Infineon AIROC CYW20721 Manuel utilisateur

Quick start guide

AIROC™ CYW20721 Bluetooth® and Bluetooth® LE system on chip evaluation kit

CYW920721M2EVB-03

www.cypress.com/cyw920721m2evb-03

Kit contents

1. CYW9BTM2BASE1 baseboard

2. CYW920721M2EPA3 Bluetooth® radio card

(connected to the baseboard using the M.2 connector)

3. USB standard-A to Micro-B cable

4. Quick start guide (this document)

Quick start guide

Before you start

1. Register on the Developer Community and

then download and install ModusToolbox™

soware v2.4 (or later) with the Bluetooth®

SDK at

https://www.cypress.com/products/

modustoolbox.

2. Do the following to download and

install the ‘HelloSensor’ code example.

This step will also install the ‘HelloClient’

peer application required later.

a. In Eclipse IDE for ModusToolbox™

soware, select File >New application.

This launches the project creator.

b. In the project creator, click

AIROC™ Bluetooth® BSPs.

c. Select the ‘CYW920721M2EVB-03’

kit and click Next.

d. Click Create and then click Close.

Note: The kit is pre-programmed with the

‘Hello Sensor’ application.

3. Connect a USB cable between the PC and

CYW920721M2EVB-03 (J6) to power the kit.

Run the ‘HelloClient’ application

1. Locate the ‘HelloClient’ peer sample

application that complements the

‘HelloSensor’ application at

…\mtw23\mtb_shared\wiced_btsdk\

tools\btsdk-peer-apps-ble\release-v3.2.0\

hello_sensor\Windows\HelloClient\

Release\x64.

2. Run the HelloClient executable and

select the HelloSensor device, which

appears as a device with the name ‘Hello’.

3. When prompted, allow pairing from

the client to the HelloSensor device.

4. In the HelloClient window, select Allow

Notifications next to the Hello Input

characteristic.

5. Press button SW3 on the evaluation kit.

Observe that the Value field shows the

Hello 1 message.

6. Press SW3 again, and observe that the Value

field is incremented.

ModusToolbox™ soware

HelloClient application

Quick start guide

1. VDDIO current measurement

jumper (J17)

2. Peripheral enable jumper (J19)

3. VDDIO select jumper (J7)

4. Baseboard power status LED (D3)

5. VBAT select jumper (J8)

6. USB connector for programming/

USB-UART (J6)

7. VPA select jumper (J16)

8. KitProg3 based on PSoC™ 5LP

MCU (U12)

9. KitProg3 mode select (SW5)

10. KitProg3 status LED (D5)

11. Debug interface select jumper (SW8)

12. Debug header (J13)

13. Recovery button (SW1)

14. Header compatible with Arduino (J1)

15. Reset button (SW2)

16. Header compatible with Arduino (J2)

17. User button (SW3)

18. User LEDs (D1, D2)

19. User LED/DMIC switch (SW4)

20. Digital mic sound port (J16)

21. CYW920721M2EPA3 Bluetooth®

M.2 radio card

22. Azurewave AW-BT315W Bluetooth® and

Bluetooth® LE module

(CYW920721M2EPA3.U1A)

23. External antenna connector

(CYW920721M2EPA3.J1)

24. Analog mic footprint (MIC1)

25. Thermistor (TH2)

26. Thermistor enable jumper (J18)

27. Header compatible with Arduino (J4)

28. Bluetooth® I/O header (J12)

29. Header compatible with Arduino (J3)

30. Bluetooth® I/O header (J11)

31. Ambient light sensor (U10)

16 1710 18

11 12

13 14

293031

AIROC™ CYW20721 evaluation kit details

Published by

Infineon Technologies AG

81726 Munich, Germany

Document Number: 002-34132 Rev. **

Date: 10 / 2021

Please note!

THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND

ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE

REGARDED AS A WARRANTY,GUARANTEE OR DESCRIPTION OF

ANY FUNCTIONALITY,CONDITIONS AND/OR QUALITY OF OUR

PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE.

WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR

PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT

PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND

THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE

THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED

APPLICATION.

WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR

THE INFORMATION GIVEN HEREIN AT ANY TIME.

Additional information

For further information on technologies, our products, the

application of our products, delivery terms and conditions

and/or prices, please contact your nearest Infineon Technologies

oﬀice (www.infineon.com).

Warnings

Due to technical requirements, our products may contain

dangerous substances. For information on the types in question,

please contact your nearest Infineon Technologies oﬀice.

Except as otherwise explicitly approved by us in a written

document signed by authorized representatives of Infineon

Technologies, our products may not be used in any life-

endangering applications, including but not limited to medical,

nuclear,military,life-critical or any other applications where a

failure of the product or any consequences of the use thereof

can result in personal injury.

www.infineon.com

Quick start guide

NC/NC

VIO_BASE/VDD_IO

SHIELD_RST_L/RST_N

VDD3P3/NC

VDDUSB/NC

GND/GND

NC/NC

ARD_A0_THERMISTOR/P8

ARD_A1/P9

ARD_A2/P16

ARD_A3/P28

ARD_A4/P29

ARD_A5/P25

ARD_D7/P0

ARD_D6/P34

ARD_D5_SWDIO/P3

ARD_D4_SWDCLK/P5

ARD_D3/P2

ARD_D2/P1

ARD_D1/P33

ARD_D0/P32

SCL/P12

SDA/P11

NC/NC

GND/GND

ARD_D13/P7

ARD_D12/P4

ARD_D11/P6

ARD_D10/P10

ARD_D9/P13

ARD_D8/P38

GND/GND

LED1_L/P26

LED2_L/P27

RSVD_10/NC

RSVD_11/DEV_WAKE

RSVD_12/HOST_WAKE

COEX1/BT_GPIO_2

COEX2/BT_GPIO_3

COEX3/BT_GPIO_5

GND/GND

RSVD_1-USER_BTN/P17

RSVD_2/P18

RSVD_3/P14

RSVD_4/P15

RSVD_5/P22

RSVD_6/P23

RSVD_7/P24

RSVD_8/P37

RSVD_9/P30

VIO_BASE/VDD_IO

AIROC™ CYW20721 evaluation kit pinout details

Legend Baseboard I/Os CYW20721 I/Os

Ce manuel convient aux modèles suivants

Autres manuels Infineon Matériel informatique

Infineon

Infineon TRAVEO T2G Manuel utilisateur

Infineon

Infineon TLE4241SYS SHIELD Manuel utilisateur

Infineon

Infineon AIROC CYW20829 Manuel utilisateur

Infineon

Infineon REF-Vacuum-C101-2ED Manuel utilisateur

Infineon

Infineon EZ-PD PMG1 Manuel utilisateur

Infineon

Infineon R 48V BATT Switch10 Manuel utilisateur

Infineon

Infineon Cypress S6SATU01A Series Manuel utilisateur

Infineon

Infineon CY8CPROTO-062S2-43439 Manuel utilisateur

Infineon

Infineon ICL8001G Mode d’emploi

Infineon

Infineon TLE4972 Manuel utilisateur

Infineon

Infineon CY8CKIT-028-SENSE Manuel utilisateur

Infineon

Infineon AIROC IFW56810-00 Manuel utilisateur

Infineon

Infineon KIT T2G-B-E LITE Manuel utilisateur

Infineon

Infineon CY8CKIT-028-SENSE Manuel utilisateur

Infineon

Infineon FingerTIP FTF 1100 MF1 Manuel utilisateur

Infineon

Infineon BTN9970 Manuel utilisateur

Infineon

Infineon XMC7200 Manuel utilisateur

Infineon

Infineon BTN9970 Manuel utilisateur

Infineon

Infineon EZ-PD PAG2S-2P Manuel utilisateur

Infineon

Infineon OPTIREG TLS850A4TEV50 Manuel utilisateur

Infineon

Infineon EASY3452 Manuel utilisateur

Infineon

Infineon BTN9960 Manuel utilisateur

Infineon

Infineon Traveo II CPU board Manuel utilisateur

Infineon

Infineon TRAVEO II CPU BOARD Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur