Huawei EchoLife HG510 Manuel utilisateur

B roadband

B roadbandB roadband

B roadband P akistan

P akistanP akistan

P akistan

ADSL Installation Guide

HUAWEI EchoLife HG-510

Page 1

PTCL introduces DSL service for our valued subscribers. We are committed to

provide you quality internet services. Please follow the installation instructions and

log on to your ADSL broadband link.

Step 1: Connecting to the Splitter, Power Connection & LAN cable.

1 Line hole connects to PTCL wire or Wall phone Jack (RJ-11 Jack).

2 Modem hole connects to the DSL jack of the ADSL CPE (Customer Premises

Equipment).

3 Phone hole connects to a telephone set.

4 Connect the Power Adapter to the AC power plug and attach the connector of

adapter to the CPE and switch it on.

5 Attach one end of LAN wire (RJ-45) to the LAN interface of CPE and the other

end to the LAN wire to the LAN interface of computer’s LAN card.

6 Link Indicator lights will lit up and show the connectivity. ADSL light will start

blinking and soon will be static as a sign of connectivity with our system, if the

line is properly jumpered in PTCL premises with the DSLAM (Digital

Subscriber Line Access Multiplexer).Joint less and direct cable line from the

nearest PTCL pole or cabinet must be connecting to your splitter and then all

the phone extensions must be taken from the phone hole of splitter. The Drop

wire distance from PTCL pole or Cabinet must not be ideally more than 50

meters.(Twisted pair wire can be longer)

Step 2: ADSL Configuration in CPE and Computer

1. Go to Start Menu < Control Panel < Network and Internet Connections < Network

Connections. Check that the Local Area Connection is enabled. Right click local

Area network and click properties. Following window will be shown.

Page 2

2. Double click “internet protocol (TCP/IP)”, Check “Use the following IP

address” and make the following settings:

IP Address: 192.168.1.3

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

Then, check “Use the following DNS server addresses” and make

the following settings:

Preferred DNS Server: 203.99.163.240

Alternate DNS Server: 203.135.0.170

3. Now open Internet Explorer and write “192.168.1.1” in address bar and press

enter. There must not be any proxy setting in the internet Explorer.

Page 3

A small pop up window will open as shown in the figure below and ask ”User Name”

and “Password” for opening the CPE’s interface.

Enter User Name: “admin” and Password: “admin” and press OK.

4. Following page will be displayed after entering correct User name and Password:

Page 4

5. Click the Device Info link on the left hand side tabs, more options will be shown. Click

Statistics and further more options will be shown, among them select ADSL.

Page 5

6. Clicking ADSL will show the ADSL line parameters, Note the SNR Margin and Line

Attenuation. SNR must be higher than 08 dB and Line Attenuation must be less than 45

dB for establishing a stable DSL connection.

7. Select “Advanced Setup” from the left hand tabs and following window will be displayed

8. “Wide Area Network (WAN) Setup” window is shown displaying the list of default

connections. Check all of them except one and click remove button.

9. Edit the connection by pressing the Edit button.

Page 6

10. Enter the values of VPI = 0 & VCI = 103 for copper (Note: For ONU use VPI=8 &

VCI=81) and check “Enable Quality of Service” and click Next as shown under.

11. Select “PPP over Ethernet PPPoE” and click Next.

12. Enter the Username = 051+telephone No. of subscriber e.g., (0512255678) and Password

= New Product No. as provided on External Construction Orders e.g., (1130000xxxx).

Page 7

13. Uncheck the “Enable Firewall” checkbox and click Next as shown below.

Page 8

14. “WAN Setup Summary” page is displayed showing the settings/configurations, click Save

button to save the configurations.

15. Click Save/Reboot, a message window is shown, click OK to save the changes.

Page 9

16. DSL Router Reboot window is shown. Wait until the next window is shown displaying

the Device Info.

17. Go again to Internet Protocol (TCP/IP) Properties and Select Obtain an IP address

automatically and leave the DNS server addresses unchanged as shown in the picture

below and press Ok.

Open the Internet Explorer and start browsing the sites for successful configuration and DSL

connection establishment.

Autres manuels pour EchoLife HG510

2

Autres manuels Huawei Modem

Huawei

Huawei Broadband E219 Manuel utilisateur

Huawei

Huawei EC150 Manuel utilisateur

Huawei

Huawei EC1261 Instructions de montage

Huawei

Huawei EC 121 Manuel utilisateur

Huawei

Huawei HiLink K3773 Manuel utilisateur

Huawei

Huawei E5830 Manuel utilisateur

Huawei

Huawei E510 Manuel utilisateur

Huawei

Huawei E169 Manuel utilisateur

Huawei

Huawei GL08D Manuel utilisateur

Huawei

Huawei E5573CS-509 Manuel utilisateur

Huawei

Huawei E5577 Manuel utilisateur

Huawei

Huawei SmartAX MT882a Manuel utilisateur

Huawei

Huawei E368 Manuel utilisateur

Huawei

Huawei 4G Dongle Manuel utilisateur

Huawei

Huawei D105 Manuel utilisateur

Huawei

Huawei E589 Manuel utilisateur

Huawei

Huawei Turbo Stick E182 Manuel utilisateur

Huawei

Huawei E220 Mode d’emploi

Huawei

Huawei B2368 Manuel utilisateur

Huawei

Huawei E160E Manuel utilisateur

Huawei

Huawei E3372 Manuel utilisateur

Huawei

Huawei CG1241 Manuel utilisateur

Huawei

Huawei Eircom F2000 Manuel utilisateur

Huawei

Huawei E372 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur