FS S3410 Series Manuel utilisateur
S3410 Series Switches
Quick Start Guide
MANAGED L2+ GIGABIT POE+
SWITCHES
Introduction
Accessories
S3410-48TS-P
S3410-24TS-P
S3410-10TF-P
Thank you for choosing S3410 Series Managed PoE+ Switches. This guide is designed to familiarize
you with the layout of the switch and describes how to deploy the switch in your network.
Grounding Cable x1
Power Cord x1
M4 Screw x6
Rubber Pad x4
Mounting Bracket x2
PoE
STATUS M1 M2 PWR1PWR2 PoE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24 25 2623
Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad
CONSOLE
SFP+
S3410-24TS-P PoE+
S3410-10TF-P
Cable Clamps x1
Hardware Overview
NOTE: S3410 series PoE+ switches have dust plugs delivered with them. Keep the dust
plugs properly and use them to protect idle optical ports.
S3410-10TF-P
Grounding Cable x1
Power Cord x2
M4 Screw x8
Rubber Pad x4
Mounting Bracket x2
S3410-24TS-P/S3410-48TS-P
Front Panel Ports
Ports Description
RJ45
SFP
CONSOLE
10/100/1000BASE-T ports for Ethernet connection
SFP ports for 1G connection
An RJ45 console port for serial management
CONSOLE RJ45 SFP
USB
CONSOLE
Reserved
An RJ45 console port for serial management
S3410-48TS-P
CONSOLE
USB RJ45 RJ45/SFP Combo
SFP+
Ports Description
RJ45
RJ45/SFP Combo
SFP+
10/100/1000BASE-T ports for Ethernet connection
One RJ45 port and one SFP slot, with one port active at a time
SFP+ ports for 1/10G connection
S3410-24TS-P
CONSOLE
USB RJ45 RJ45/SFP Combo SFP+
PoE
STATUS M1 M2 PWR1PWR2 PoE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24 25 2623
Green=1000M Yellow=10/100M On=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=OverLoad
CONSOLE
SFP+
S3410-24TS-P PoE+
S3410-10TF-P
Front Panel Buttons
S3410-24TS-P
PoE
STATUS M1 M2 PWR1 PWR2 PoE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24 25 2623
Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad
CONSOLE
SFP+
S3410-24TS-P PoE+
PoE
PoE RESET
S3410-48TS-P
PoE
Button Description
PoE
RESET
Switch the display mode between PoE mode and switch mode.
Restart: Press and hold the RESET button for more than ve seconds,
and then wait for ten seconds.
Button Description
PoE Switch the display mode between PoE mode and switch mode.
S3410-10TF-P
Back Panels
S3410-24TS-P/S3410-48TS-P
Dual Power Supplies
Expansion Module Slot Grounding Point
Front Panel LEDs
Power Supply
Cable Clamps Holes
Grounding Point
S3410-10TF-P
STATUS
PoE RJ45
PoE(1-8) SFP
1
Power
2
Input
Module1 Module2
Output
Input
Output
LEDs DescriptionStatus
STATUS
O Switch is not receiving power.
System is being initialized. Continuous blinking indicates
errors.
The switch is operational.
Switch is faulty.
Temperature warning, check the working environment of
the switch immediately.
Blinking Green
Solid Green
Solid Yellow
Solid Red
S3410-24TS-P
PoE
STATUS M1 M2 PWR1 PWR2 PoE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24 25 2623
Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad
CONSOLE
SFP+
S3410-24TS-P PoE+
RJ45
PoE(1-24)
STATUS
M1
M2
PWR1
PoE
PWR2
SFP
SFP+
S3410-48TS-P
RJ45
PoE(1-48) SFP
SFP+STATUS
M1
M2
PWR1
PoE
PWR2
M1/M2
O
Solid Green
PWR1/PWR2
O
Solid Red The power module is in place but the AC power cord or
switch is abnormal.
The power module is not in place.
There is no expansion module or the expansion module is
not correctly installed.
The expansion module is correctly installed.
Solid Green The power supply is operational.
Solid Green
Solid Yellow
PoE
RJ45
O
Indicates the PoE state.
The port is not connected.
Solid Green The port is connected at 1000 Mbps.
Blinking Green The port is receiving or transmitting trac at 1000 Mbps.
Solid Yellow The port is connected at 10/100 Mbps.
Blinking Yellow The port is receiving or transmitting trac at 10/100 Mbps.
Indicates the switching state.
LEDs DescriptionStatus
SFP
O
Solid Green
Solid Yellow
Solid Yellow
Blinking Yellow
O The port is not connected.
The port is not connected.
Solid Green The port is connected at 1000 Mbps.
Blinking Green
O
Solid Green
Blinking Green
The port is receiving or transmitting trac at 1000 Mbps.
The port is connected at 100 Mbps.
The port is receiving or transmitting trac at 100 Mbps.
PoE (1-8)
PoE (1-24)
PoE (1-48)
PoE is not enabled.
PoE is enabled. The port is operational.
The port has a PoE fault of overload.
SFP+
The port is connected.
The port is receiving or transmitting trac at 10 Gbps.
Installation Requirements
Before you begin the installation, make sure that you have the followings:
Category 5e or higher RJ-45 Ethernet cables, ber optical cables and console cable for
connecting network devices.
Phillips screwdriver.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Site Environment:
Do not operate it in an area that exceeds an ambient temperature of 50°C.
The installation site must be free from leaking or dripping water, heavy dew, and humidity.
Ensure rack and working platforms are well earthed.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Be sure that the switch is level and stable to avoid any hazardous conditions.
Do not install the equipment in a dusty environment.
PoE
Status M1 M2 PWR1 PWR2 PoE
1 2
2
3456 7 8 9 10 11 12
12 14 24
13 14 15 16 17 18 19 20 21 22 23 24
Green=1000M Yellow=10/100MOn=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=Over Load
Console
25F 26F 27F
RG-S2910-24GT2XS-UP-E
SFP+
Desk Mounting
1. Attach four rubber pads to the bottom.
2. Place the chassis on a desk.
PoE
STATUS
M1 M2 PWR1 PWR2 PoE
12345678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24 25 26
23
Green=1000M Yellow=10/100M On=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=OverLoad
CONSOLE
SFP+
S3410-24TS-P
PoE+
Mounting the Switch
1. Secure the mounting brackets to the two sides of the switch with the supplied M4 screws.
Rack Mounting
RG-S2910-24GT2XS-UP-E
Autres manuels pour S3410 Series
2
Ce manuel convient aux modèles suivants
6
Table des matières
Autres manuels FS Changer
FS
FS N Series Manuel utilisateur
FS
FS S3910 Series Manuel utilisateur
FS
FS S5810 Series Manuel utilisateur
FS
FS S1900-24T Manuel utilisateur
FS
FS S3700-24T4F Mode d’emploi
FS
FS S3200 Series Manuel utilisateur
FS
FS S3700-24T4F Mode d’emploi
FS
FS S5500-48T8SP Manuel utilisateur
FS
FS S3700-24T4F Manuel utilisateur
FS
FS IES5100-24TF Manuel utilisateur
FS
FS S5900-24S4T2Q Guide rapide
FS
FS IES3110 Series Manuel utilisateur
FS
FS S5860-48SC Manuel d'utilisation
FS
FS MANAGED L2 Manuel utilisateur
FS
FS S3950-4T12S-R Manuel utilisateur
FS
FS S5850-48S8C Manuel utilisateur
FS
FS S3900 Series Manuel utilisateur
FS
FS S1900-8TP Manuel utilisateur
FS
FS TAP Series Manuel utilisateur
FS
FS S3700-24T4F Mode d’emploi
