Keysight Technologies N4373E Manuel utilisateur

Setup Guide

Keysight N4373E Lightwave

Component Analyzer

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international copyright

laws.

Manual Part Number

4373E-90A01

Edition

Edition 2.0, January 2020

Printed in Malaysia

Keysight Technologies Deutschland GmbH

Herrenberger Strasse 130,

71034 Böblingen, Germany

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acquisition

Regulation (“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement

(“DFARS”) 227.7202, the U.S. government

acquires commercial computer software

under the same terms by which the soft-

ware is customarily provided to the public.

Accordingly, Keysight provides the Soft-

ware to U.S. government customers under

its standard commercial license, which is

embodied in its End User License Agree-

ment (EULA), a copy of which can be found

at http://www.keysight.com/find/sweula.

The license set forth in the EULA represents

the exclusive authority by which the U.S.

government may use, modify, distribute, or

disclose the Software. The EULA and the

license set forth therein, does not require

or permit, among other things, that Key-

sight: (1) Furnish technical information

related to commercial computer software

or commercial computer software docu-

mentation that is not customarily provided

to the public; or (2) Relinquish to, or other-

wise provide, the government rights in

excess of these rights customarily provided

to the public to use, modify, reproduce,

release, perform, display, or disclose com-

mercial computer software or commercial

computer software documentation. No

additional government requirements

beyond those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are explicitly

required from all providers of commercial

computer software pursuant to the FAR and

the DFARS and are set forth specifically in

writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as appli-

cable in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions

are fully understood and met.

2Keysight N4373E Lightwave Component Analyzer Setup Guide

Keysight N4373E Lightwave Component Analyzer Getting Started Guide 3

Contents

1 Introduction

Documentation 6

General Safety Considerations 7

Safety symbols 7

Instrument markings 7

Initial safety information 10

Line power requirements 12

Environmental information 13

Optical Test Set Front and Rear Panels 14

2-port PNA version 14

4-port PNA version 17

Rear panel 20

2 Setting Up the Instrument

Unpacking the Lightwave Component Analyzer 22

Mounting the Test Set and the Network Analyzer 24

Preparing the Test Head 24

Preparing the Network Analyzer 26

Mounting the Network Analyzer on the Test Head 27

Setting Up the Lightwave Component Analyzer 30

Keysight N4373E Lightwave Component Analyzer

Setup Guide

1Introduction

Documentation / 6

General Safety Considerations / 7

Optical Test Set Front and Rear Panels / 14

6 Keysight N4373E Lightwave Component Analyzer Setup Guide

1 Introduction

Documentation

The documentation for the Keysight N4373E Lightwave Component

Analyzer consists of

• The documentation for the Keysight network analyzer. This

documentation i s on the hard disk of the network analyzer. Refer to it

for using the network analyzer for electrical to electrical measurements,

or for the configuration of the network analyzer.

• The documentation for the optical test set and the Lightwave

Component Analyzer application. Refer to this documentation for

information on using the optical test set, together with the network

analyzer, for optical to optical, electrical to optical and optical to

electrical measurements, or for setting up your light wave component

analyzer.

Keysight N4373E Lightwave Component Analyzer Setup Guide 7

Introduction 1

General Safety Considerations

This product has been designed and tested in accordance with the

standards listed on the manufacturer’s Declaration of Conformity

(for the latest DoC, please visit the web link:

http://www.keysight.com/go/conformity), and has been supplied in a safe

condition. The documentation contains information and warnings that

must be followed by the user to ensure safe operation and to maintain the

product in a safe condition.

Safety symbols

Instrument markings

The instruction manual symbol. The product is marked with this

warning symbol when it is necessary for the user to refer to the

instructions in the manual.

The laser radiation symbol. This warning symbol is marked on

products which have a laser output.

The Off-On symbols are used to mark the positions of the

instrument power operating switch.

CAUTION

The caution sign denotes a hazard. It calls attention to a procedure

which, if not correctly performed or adhered to, could result in damage to

or destruction of the product. Do not proceed beyond a caution sign until

the indicated conditions are fully understood and met.

WARNING

The warning sign denotes a hazard. It calls attention to a procedure

which, if not correctly performed or adhered to, could result in injury or

loss of life. Do not proceed beyond a warning sign until the indicated

conditions are fully understood and met.

8 Keysight N4373E Lightwave Component Analyzer Setup Guide

1 Introduction

The recycling symbol indicates the general ease with which the

instrument can be recycled.

The C-Tick mark is the certification mark of the Australian

Communications Authority.

The CE mark is the conformity marking of the

European Community.

The CSA mark is a the certification mark of the Canadian

Standards Association.

WARNING

If this product is not used as specified, the protection provided by the

equipment could be impaired. This product must be used in a normal

condition (in which all means for protection are intact) only.

WARNING

No operator serviceable parts inside. Refer servicing to qualified service

personnel. To prevent electrical shock do not remove covers.

WARNING

This is a Safety Class 1 Product (provided with protective earth). The

mains plug shall only be inserted in a socket outlet provided with a

protective earth contact. Any interruption of the protective conductor

inside or outside of the instrument is likely to make the instrument

dangerous. Intentional interruption is prohibited.

Keysight N4373E Lightwave Component Analyzer Setup Guide 9

Introduction 1

WARNING

To prevent electrical shock, disconnect the instrument from mains

before cleaning. Use a dry cloth or one slightly dampened with water to

clean the external case parts. Do not attempt to clean internally.

WARNING

Using controls or adjustments or performing procedures other than

those specified in the documentation supplied with your equipment can

result in hazardous radiation exposure.

CAUTION

This product complies with over-voltage Category II and Pollution

Degree 2.

CAUTION

Ventilation requirements: When installing the product in a cabinet, the

convection into and out of the product must not be restricted. The

ambient temperature (outside the cabinet) must be less than the

maximum operating temperature of the product by 4 °C for every

100 watts dissipated in the cabinet. If the total power dissipated in the

cabinet is greater than 800 watts, then forced convection must be used.

CAUTION

Install the instrument so that the power switch is readily identifiable and

is easily reached by the operator. This is the instrument disconnecting

device. It disconnects the mains circuit from the mains supply before

other parts of the instrument. Alternatively, an externally installed switch

or circuit breaker (which is readily identifiable and is easily reached by

the operator) may be used as a disconnecting device.

CAUTION

Always use the three-prong AC power cord supplied with this

instrument. Failure to ensure adequate earth grounding by not using this

cord may cause instrument damage.

10 Keysight N4373E Lightwave Component Analyzer Setup Guide

1 Introduction

Initial safety information

The laser source used in the Lightwave Component Analyzer is classified

as Class 1M according to IEC 60825-1 (2014).

All laser sources comply with 21 CFR 1040.10 except for deviations

pursuant to Laser Notice No. 50, dated 2007-06-24.

Laser Safety

Laser class 1M label

Figure 1 Class 1M Safety Label

A sheet of laser safety labels is included. In order to meet the requirements

of IEC 60825-1 (2014) we recommend that you stick the laser safety

labels, in your language, onto a suitable location on the outside of the

instrument where they are clearly visible to anyone using the instrument.

CAUTION

This instrument has autoranging line voltage input. Be sure the supply

voltage is within the specified range.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies N5290/1A PNA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies UXA N9040B Manuel utilisateur

Keysight Technologies

Keysight Technologies FieldFox N9927-90002 Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies CX3300 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies M9300A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies P5000A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 34136A Manuel utilisateur

Keysight Technologies

Keysight Technologies N9344C Manuel utilisateur

Keysight Technologies

Keysight Technologies N9020A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies PNA-X N5241A Manuel utilisateur

Keysight Technologies

Keysight Technologies ENA Series Guide de démarrage rapide

Keysight Technologies

Keysight Technologies E5055A SSA-X Manuel utilisateur

Keysight Technologies

Keysight Technologies N9020A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9000B Manuel utilisateur

Keysight Technologies

Keysight Technologies N4960A Manuel utilisateur

Keysight Technologies

Keysight Technologies PNA-L N5230A Manuel utilisateur

Keysight Technologies

Keysight Technologies X Series Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies U1401B Manuel utilisateur

Keysight Technologies

Keysight Technologies N7020A Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies M9391A PXIe Manuel utilisateur

Keysight Technologies

Keysight Technologies M9391A PXIe Guide de l'utilisateur

Keysight Technologies

Keysight Technologies FieldFox N9912A104 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur