ................................................................. 21

Mains Wiring Instructions (U.K.) ..................................................................... 22

Power Requirements ........................................................................................ 23

Appendix B Cabling ...................................................................................... 24

Introduction...................................................................................................... 24

Dial/LeasedSplitter.......................................................................................... 24

-21 Series Connector Pinouts .......................................................................... 25

Chapter 1 - Introduction

1.1 Introduction

Welcome to the world of data communications. You have one of the finest modem racks made today. This

owner's manual provides information that will help you to install and operate your Multi-Tech CC1600-Series

Modem Rack. This manual covers the description of the modem rack, its technical specifications, power

supply, procedures for modem installation, RS232C and phone line connections and powering up mode.

1.2 Description

The Multi-Tech CC1600-Series modem racks are designed to house up to 16 modems in a single standard

19-inch rack enclosure. The modem rack accommodates a variety of modems, is capable of redundant

power for uninterrupted service, and is available with either standard RJ11 jacks (models with "-11L" suffix)

or RJ21 multi-line jacks (models with "-21" suffix). Both versions are available for use with either universal

AC input or -48v DC power.

Figure 1-1. CC16xx Rack

Chapter 1 - Introduction

The CC1600 is a generic rack that accommodates a variety of rackmount modems and DSUs. The CC1628

series is designed specifically for V.34 modems. Both rack models come in -11L and -21 versions. The -11L

version connects to standard RJ11 telephone phone cords. The -21 version has three 50-pin connectors for

dial-up and 2-wire or 4-wire leased lines. Both models are equipped for universal AC input or

-48v DC. Finally, both models are available with either a single power supply or dual (redundant ) power

supplies for uninterrupted power. A single power supply can maintain a full complement of modems.

The CC1600-series rack makes it easy for you to monitor your data communications. Each modem has its

own set of LEDs, with separate indicators for Receive Data, Transmit Data, Carrier On, Speed, Off Hook,

Data Terminal Ready, Ring Indicator, and Error (Out-of-Service and Busy).

The rack measures 19" wide, 7" high, and 15" deep. The rack is usually mounted in the same cabinet as your

computer, or can be enclosed in a separate cabinet of its own. Modems are installed by simply opening the

rack front door and sliding in the modems. RS232C cables and phone cords are connected to modem

connectors at the back of the rack.

Chapter 1 - Introduction

1.3 Technical Specifications

Rack Capacity Up to 16 modems

Connectors IEC 320 Inlet Power Connector

Dimensions 19" wide x 7" high x 15" deep

48.26cm wide x 17.8cm high x 38.1cm deep

Weights Rack with one power supply: 21lbs. (9.5 kg)

Rack with two power supplies and 16 modems: 30 lbs. (13.6 kg)

Power Supply Input PS1600 - 90 to 245 Volts AC, 2.0 Amps

PS1648 - -40 to -56 Volts DC, 2.5 Amps

Power Consumption 70 watts, for a fully loaded rack

Ambient Temperature 32° to 120° F (0° to 50° C)

Indicators One LED per power supply

Chapter 2 - Installation

2.1 Introduction

Multi-Tech rackmount modems are generally used in a central site computer environment (i.e., connected to

a mini or mainframe computer) to automatically answer incoming calls from remote users.

Command mode should be disabled unless you wish to give the modem commands. Leaving command

mode enabled offers the possibility of a user calling into the modem and reconfiguring it, or causing it to dial

out. Refer to the appropriate modem owner’s manual to configure the modem for your application.

2.2 Safety Warnings

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at

the network interface.

Use caution when installing or modifying telephone lines.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk

of electrical shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak.

2.3 Safety Recommendations

The following safety recommendations should be observed when installing Multi-Tech CC1600-series

modem racks.

Ensure proper installation of the CC1600-series modem racks in a closed or multi-unit enclosure by

following the recommended installation as defined by the enclosure manufacturer. Do not place the

CC1600-series modem rack directly on top of other equipment or place other equipment directly on top of the

CC1600-series rack.

If installing the CC1600-series modem rack in a closed or multi-unit enclosure, ensure adequate airflow

within the rack so that the maximum recommended ambient temperature is not exceeded.

Ensure that the CC1600-series modem rack is properly connected to earth ground via a grounded power

cord. In the event that a power strip is used, ensure that the power strip provides adequate grounding of the

attached equipment.

Ensure that the mains supply circuit is capable of handling the load of the CC1600. Refer to the power label

on the equipment for load requirements.

Maximum recommended ambient temperature for the CC1600 is 50° C (120° F).

This equipment should be installed only by properly qualified service personnel.

Only connect like circuits. In other words, connect SELV (Secondary Extra Low Voltage) circuits to SELV

circuits and TN (Telecommunications Network) circuits to TN circuits.

Chapter 2 - Installation

2.4 Installation

Perform the following procedure to install the CC1600-series modem rack and install up to 16 modems in the

rack.

1. Unpack the rack and check all items against the shipping list to ensure that you have received the correct

items. Rack components include:

Rack

Power Cord

Owner's Manual

2. Inspect the rack for visible shipping damage. If damage is observed, do not power-on the rack; contact

Multi-Tech's Technical Support for advice (refer to Chapter 3).

3. If no damage is observed, mount the rack in a standard 19-inch wide rack enclosure. Mounting

hardware should be provided with the rack enclosure.

4. If power supply is not installed in rack, refer to the following section for power supply installation. If the

power supply is already installed, proceed to step 5.

5. Open the rack front door.

6. Unpack the modems to be installed in the rack.

7. Refer to the RackMounted Modem Owner's Manual for the switch settings and parameters which pertain

to your application (dial-up/leased-line).

8. Slide a modem into one of the 16 available slots. The component side of the card should be to the right

as in Figure 2-1. The modem's gold edge connector will mate with the rack's backplane. The edge

connector is offset vertically so the modem cannot be inserted upside down.

Modem

Component

Side Rack

Door

Slot 1

Figure 2-1. Modem Installation

Autres manuels pour CC1600-11L

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Multitech Modem

Multitech

Multitech Multimodem MTCBA-G-F1 Manuel utilisateur

Multitech

Multitech MultiModem MT5600DSDV2 Manuel utilisateur

Multitech

Multitech MultiConnect microCell Manuel utilisateur

Multitech

Multitech GPRS Manuel utilisateur

Multitech

Multitech MTD-H5 Manuel utilisateur

Multitech

Multitech MTD100U Manuel utilisateur

Multitech

Multitech Dragonfly Nano MTQN-MNG1-B02 Guide d'application

Multitech

Multitech MT128NTZLX Manuel de l'opérateur

Multitech

Multitech MultiModemII MT5600BR-V92 Manuel utilisateur

Multitech

Multitech MultiModem EDGE Manuel utilisateur

Multitech

Multitech MT9234MU-CDC-XR Manuel utilisateur

Multitech

Multitech MultiModem MT9234ZPX-UPCI Manuel utilisateur

Multitech

Multitech Dragonfly MTQ-L4G1 Manuel utilisateur

Multitech

Multitech MTD-H5 Manuel utilisateur

Multitech

Multitech MultiModem ZPX Manuel utilisateur

Multitech

Multitech MultiModem DID MT5634ZBA-DID Manuel utilisateur

Multitech

Multitech MultiModem ISI ISI3334/4 Manuel utilisateur

Multitech

Multitech MultiConnect Cell 100 series Manuel utilisateur

Multitech

Multitech MultiModem MTCBA-G-UF1 Manuel utilisateur

Multitech

Multitech Multimodem MTCBA-G-F1 Manuel utilisateur

Multitech

Multitech MultiModem MTCBA-E-U Manuel utilisateur

Multitech

Multitech MULTI MODEM II MT5600BA Manuel utilisateur

Multitech

Multitech MultiModem MT4X56USB Manuel utilisateur

Multitech

Multitech MultiModem Cell MTCBA-E1 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur