Hirschmann MACH102 Series Manuel utilisateur

Installation MACH102

Release

09/2014

Technical support

https://hirschmann-support.belden.eu.com

User Manual

Installation

Industrial Ethernet Workgroup Switch

MACH102 Family

MACH 102-8TP-F

MACH 102-24TP-F

MACH 102-8TP + M1-8TP-RJ45 + M1-8MM-SXC

MACH 102-8TP + M1-8SM-SXC + M1-8SFP

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Installation 039 710-001-06-0914 – 10.9.14

Installation MACH102

Release

09/2014 3

Contents

Safety instructions 4

About this manual 9

Legend 9

1 Description 10

1.1 Description of the device variants 11

1.1.1 MACH102 basic devices 11

1.1.2 MACH102 media modules 15

1.1.3 SFP modules 18

2 Assembly and start-up 20

2.1 Installing the device 20

2.1.1 Unpacking and checking the content of the package 20

2.1.2 Installing media modules 20

2.1.3 Installing the SFP modules 21

2.1.4 “FAULT” signal contact 22

2.1.5 Dimension drawings 23

2.1.6 Installing the device and grounding 24

2.1.7 Supply voltage 27

2.1.8 Operating the device 30

2.1.9 Connecting network cables 31

2.2 Display elements 33

2.3 Basic set-up 35

2.4 Disassembly 37

3 Technical data 39

A Further Support 47

4Installation MACH102

Release

09/2014

Safety instructions

This documentation contains instructions which must be observed to ensure

your own personal safety and to avoid damage to devices and machinery.

Correct usage

Only use the device for those purposes specified in the catalog and in the

technical description. Only operate the device with external devices and

components that are recommended and permitted by the manufacturer.

The proper and safe operation of this product depends on proper handling

during transport, proper storage, assembly and installation, and conscien-

tious operation and maintenance procedures.

Working voltage

The supply voltage is electrically isolated from the housing.

Connect solely an working voltage that corresponds to the type plate

of your device.

Use undamaged parts.

The device is free of any service components. Internal fuses are trig-

gered solely in the case of a detected fault in the device. In case of

damage or malfunction of the device, turn off the operating voltage and

return the device to the plant for inspection.

Only switch on the device when the housing is closed.

Only use connection cables that are permitted for the specified

temperature range.

Relevant for North America:

Only use copper wire/conductors of class 1, 60/75°C or 75°C.

Make sure that the disconnecting device is easily accessible so that

the MACH102 device can be disconnected from the mains voltage.

If you disconnect the device from the mains voltage using

- the plug in the socket

- an on/off switch

it must be easily accessible.

Note: When using devices with redundant power supply (MACH 102-

8TP-R, MACH 102-8TP-FR, MACH 102-24TP-FR), pull both non-heating

device plugs to disconnect the device from the power supply. When using

PoE modules, also disconnect or remove the PoE voltage.

Shielding ground

The shielding ground of the connectable twisted pair lines is connected to

the protective conductor connection via the front panel.

Beware of possible short circuits when connecting a cable section with

conductive shielding braiding.

Installation MACH102

Release

09/2014 5

Housing

Only technicians authorized by the manufacturer are permitted to open

the housing.

The device is grounded via the voltage supply socket.

Never insert sharp objects (small screwdrivers, wires, etc.) into the

inside of the device.

Verify that the electrical installation meets locally or nationally appli-

cable safety regulations.

Keep the ventilation slits free to ensure good air circulation.

Make sure there is at least 3.94 inches (10 cm) of space in front of the

ventilation slits of the housing.

Close all empty slots with a covering panel.

Mount the device horizontally or vertically, either as a desktop device,

in the switch cabinet (see figure 15) or on the wall (see figure 16).

If you are operating the device in a 19" switch cabinet: install

sliding/mounting rails for supporting the weight of the device.

Environment

The device may only be operated at the specified ambient temperatures

(temperature of the ambient air at a distance of up to 5 cm from the

device) and at the specified humidity.

Install the device in a location where the climatic limit values specified

in the technical data are not exceeded.

The device may only be used in environments with the pollution

degrees not exceeding the values specified in the technical data.

Qualification requirements for personnel

Qualified personnel as understood in this manual and the warning signs

are characterized by the following points:

The qualified personnel has received an appropriate training. His

training, knowledge, and experience constitute his qualification. This is

the prerequisite to connect, to ground and to label power circuits,

devices, and systems in accordance with current safety engineering

standards.

The qualified personnel are aware of the hazards associated with their

tasks.

The qualified personnel know proper measures against such hazards

to minimize the risk for themselves and for other persons.

The qualified personnel participate in regular further training.

Only trained service personnel are authorized to plug the

M1-8TP-RJ45 PoE media module into the basic device or remove from the

basic device.

6Installation MACH102

Release

09/2014

General safety instructions

This device is operated by electricity. You must follow precisely the

prescribed safety requirements for the voltage connections in this docu-

ment.

Non-observance of these safety instructions can cause material damage

and/or injuries.

Only appropriately qualified personnel should work on this device or in

its vicinity. The personnel must be thoroughly familiar with all the warn-

ings and maintenance procedures outlined in this operating manual.

The proper and safe operation of this device depends on proper

handling during transportation, proper storage and assembly, and

conscientious operation and maintenance procedures.

Never start operation with damaged components.

Only use the devices in accordance with this manual. In particular,

observe all warnings and safety-related information.

Any work that may be required on the electrical installation may only

be carried out by personnel trained for this purpose.

Please note that products recommended as accessories may have

characteristics that do not fully correspond to those of the corre-

sponding product. This may limit their possible usage in the overall

system.

Note: LED or LASER components in compliance with IEC 60825-1

(2007):

CLASS 1 LASER PRODUCT

CLASS 1 LED PRODUCT

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

ESD Guidelines

The media modules are equipped with electrostatically sensitive compo-

nents. These can be destroyed, or their life cycles reduced, by the effects

of an electrical field or by a charge equalization if the card is touched.

For this reason, the cards are packaged in a conductive ESD protective

bag on delivery. The packaging can be reused.

Installation MACH102

Release

09/2014 7

Make sure you adhere to the following protection measures for electro-

statically endangered assemblies:

Create electrical equipotential bonding between yourself and your

environment, e.g. using a wristband, which you clamp to the basic

device (knurled screw of an interface card). When the power supply

cable is connected, the basic device is grounded via the power supply

connection.

Only now do you take the card out of the conductive bag.

Outside the basic device, only store the cards in a conductive ESD

protective bag.

ESD protective field equipment is available for the safe handling of elec-

trostatically endangered assemblies.

You can find more information about electrostaticically endangered

assemblies in DIN/IEC 47 (Sec) 1330; February 1994 Edition and DIN EN

100 015.

CE marking

The labeled devices comply with the regulations contained in the following

European directive(s):

2004/108/EC (EMC)

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electromagnetic compati-

bility.

2011/65/EU (RoHS)

Directive of the European Parliament and of the Council on the restriction

of the use of certain hazardous substances in electrical and electronic

equipment.

2006/95/EC

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electrical equipment to be

used within specific voltage ranges.

In accordance with the above-named EU directive(s), the EU conformity

declaration will be at the disposal of the relevant authorities at the

following address:

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

8Installation MACH102

Release

09/2014

The product can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55022

Reliability: EN 60950-1

Warning! This is a class A device. This device can cause interference in

living areas, and in this case the operator may be required to take appro-

priate measures.

FCC note:

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interfer-

ence that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radiocommunica-

tions. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the

interference at his own expense.

Recycling note

After usage, this device must be disposed of properly as electronic waste,

in accordance with the current disposal regulations of your county, state,

and country.

Installation MACH102

Release

09/2014 9

About this manual

The following manuals are available as PDF files on the CD/DVD supplied:

Installation user manual

Basic Configuration user manual

Redundancy Configuration user manual

Reference manual for the graphical user interface

Command Line Interface user manual

The Industrial HiVision Network Management Software provides you with

additional options for smooth configuration and monitoring:

ActiveX control for SCADA integration

Auto-topology discovery

Browser interface

Client/server structure

Event handling

Event log

Simultaneous configuration of multiple devices

Graphical user interface with network layout

SNMP/OPC gateway.

Legend

The symbols used in this manual have the following meanings:

Listing

Work step

Subheading

10 Installation MACH102

Release

09/2014

1 Description

The MACH102 devices are managed Workgroup switches with up to 24 Fast

Ethernet ports and 2 Gigabit Ethernet ports. They consist of a basic device

and—depending on the device variant—up to 2 pluggable media modules.

They allow you to construct switched industrial Ethernet networks that

conform to the IEEE 802.3 and 802.3u standards using copper wires or

optical fibers in a bus or ring topology. You have the option of connecting

terminal devices and other infrastructure components via twisted-pair cables,

multi-mode F/O, and single-mode F/O. The twisted-pair ports support auto-

crossing, autonegotiation and autopolarity.

The MACH102 devices provide you with a range of switch variants. You can

set up your switch to meet your individual requirements with regard to the

transmission media type, the number of 10/100 Mbit/s ports you want (8, 16

or 24), the redundant voltage supply and the software variant.

The devices are modular network components. They are designed for the

special requirements of industrial automation. They meet the relevant

industry standards, provide very high operational reliability, even under

extreme conditions, and also long-term reliability and flexibility. The devices

work without a fan. If desired, the voltage supply can be redundant

- depending on the device variant. The basic devices are suitable for

mounting on the 19" rack and for wall mounting.

The HIPER-Ring redundancy concept enables you to quickly carry out a

reconfiguration, and also a simple configuration with only one additional

connection. The diagnosis display and the display of the operating parame-

ters and the large label areas provide a quick overview.

It can be easily managed via a Web browser, via Telnet, with a management

software product (such as Industrial HiVision), or locally on the switch (V.24

interface).

The devices provide you with a large range of features:

Redundancy functions

(Rapid Spanning Tree, Redundant Ring Structure, HIPER-Ring, Redun-

dant Coupling, Link Aggregation)

Protection from unauthorized access

Synchronized system time in the network

Network load control

Operation diagnosis

LS DA

USB V.2 4

MACH 1000

LS DA

910

PStandByRM

FAULT

R1 R2

13 14

11 12

17 18

15 16

21 22

19 20

25 26

23 24

LS DA LS DA LS DA LS DA

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hirschmann Changer

Hirschmann

Hirschmann CS30 Manuel utilisateur

Hirschmann

Hirschmann SPIDER 8TX-PRO Manuel utilisateur

Hirschmann

Hirschmann ETHERNET IP67 Instructions d'utilisation et d'installation

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann BXS Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann MAR1042 Manuel utilisateur

Hirschmann

Hirschmann PAT TRS 05 / PATB3 Guide de l'utilisateur

Hirschmann

Hirschmann SPIDER 5TX Manuel

Hirschmann

Hirschmann GREYHOUND GRS1020 Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RSPM20-4Z64Z6 Series Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS OS20 Manuel utilisateur

Hirschmann

Hirschmann SPIDER 5TX Manuel

Hirschmann

Hirschmann Power MICE Manuel utilisateur

Hirschmann

Hirschmann GREYHOUND GMM42 Manuel utilisateur

Hirschmann

Hirschmann MSP30 Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann LION-GIGA-1SX Manuel utilisateur

Hirschmann

Hirschmann MACH4000 Series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RS2-4R Manuel

Hirschmann

Hirschmann BATOne Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur