Huawei Turbo Stick E182 Manuel utilisateur

Getting started guide

Turbo Stick

Huawei E182

T:5”

T:6.693”

T:5”

T:6.693”

Thank you for purchasing a Turbo Stick from Bell. This Turbo

Stick will enable you to connect to the Internet. This guide

provides an overview of your new Turbo Stick and details on

how to configure your computer for use with this Turbo Stick.

Getting started 2

System requirements 3

Inserting your Bell SIM card 4

Preparing your computer for installation 5

Installation 6

Start-up 8

Using your Turbo Stick 10

Hardware overview 11

Inserting and removing your Turbo Stick from your computer 12

Unblocking a SIM card 13

Troubleshooting 14

Welcome

T:5”

T:6.693”

T:5”

T:6.693”

Before installing your Turbo Stick, please ensure you

have the following:

A Bell wireless account with a Mobile Internet plan. (If you don’t

have an account or a Mobile Internet plan, speak with a Bell

account representative to get set up.)

An active Bell SIM card.

Your Mobile Directory Number (MDN),

or phone number ______________________________

Getting started

T:5”

T:6.693”

T:5”

T:6.693”

WINDOWS

Operating system

Microsoft® Windows XP (SP 2 & 3, 32/64 bit),

Windows Vista™ (SP 1 & 2, 32/64 bit) with 500 MHz

CPU, or Windows 7 (32/64-bit) with 1 GHz CPU

Card slot 1 USB 1.1 or 2.0 port

COM ports 2 free COM ports

I/O Resources 1 IRQ, 4096 bytes of I/O space

Memory 512MB (XP), 1GB (Vista), or 1GB (7)

Disk space 50MB

To install and operate your Turbo Stick, ensure your computer has

the following system resources:

System Requirements

T:5”

T:6.693”

T:5”

T:6.693”

Your Turbo Stick requires an activated Bell SIM card to function. If

the SIM card was not inserted at the time of purchase, please

insert it now, as described below.

1. Slide the back cover to remove it from the Turbo Stick.

2. Insert the SIM/USIM card and the microSD card into the

corresponding card slots, as shown in the following figure.

3. Replace the back cover and slide it into place.

NOTE

Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the

SIM/USIM card slot and the microSD card is inserted according to the direction as labeled

on the microSD card slot.

Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, the

card as well as your Turbo Stick may get damaged and the data stored on the card

may be corrupted.

Inserting your Bell SIM card

T:5”

T:6.693”

T:5”

T:6.693”

1. Ensure your antivirus and firewall programs are set to allow

software installation.

2. Ensure you have Administrator Rights and the user name

and password – check your computer’s Help files for details

on this feature.

Preparing Your Computer for Installation

T:5”

T:6.693”

T:5”

T:6.693”

Installation

Installing your Turbo Stick is easy, simply follow these instructions.

If you have a current version of Mobile Connect on your computer,

the version on your Turbo Stick will uninstall the current version

automatically before installing the new one.

Insert your Turbo Stick into a USB port. Do not forcibly insert it as

this may damage both the device and the port. Your Turbo Stick

powers on when inserted, and your computer may beep.

Follow the InstallShield® Wizard,

it will guide you through the

process of installing the Mobile

Connect application starting with

the language selection.

Use the Next and Back buttons

to navigate through the

installation steps.

To continue the installation, you

must read and accept the terms

of the License Agreement.

T:5”

T:6.693”

T:5”

T:6.693”

Once the installation is complete, you may need

to restart your computer. If a restart is not required,

Mobile Connect will launch automatically. If your

computer restarts, launch Mobile Connect by

double-clicking on the Mobile Connect icon.

The installation process may take

several minutes to complete with

no progres shown on the progress

bar – please be patient. Select

Finish to complete the installation.

T:5”

T:6.693”

T:5”

T:6.693”

Start-up

With your Turbo Stick inserted, double-click on the Mobile Connect

icon from your desktop.

Mobile Connect will initialize, scan for your Turbo Stick,

and the main program window will appear with

“Bell high-speed network is available.” Click “Connect.”

IMPORTANT

Once a connection has been established, the application may open your

web browser and load a predetermined URL. This is to demonstrate

that Internet access is operating correctly. If you wish to disable

this Auto Launch web browser feature or change the start page,

you may do so prior to connecting by following these instructions:

Go to Tools. Select Profiles. Profiles window will be displayed.

Select Profile named “Bell high-speed network”. Click Edit.

Select the “General” tab at the top of the window.

Uncheck Auto Launch browser checkbox OR if you want a different

web page to automatically launch, enter the desired web address in

the text box.

T:5”

T:6.693”

T:5”

T:6.693”

Mobile Connect will initialize, scan for your Turbo Stick, and the

main program window will appear when Bell service is found.

When you try to connect, Mobile Connect will check if your Turbo

Stick and account have been activated on the Bell network.

Your Turbo Stick must be activated and in an area with network

coverage to operate on the Bell Mobility data network.

To download the full Mobile Connect user manual or software

updates, please visit bell.ca/mobileconnect

T:5”

T:6.693”

T:5”

T:6.693”

Autres manuels pour Turbo Stick E182

Table des matières

Autres manuels Huawei Modem

Huawei

Huawei USB 3G Manuel d'installation et d'exploitation

Huawei

Huawei E220 Manuel utilisateur

Huawei

Huawei E587 Caractéristiques techniques

Huawei

Huawei Broadband E219 Manuel utilisateur

Huawei

Huawei SoftBank 005HW Manuel utilisateur

Huawei

Huawei EC156 Manuel utilisateur

Huawei

Huawei EchoLife HG510 Manuel utilisateur

Huawei

Huawei EG162G Manuel utilisateur

Huawei

Huawei USB modem Manuel utilisateur

Huawei

Huawei E160 Manuel utilisateur

Huawei

Huawei E3531S-3 Guide de dépannage

Huawei

Huawei Hilink E3276s Manuel utilisateur

Huawei

Huawei M3710 Manuel utilisateur

Huawei

Huawei Maxis E5832 Manuel utilisateur

Huawei

Huawei 4G Dongle Manuel utilisateur

Huawei

Huawei Mobile Broadband Manuel utilisateur

Huawei

Huawei E272 Manuel utilisateur

Huawei

Huawei EC122 Manuel utilisateur

Huawei

Huawei BM632 Manuel utilisateur

Huawei

Huawei R227h Manuel utilisateur

Huawei

Huawei MT886 Manuel utilisateur

Huawei

Huawei EchoLife BM635 WiMAX CPE Manuel utilisateur

Huawei

Huawei EC325 Manuel utilisateur

Huawei

Huawei Eircom F2000 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur