Keysight Technologies N5221B Manuel utilisateur

Installation Note

Keysight - Add 4-Port Capability

Upgrade Kit for

Version 7 Synthesizers

(For Models With Direct Digital Synthesis (Only))

To Upgrade PNA N5221B and N5222B Option 220 to Option 420

Upgrade Kit Order Number: N5221BU- 680 and N5222BU- 680

Keysight Kit Number: N5222-60131

Notices

2000-2020

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

N5222-90131

Edition

Edition 1, September 2020

Printed in USA/Malaysia

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight Add 4-Port Capability Upgrade Kit

Upgrade Kit Number: N5222-60131

Installation Note

Description of the Upgrade

This upgrade converts your N5221B or N5222B Option 220 2-port analyzer to

a N5221B or N5222B Option 420 4-port analyzer by adding:

— a x4 direct digital synthesizer (DDS) assembly

— an additional source

—anadditionalmixerbrick

— two additional test port couplers

— two additional receiver couplers

— two additional source attenuators

— two additional receiver attenuators

—asplitter

— a modified front panel

—anadditionalcableguard

—LFEbiasteecombiners

— PC assembly, low frequency extension (LFE)

— new cables

Refer to “Overview of the Installation Procedure” on page 15.

This repair must be done at a service center or a self-maintainer service

center! Refer to “Getting Assistance from Keysight” on page 4.

This upgrade kit is for upgrading 2-port Option 220 models with (x2) direct

digital synthesis (DDS) to a 4-port Option 420 with DDS only.

4 Installation Note N5222-90131

Description of the Upgrade

Getting Assistance from Keysight

Installing this upgrade kit requires special skills and experience. If you think

you may not be qualified to do the work, or need advice, contact Keysight.

Contacting Keysight

Assistance with test and measurements needs and information on finding a

local Keysight office are available on the Web at:

http://www.keysight.com/find/assist

If you do not have access to the Internet, please contact your Keysight field

engineer.

If You Have Problems With the Upgrade Kit Contents

Keysight stands behind the quality of the upgrade kit contents. If you have

problems with any item in the kit, refer to www.keysight.com and the Contact

Keysight ()link.

In any correspondence or telephone conversation, refer to the Keysight

product by its model number and full serial number. With this information,

the Keysight representative can determine whether your product is still

within its warranty period.

Installation Note N5222-90131 5

Description of the Upgrade

Getting Prepared

To successfully install this upgrade kit, you will need the following:

—Alicensekey-referto“License Key Redemption” below.

— A PDF copy or a paper copy of the PNA Service Guide - refer to

“Downloading the Online PNA Service Guide” below.

— An ESD-safe work area - refer to “Protecting Your Workspace from

Electrostatic Discharge” below.

— Correct tools - refer to “Tools Required for the Installation” on page 9.

— Enough time - refer to “About Installing the Upgrade” on page 10.

— Test equipment for the post-upgrade adjustments and full instrument

calibration. To view the equipment list, click the Chapter 3 bookmark “Tests

and Adjustments” in the PDF Service Guide1.

The PNA contains extremely sensitive components that can be ruined if

mishandled. Follow instructions carefully when making cable connections,

especially wire harness connections.

The person performing the work accepts responsibility for the full cost of

the repair or replacement of damaged components.

IMPORTANT!

—This document contains references to legacy and to a new A25

HMA26.5 Multiplier/Amplifier assembly. Your model instrument may

have a legacy HMA26.5 or a new HMA26.5 assembly. Both types of

assemblies are compatible with this upgrade. This note is for your

reference, because some figures contain legacy assemblies that your

instrument may not have installed.

—If you want to verify your instrument’s A25 HMA26.5

Multiplier/Amplifier, refer to “Verify the Model/Version of HMA26.5

Installed” on page 7.

—See also, your instrument’s PDF Service Guide a.

a. See “Downloading the Online PNA Service Guide” on page 8.

1. See “Downloading the Online PNA Service Guide” on page 8.

6 Installation Note N5222-90131

Description of the Upgrade

Getting Prepared

License Key Redemption

To enable the option product(s), you must request license key(s) file from the

Keysight Software Manager:

http://www.keysight.com/find/softwaremanager:

To complete the request, you will need to gather the following information:

— From the certificate

— Order number

— Certificate number

— From your instrument

— Model number

— Serial number

Using the information just gathered, you must request license key file(s) from

the Keysight Software Manager:

http://www.keysight.com/find/softwaremanager.

You will need to provide an email address, to which Keysight will promptly

email your license key(s) file. Refer to “License Key Redemption” on page 6.

Verify the License Contents

Refer to the license message you received from Keysight:

If the model number, serial number, or option number do not match those on

the license message you received from Keysight, you will not be able to install

the license key file. If this is the case, contact Keysight for assistance. Refer to

“Getting Assistance from Keysight” on page 4.

Ensure that you are connected to an external server, before attempting to

download your email and license key file.

If you are unfamiliar with the licensing process, refer to the

http://literature.cdn.keysight.com/litweb/pdf/N5242-90024.pdf.

The enclosed Software Entitlement Certificate is a receipt, verifying that

you have purchased a licensed option for the PNA of your choice. You must

now use a Keysight Web page to request a license key file for the

instrument that will receive the option.

Installation Note N5222-90131 7

Description of the Upgrade

Getting Prepared

Verify the Model/Version of HMA26.5 Installed

This upgrade kit contains components for use with PNA models using the

legacy HMA26.5 part number 5087-7765. If your PNA has the newer HMA26.5

part number N5240-60101 installed you may discard these parts:

— A22 splitter 5087-7139

— W42 N5222-20009

— W43 N5222-20007

— W44 N5222-20008

Figure 1

(If you have the legacy 5086-7765 HMA26.5, please discard the N5245-20195

semi-rigid cables. Refer to Figure 1 on page 7.)

The new N5240-60101 HMA26.5 has the splitter integrated into the

assembly. Refer to Figure 1 on page 7.

Comparison of Legacy HMA26.5 (5087-7765) and New HMA26.5

(N5240-60101)

8 Installation Note N5222-90131

Description of the Upgrade

Getting Prepared

Downloading the Online PNA Service Guide

To view the online Service Guide for your PNA model number, use the following

steps:

1. Go to www.keysight.com.

2. In the Search box, enter the model number of the analyzer (Ex: N5222B)

and click Search.

3. Click Technical Support > Manuals.

4. Click Service Manual.

5. Click the service guide title to download the PDF file.

6. When the PDF of the Service Guide is displayed, scroll through the

Contents section bookmarks to locate the information needed.

Protecting Your Workspace from Electrostatic Discharge

For information, click on the Chapter 1 bookmark, “Electrostatic Discharge

Protection” in the PDF Service Guide1.

ESD Equipment Required for the Installation

1. See “Downloading the Online PNA Service Guide” on page 8.

Description Keysight Part Number

ESD grounding wrist strap 9300-1367

5-ft grounding cord for wrist strap 9300-0980

2 x 4 ft conductive table mat and 15-ft grounding wire 9300-0797

ESD heel strap (for use with conductive floors) 9300-1308

Installation Note N5222-90131 9

Description of the Upgrade

Getting Prepared

Tools Required for the Installation

Description Qty Part Number

T-6 TORX driver - set to 4 in-lbs (0.45 N.m) 1 N/A

T-10 TORX driver - set to 9 in-lbs (1.02 N.m) 1 N/A

T-20 TORX driver - set to 21 in-lbs (2.38 N.m) 1 N/A

5/16-in (8 mm) nutsetter or open end torque wrench - set to 10 in-lbs

(1.13 N.m)

1N/A

5/16-in (8 mm) nutsetter or open end wrench (to stabilize the bias tee

combiner when torquing cables)

1N/A

5/16-in (8 mm) nutsetter or open end torque wrench - set to 21 in-lbs

(2.38 N.m)

1N/A

T-6 TORX driver - set to 6 in-lbs (0.68 N.m) 1 N/A

T-20 TORX driver - set to 21 in-lbs (2.38 N.m) 1 N/A

5/16-in (8 mm) nutsetter or open end torque wrench- set to 8 in-lbs (0.9

N.m)

1N/A

3/16-in (5 mm) nutsetter or open end torque wrench - set to 6 in-lbs

(0.68 N.m)

1N/A

5/8-in (16 mm) nutsetter or open end torque wrench - set to 21 in-lbs

(2.38 N.m)

1N/A

1-in (25.4 mm) torque wrench - set to 72 in-lbs (8.15 N.m) 1 N/A

9 mm nutsetter or open end torque wrench - set to 21 in-lbs (2.38 N.m) 1 N/A

1/4-in (6 mm) open end wrench 1 N/A

Use a 5/16-in torque wrench set to 10 in-lbs on all cable connections,

except the front panel coupler to Bias-T combiner cable connections.

Torque these to 8 in-lbs.

Additional exception: Torque the front and rear panel bulkhead connectors

and these connections to 21 in-lb.

10 Installation Note N5222-90131

Description of the Upgrade

Getting Prepared

About Installing the Upgrade

Products affected N5221B and N5222B Option 220 with x2 DDS installed

Installation to be performed by Keysight service center or personnel qualified by Keysight

Estimated installation time 5 hours

Estimated adjustment time 3 hours

Estimated full instrument calibration time 7.5 hours

Autres manuels pour N5221B

Ce manuel convient aux modèles suivants

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies N5251A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies E5072A Manuel utilisateur

Keysight Technologies

Keysight Technologies B1500A Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U1701B Manuel utilisateur

Keysight Technologies

Keysight Technologies B2901A Manuel utilisateur

Keysight Technologies

Keysight Technologies N9041B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies M937 A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies MY53280000 Guide de démarrage rapide

Keysight Technologies

Keysight Technologies N9040B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies B1505A Manuel utilisateur

Keysight Technologies

Keysight Technologies B1500A Mode d’emploi

Keysight Technologies

Keysight Technologies U3810A Manuel utilisateur

Keysight Technologies

Keysight Technologies EXA N9010B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies 85059B Manuel de service

Keysight Technologies

Keysight Technologies Agilent Technologies PXI Express M9202A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies 53147A Manuel utilisateur

Keysight Technologies

Keysight Technologies 6811C Mode d'emploi

Keysight Technologies

Keysight Technologies U1281A Manuel utilisateur

Keysight Technologies

Keysight Technologies N4373E Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies UXA Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9000A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies E4981A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur