Hirschmann RS20 series Manuel utilisateur

Technical Support

[email protected]

CLI L2P

Release

7.0

05/2011

Reference Manual

Command Line Interface

Industrial ETHERNET Gigabit Switch

RS2 /RS3 /RS4 , RSB2 , MS2 /MS3 , RSR2 /RSR3 ,

MACH1 , MACH 1 , PowerMICE, MACH 4 , OCTOPUS

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the enc-

losed CD applies

The performance features described here are binding only if they have been expressly

guaranteed in the contract. This publication has been created by Hirschmann Automation and

Control GmbH according to the best of our knowledge. Hirschmann reserves the right to change

the contents of this manual without prior notice. Hirschmann can give no guarantee in respect

of the correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany 5/17/11

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538 03-0511

Content

CLI L2P

Release

7.0

05/2011 3

Content

1 Command Structure 21

1.1 Format 22

1.1.1 Command 22

1.1.2 Parameters 23

1.1.3 Values 23

1.1.4 Conventions 25

1.1.5 Annotations 26

1.1.6 Special keys 27

1.1.7 Special characters in scripts 28

1.1.8 Secrets in scripts 30

2 Quick Start up 33

2.1 Quick Starting the Switch 34

2.2 System Info and System Setup 35

3 Mode-based CLI 41

3.1 Mode-based Topology 42

3.2 Mode-based Command Hierarchy 43

3.3 Flow of Operation 45

3.4 “No” Form of a Command 47

3.4.1 Support for “No” Form 47

3.4.2 Behavior of Command Help ("?") 47

4 CLI Commands: Base 49

4.1 System Information and Statistics Commands 50

4.1.1 show address-conflict 50

4.1.2 show arp switch 50

4.1.3 show bridge address-learning 51

4.1.4 show bridge address-relearn-detect 51

4.1.5 show bridge aging-time 52

4.1.6 show bridge duplex-mismatch-detect 52

4.1.7 show bridge fast-link-detection 52

4.1.8 show bridge framesize 53

Content

4CLI L2P

Release

7.0

05/2011

4.1.9 show bridge vlan-learning 53

4.1.10bridge framesize 54

4.1.11show config-watchdog 54

4.1.12show device-status 55

4.1.13show authentication 56

4.1.14show eventlog 57

4.1.15show interface 58

4.1.16show interface ethernet 60

4.1.17show interface switchport 68

4.1.18show logging 68

4.1.19show mac-addr-table 69

4.1.20show signal-contact 70

4.1.21show slot 71

4.1.22show running-config 72

4.1.23show sysinfo 73

4.1.24show temperature 76

4.2 Debug Commands 77

4.2.1 debug tcpdump help 77

4.2.2 debug tcpdump start cpu 77

4.2.3 debug tcpdump start cpu filter 78

4.2.4 debug tcpdump stop 78

4.2.5 debug tcpdump filter show 79

4.2.6 debug tcpdump filter list 79

4.2.7 debug tcpdump filter delete 80

4.3 Management VLAN Commands 81

4.3.1 network mgmt_vlan 81

4.4 Class of Service (CoS) Commands 82

4.4.1 classofservice dot1p-mapping 83

4.4.2 classofservice ip-dscp-mapping 84

4.4.3 classofservice trust 85

4.4.4 show classofservice dot1p-mapping 86

4.4.5 show classofservice ip-dscp-mapping 87

4.4.6 show classofservice trust 88

4.4.7 vlan port priority all 89

4.4.8 vlan priority 89

4.4.9 dvlan-tunnel ethertype 90

4.4.10mode dvlan-tunnel 91

4.4.11show dvlan-tunnel 92

4.5 Link Aggregation(802.3ad) Commands 93

Content

CLI L2P

Release

7.0

05/2011 5

4.5.1 link-aggregation staticcapability 93

4.5.2 show link-aggregation brief 94

4.6 Management Commands 95

4.6.1 telnet 95

4.6.2 transport input telnet 96

4.6.3 transport output telnet 97

4.6.4 session-limit 98

4.6.5 session-timeout 99

4.6.6 bridge address-learning 99

4.6.7 bridge address-relearn detect operation 100

4.6.8 bridge address-relearn detect threshold 100

4.6.9 bridge aging-time 101

4.6.10bridge fast-link-detection 102

4.6.11bridge duplex-mismatch-detect operation 102

4.6.12bridge vlan-learning 103

4.6.13digital-input 103

4.6.14digital-output 105

4.6.15show digital-input 108

4.6.16show digital-input config 109

4.6.17show digital-input all 110

4.6.18show digital-input <slot/input> 111

4.6.19show digital-output 112

4.6.20show digital-output config 113

4.6.21show digital-output all 114

4.6.22show digital-output <slot/output> 115

4.6.23ethernet-ip 116

4.6.24network javascriptmode 116

4.6.25network mgmt-access add 118

4.6.26network mgmt-access delete 118

4.6.27network mgmt-access modify 119

4.6.28network mgmt-access operation 120

4.6.29network mgmt-access status 120

4.6.30network parms 121

4.6.31network protocol 121

4.6.32network priority 122

4.6.33profinetio 123

4.6.34serial timeout 124

4.6.35set prompt 125

4.6.36show ethernet-ip 125

4.6.37show network 126

Content

6CLI L2P

Release

7.0

05/2011

4.6.38show network mgmt-access 127

4.6.39show profinetio 128

4.6.40show serial 129

4.6.41show snmp-access 129

4.6.42show snmpcommunity 130

4.6.43show snmptrap 131

4.6.44show telnet 132

4.6.45show telnetcon 133

4.6.46show trapflags 134

4.6.47snmp-access global 135

4.6.48snmp-access version 136

4.6.49snmp-access version v3-encryption 136

4.6.50snmp-server 137

4.6.51snmp-server community 138

4.6.52snmp-server contact 139

4.6.53snmp-server community ipaddr 140

4.6.54snmp-server community ipmask 141

4.6.55snmp-server community mode 142

4.6.56snmp-server community ro 143

4.6.57snmp-server community rw 143

4.6.58snmp-server location 143

4.6.59snmp-server sysname 144

4.6.60snmp-server enable traps 145

4.6.61snmp-server enable traps chassis 146

4.6.62snmp-server enable traps l2redundancy 147

4.6.63snmp-server enable traps linkmode 148

4.6.64snmp-server enable traps multiusers 149

4.6.65snmp-server enable traps port-sec 150

4.6.66snmp-server enable traps stpmode 151

4.6.67snmptrap 152

4.6.68snmptrap ipaddr 153

4.6.69snmptrap mode 154

4.6.70snmptrap snmpversion 155

4.6.71telnetcon maxsessions 156

4.6.72telnetcon timeout 157

4.7 Syslog Commands 158

4.7.1 logging buffered 158

4.7.2 logging buffered wrap 159

4.7.3 logging cli-command 160

4.7.4 logging console 161

Content

CLI L2P

Release

7.0

05/2011 7

4.7.5 logging host 162

4.7.6 logging host reconfigure 163

4.7.7 logging host remove 163

4.7.8 logging snmp-requests get operation 163

4.7.9 logging snmp-requests set operation 164

4.7.10logging snmp-requests get severity 164

4.7.11logging snmp-requests set severity 165

4.7.12logging syslog 166

4.7.13logging syslog port 166

4.8 Scripting Commands 167

4.8.1 script apply 167

4.8.2 script delete 168

4.8.3 script list 168

4.8.4 script show 169

4.8.5 script validate 169

4.9 Device Configuration Commands 171

4.9.1 addport 171

4.9.2 adminmode 172

4.9.3 auto-negotiate 173

4.9.4 cable-crossing 174

4.9.5 auto-negotiate all 175

4.9.6 media-module remove 175

4.9.7 deleteport 176

4.9.8 deleteport all 176

4.9.9 macfilter 177

4.9.10macfilter adddest 178

4.9.11macfilter adddest all 179

4.9.12monitor session <session-id> 180

4.9.13monitor session <session-id> mode 181

4.9.14monitor session <session-id> source/destination 182

4.9.15link-aggregation 183

4.9.16link-aggregation adminmode 184

4.9.17link-aggregation linktrap 185

4.9.18link-aggregation name 186

4.9.19rmon-alarm add 187

4.9.20rmon-alarm delete 187

4.9.21rmon-alarm enable 188

4.9.22rmon-alarm disable 188

4.9.23rmon-alarm modify mib-variable 189

4.9.24rmon-alarm modify thresholds 189

Content

8CLI L2P

Release

7.0

05/2011

4.9.25rmon-alarm modify interval 190

4.9.26rmon-alarm modify sample-type 190

4.9.27rmon-alarm modify startup-alarm 191

4.9.28rmon-alarm modify rising-event 192

4.9.29rmon-alarm modify falling-event 192

4.9.30set garp timer join 193

4.9.31set garp timer leave 194

4.9.32set garp timer leaveall 195

4.9.33set gmrp adminmode 196

4.9.34set gmrp interfacemode 197

4.9.35set gmrp interfacemode 198

4.9.36set gmrp forward-all-groups 199

4.9.37set igmp 200

4.9.38set igmp 201

4.9.39set igmp aging-time-unknown 202

4.9.40set igmp automatic-mode 202

4.9.41set igmp forward-all 203

4.9.42set igmp forward-unknown 204

4.9.43set igmp static-query-port 205

4.9.44set igmp groupmembershipinterval 206

4.9.45set igmp interfacemode 207

4.9.46set igmp lookup-interval-unknown 208

4.9.47set igmp lookup-resp-time-unknown 208

4.9.48set igmp maxresponse 209

4.9.49set igmp querier max-response-time 210

4.9.50set igmp querier protocol-version 210

4.9.51set igmp querier status 211

4.9.52set igmp querier tx-interval 211

4.9.53set igmp query-ports-to-filter 212

4.9.54selftest ramtest 213

4.9.55selftest reboot-on-error 213

4.9.56show garp 214

4.9.57show gmrp configuration 215

4.9.58show igmpsnooping 217

4.9.59show mac-filter-table gmrp 219

4.9.60show mac-filter-table igmpsnooping 220

4.9.61show mac-filter-table multicast 221

4.9.62show mac-filter-table static 222

4.9.63show mac-filter-table staticfiltering 223

4.9.64show mac-filter-table stats 224

4.9.65show monitor session 225

Content

CLI L2P

Release

7.0

05/2011 9

4.9.66show port 226

4.9.67show link-aggregation 227

4.9.68show rmon-alarm 229

4.9.69show selftest 229

4.9.70show storm-control 230

4.9.71show storm-control limiters port 231

4.9.72show vlan 231

4.9.73show vlan brief 233

4.9.74show vlan port 234

4.9.75show voice vlan 235

4.9.76show voice vlan interface 236

4.9.77shutdown 237

4.9.78shutdown all 238

4.9.79snmp trap link-status 239

4.9.80snmp trap link-status all 240

4.9.81spanning-tree bpdumigrationcheck 241

4.9.82speed 242

4.9.83storm-control broadcast 243

4.9.84storm-control egress-limiting 244

4.9.85storm-control ingress-limiting 244

4.9.86storm-control ingress-mode 244

4.9.87storm-control broadcast (port-related) 245

4.9.88storm-control egress-limit 245

4.9.89storm-control ingress-limit 245

4.9.90storm-control ingress-mode 246

4.9.91storm-control flowcontrol 247

4.9.92storm-control flowcontrol per port 248

4.9.93vlan 249

4.9.94vlan0-transparent-mode 250

4.9.95vlan acceptframe 251

4.9.96vlan database 252

4.9.97vlan ingressfilter 253

4.9.98vlan name 254

4.9.99vlan participation 255

4.9.100vlan participation all 256

4.9.101vlan port acceptframe all 257

4.9.102vlan port ingressfilter all 258

4.9.103vlan port pvid all 259

4.9.104vlan port tagging all 260

4.9.105vlan pvid 261

4.9.106vlan tagging 262

Content

10 CLI L2P

Release

7.0

05/2011

4.9.107voice vlan (Global Config Mode) 263

4.9.108voice vlan <id> 264

4.9.109voice vlan dot1p 265

4.9.110voice vlan none 265

4.9.111voice vlan untagged 266

4.9.112voice vlan auth 266

4.10 User Account Management Commands 267

4.10.1disconnect 267

4.10.2show loginsession 268

4.10.3show users 269

4.10.4users defaultlogin 270

4.10.5users login <user> 271

4.10.6users access 272

4.10.7users name 273

4.10.8users passwd 274

4.10.9users snmpv3 accessmode 275

4.10.10users snmpv3 authentication 276

4.10.11 users snmpv3 encryption 277

4.11 System Utilities 279

4.11.1address-conflict 279

4.11.2cablestatus 280

4.11.3clear eventlog 280

4.11.4traceroute 280

4.11.5clear arp-table-switch 281

4.11.6clear config 282

4.11.7clear config factory 282

4.11.8clear counters 282

4.11.9clear hiper-ring 283

4.11.10clear igmpsnooping 283

4.11.11clear mac-addr-table 284

4.11.12clear pass 284

4.11.13clear link-aggregation 285

4.11.14clear signal-contact 285

4.11.15clear traplog 286

4.11.16clear ring-coupling 286

4.11.17clear vlan 287

4.11.18config-watchdog 287

4.11.19copy 288

4.11.20device-status connection-error 296

4.11.21device-status monitor 296

Autres manuels pour RS20 series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hirschmann Changer

Hirschmann

Hirschmann SPIDER 8TX-PRO Manuel utilisateur

Hirschmann

Hirschmann RSP 20 Manuel utilisateur

Hirschmann

Hirschmann GREYHOUND GRS1020 Manuel utilisateur

Hirschmann

Hirschmann RSPM20-4Z64Z6 Series Manuel utilisateur

Hirschmann

Hirschmann PAT TRS 05 / PATB3 Guide de l'utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RSP 25 Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann MACH102 Series Manuel utilisateur

Hirschmann

Hirschmann GigaLION-24TP Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS 8M Series Manuel utilisateur

Hirschmann

Hirschmann Dragon PTN Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS OS20 Manuel utilisateur

Hirschmann

Hirschmann SPIDER PL Manuel utilisateur

Hirschmann

Hirschmann RSPE 30 Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RS20-0800B Manuel utilisateur

Hirschmann

Hirschmann RH1-CX+ Manuel utilisateur

Hirschmann

Hirschmann MACH4000 Series Manuel utilisateur

Hirschmann

Hirschmann MSM20 Manuel utilisateur

Hirschmann

Hirschmann PowerLION-24TP Manuel utilisateur

Hirschmann

Hirschmann MAR1042 Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur