Flashforge Finder 3 Manuel utilisateur

This guide is only applicable to FLASHFORGE Finder 3 3D printer

本手册仅适用于闪铸科技发现者3 3D打印机

中文P20

用户使用手册

USER GUIDE

EN/CN-A01 Finder 3 发现者3

Content

Notes

Legal Statement

Equipment Parameters

Unpacking

Chapter 1 Equipment Introduction

1.1 - Product Introduction

1.2 - Kit Contents

Chapter 2 Preparation for Printing

2.1 - Assemble filament

2.2 - Build Plate

2.3 - Power On

2.4 - Leveling Build Plate

2.5 - Loading Filament

2.6 - Software Installation

Chapter 3 First Print

3.1 - Print

3.2 - Unloading Filament

3.3 - Wi-Fi Connection

3.4 - Connect Printer by Wi-Fi

3.5 - Firmware Upgrade

3.6 - Printing Notice

Chapter 4 FAQ

Chapter 5 Support and Service

Do not make any modiﬁcations to the printer. To avoid personal injury or property

damage please ensure your operation followed by the Manual.

Dress properly. Do not wear loose clothing or jewelry. Keeping your hair, clothing and

gloves away from moving parts.

Do not directly touch the nozzle and build plate to avoid high-temperature burn.

Do not expose the printer in ﬂammable liquid, gas or dust environment (The high

temperature generated by operating printer may react with dust, liquid, and ﬂamma-

ble gas in the air and cause ﬁre).

Do not put the printer on a shaking place. It may aﬀect the printing quality.

Children and untrained personnel are not allowed to operate the printer alone.

Operate the printer in a well-ventilated environment. Some materials may emit odors

during the printing process.

Do not manually move the nozzle or printing platform while booting up, lest printer

damage.

Never use the printer for illegal activities.

Never use the printer to make any food storage.

Never put the printed model into mouth.

Lower the build plate before loading/unloading ﬁlament. The distance between the

nozzle and build plate should be at least 50 mm.

Ensure regular maintenance for the printer; use dry cloth to remove dust and

adhered residues.

10.

11.

12.

13.

Notes

The user has no right to make any modiﬁcation to this user guide.

Flashforge will not be responsible for any safety accidents caused by disassembly or

modiﬁcation of the equipment by the customer. No one is allowed to modify or

translate this guide without the permission of Flashforge.

This guide is protected by copyright, and Flashforge reserves the right of ﬁnal

interpretation of this guide.

Flashforge reserves the right to modify the guide due to subsequent equipment

upgrades.

First Edition (January 2022)

Legal Statement

Model

Print volume

Forming technology

Extruder quantity

Layer thickness

Nozzle diameter

Print precision

Filament

File format

Connectivity

Slicing software

Power speciﬁcation

Total power

Hotbed temperature

Nozzle temperature

Resume printing function

Filament detection sensor

Screen

Language switch

Supports(OS)

Print speed

Position precision

Output ﬁle

Finder 3

190*195*200mm

FDM

0.1mm-0.4mm

Standard 0.4mm

±0.2mm

φ1.75mm PLA / PETG / TPU

stl / obj / amf /3mf / fpp / bmp /png / jpg / jpeg

Internal memory printing / USB stick printing /W i-Fi connection printing

FlashPrint / Cura / Simplify 3D

Input AC 115/230V 50/60Hz Outpu DC 24V

350W

≤110℃

≤260℃

Yes

4.3'' colorful touchscreen

Chinese / English / Japanese / French / Spanish / German

Windows 7/10 / Mac OS

≤180mm/s, 50-80mm/s normally

Z-axis 0.0025mm, X/Y-axis ±0.011mm

.gx / .g / .gcode

Equipment Parameters

Open the box, take out the user manual and the USB ﬂash disk.

Remove the foam.

Lift the printer and put it on the desk, then take Finder 3 out of the plastic bag.

Remove the top foam, there should be a power cable included.

Take out the foam under nozzle.

Hold the platform and lift it carefully to remove the foam below it.

Discard the protective tapes all around.

Cut the cable ties which for ﬁxing X-axis and Y-axis synchronous belt.

Cut the cable ties that used to hold the rods in place.

Cut the cable ties that used to hold the platform. Discard the protective tape around

it.

You’ve unpacked your printer. Please keep the kit and packing for future use.

10.

11.

Unpacking

第一章设备简介

Chapter 1 Equipment Introduction

1.1 Product Introduction

13.

1 7.

10.

14.

11.

15.

12.

16.

Y-axis Guide Rail

Glass platform

USB Stick Input

Turbofan Baﬄe

Filament detect sensor

X-axis Guide Rail

Clip

Power Voltage Switch

Power Switch

Z-axis Guide Rail

Leveling Nut

LED Light

Power Input

Limit position assembly

Touch Screen

Nozzle

Spool installation port

14 15

Power Cable

Nozzle

Needle

User Guide

Remove Tool

3D Printer

Material Rack

Glue

Wrenches and Screwdrivers Grease Flexible Spring Sheet

Filament

USB Flash Disk

1.2 Kit Contents

Thisguide is only applicable to FLASHFORGE Finder 3 3Dprinter

本手册仅适用于闪铸科技发现者3 3D打印机

中文P20

用户使用手册

USER GUIDE

CN/EN-A01 Finder 3 发现者3

第一章设备简介

Chapter 2 Preparation for Printing

2.1 Assemble filament

Install the material rack on the back of printer.1.

Insert the ﬁlament into the intake, pull out the PTFE tube from extruder; Then press the

handle to push ﬁlament into ﬁlament feeding roller.

Press the handle

Plug in the power cord and toggle the switch to turn on the power. Do not disconnect the

cables when Finder 3 is powered on.

Attention

Damage might occur if voltage setting

is incorrect. Make sure the current input

voltage matches to your local power

supply (115/230V).

Plug in power cord and turn power

switch to 1 to turn it on.

2.2 Build Plate

Finder 3 is installed with the glass platform by default, while users can also use the

ﬂexible removable platform.

Glass platform: The bottom is ﬂatter, but the removal of the model requires a scraper; If

the glass platform is used when the ambient temperature is low, it is recommended to

apply glue on it before printing to increase the adhesion.

Flexible removable platform: It adopts magnetic adsorption, thus the model can be

easily removed by removing the ﬂexible steel plate and then bending it.

2.3 Power On

If you switch from the glass platform to the flexible removable platform

plate, it is necessary to perform leveling and calibration.

Note

Installation method of the flexible removable

platform plate:

Remove the glass platform.

Stick the magnet above the heating plate.

Then the flexible steel plate can be

absorbed on the magnet.

Table des matières

Autres manuels Flashforge Imprimante 3D

Flashforge

Flashforge THOR500T Manuel utilisateur

Flashforge

Flashforge Adventurer 4 Manuel utilisateur

Flashforge

Flashforge DREAMER Manuel utilisateur

Flashforge

Flashforge Guider 2 Manuel utilisateur

Flashforge

Flashforge ADVENTURER 3 V2 Manuel utilisateur

Flashforge

Flashforge AD1 Manuel utilisateur

Flashforge

Flashforge DREAMER Manuel utilisateur

Flashforge

Flashforge Guider Manuel utilisateur

Flashforge

Flashforge CN/EN-A01 Manuel utilisateur

Flashforge

Flashforge Adventurer 5M Pro Manuel utilisateur

Flashforge

Flashforge Adventurer 5M Manuel utilisateur

Flashforge

Flashforge Inventor 2 Manuel utilisateur

Flashforge

Flashforge Creator3 Manuel utilisateur

Flashforge

Flashforge Creator Pro Manuel utilisateur

Flashforge

Flashforge Creator Pro Manuel utilisateur

Flashforge

Flashforge Creator Pro Manuel utilisateur

Flashforge

Flashforge Guider IIs Manuel utilisateur

Flashforge

Flashforge Hunter Manuel utilisateur

Flashforge

Flashforge Cura Manuel

Flashforge

Flashforge Inventor Manuel utilisateur

Flashforge

Flashforge Guider II Manuel utilisateur

Flashforge

Flashforge Creator Manuel d'instructions

Flashforge

Flashforge Finder Instructions d'installation et d'entretien

Flashforge

Flashforge Finder Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur