FIC PAK-2005 Manuel utilisateur

PAK-2005

MAINBOARD

USER’S MANUAL

DOCUMENT No. : 16069

MANUAL REVISION : A1

RELEASE DATE : December, 1997

PRODUCT PART No.: 25–10813–01

PAK-2005

Handling Precautions

WARNING:

1. Static electricity may cause damage to the integrated circuits on the

mainboard.

Before handling any mainboard outside of its protective packaging,

ensure that there is no static electric charge in your body.

2. There is a danger of explosion if the battery is incorrectly replaced.

Replace only with the same or an equivalent type recommended by

the manufacturer.

3. Discard used batteries according to the manufacturer’s instructions.

Observe the following basic precautions when handling the mainboard or

other computer components:

nWear a static wrist strap which fits around your wrist and is connected to

a natural earth ground.

nTouch a grounded or anti-static surface or a metal fixture such as a water

pipe.

nAvoid contacting the components on add-on cards, boards and modules

and with the “gold finger” connectors plugged into the expansion slot. It

is best to handle system components by their mounting bracket.

The above methods prevent static build-up and cause it to be discharged

properly.

Trademarks™

All trademarks mentioned in this manual are mentioned for identification

purposes only. Product names appearing in this manual may or may not be

registered trademarks or copyrights of their respective companies.

Intel and Pentium are registered trademarks of Intel Corporation.

Windows and MS-DOS are registered trademarks of Microsoft Corporation.

No part of this manual, including the product and software may be

reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language in any form by any means without the express

written permission of FIRST INTERNATIONAL COMPUTER, INC.

(hereinafter referred to as FIC) except documentation kept by the purchaser

for backup purposes.

Notice

PAK-2005 Mainboard Manual

PAK-2005

Specifications are subject to change without notice. FIC provides this manual

“as is” without warranty of any kind, either express or implied, including but

not limited to the implied warranties or conditions of salability or fitness for

a particular purpose. In no event shall FIC be liable for any loss or profits,

loss of business, loss of use or data, interruption of business, or for indirect,

special, incidental, or consequential damages arising from any defect or error

in this manual or product. FIC may revise this manual from time to time

without notice.

For the previous or updated manuals, BIOS, drivers, or product release

information you may visit FIC’s homepage at: http://www.fic.com.tw/.

reserved.

Chapter 1 Overview

Main Features........................................................................................ 2

Advanced Features................................................................................. 3

Package Checklist.................................................................................. 5

Mainboard Layout (with onboard COM1 and COM2 ports).................... 6

Mainboard Layout (with onboard USB port)........................................... 7

This User’s Manual................................................................................ 8

Something Interesting............................................................................. 8

The BIOS Setup Utility................................................................. 9

IRQ Functionality.......................................................................... 9

DMA Channels of ISA Cards ........................................................ 10

Enhanced IDE............................................................................... 10

Infrared Connections..................................................................... 10

Highly Convenient Integrated I/O Connectors................................ 11

Chapter 2 Installation Procedures

Mainboard Layout (with onboard COM1 and COM2 ports).................... 14

Mainboard Layout (with onboard USB port)........................................... 15

1). Set System Jumpers .......................................................................... 16

Jumpers ........................................................................................ 16

Clear Password: CPW............................................................ 17

Flash EPROM Type Selection: EP1, EP2............................... 17

CPU to SRAM Data Transaction Mode Selection: SRAM1 .... 18

VGA Selection: VGA1........................................................... 18

2). Install System RAM Modules............................................................ 19

DRAM Memory............................................................................ 19

DRAM Module Configuration....................................................... 20

Install SIMMs............................................................................... 21

Remove SIMMs............................................................................ 22

Install DIMMs .............................................................................. 22

Remove DIMMs............................................................................ 23

Cache Memory.............................................................................. 23

Option 1: 512KB Cache SRAM ............................................. 23

Option 2: 256KB Cache SRAM ............................................. 24

Option 3: 512KB Cache SRAM ............................................. 24

Option 4: 1MB Cache SRAM ................................................ 25

Table of Contents

PAK-2005 Mainboard Manual

3). Install the Central Processing Unit (CPU) ......................................... 25

Select Frequency and Voltage...................................................... 27

CPU to Bus Frequency Ratio: FREQ1, FREQ2, FREQ3......... 27

CPU External Clock (Bus) Frequency: CLK1, CLK2, CLK3 .. 28

Intel Pentium CPUs............................................................... 29

Frequency......................................................................... 29

Voltage............................................................................. 30

AMD-K5/K6 CPUs................................................................ 31

Frequency......................................................................... 31

Voltage............................................................................. 32

Cyrix 6x86/6x86MX / IBM 6x86/6x86MX CPUs .................. 33

Frequency......................................................................... 33

Voltage............................................................................. 34

4). Install Expansion Cards .................................................................... 35

Assigning IRQs for Expansion Cards ........................................... 37

Assigning DMA Channels for ISA Cards ..................................... 37

5). Connector Cables and Power Supply................................................. 38

Connectors .................................................................................. 38

Floppy Diskette Drive Connector (34-pin block): FLOPPY .... 38

Infrared Connector: IR ........................................................... 39

Serial Port Connectors (Two 9-pin Male): COM1, COM2...... 39

Serial Port and Serial Connector: COM1, COM2_E............... 40

Standard Power Connector: POWER...................................... 40

IDE HDD Device Connector: PRIMARY, SECONDARY....... 41

Universal Serial Bus Port: USB (with onboard USB port) ...... 42

Universal Serial Bus Connector: USB.................................... 42

PS/2 Keyboard Connector (6-pin Female): PS2_KB............... 43

PS/2 Mouse Connector (6-pin Female): PS2_MS ................... 43

Remote Power Supply Connector: RPW_CON1 ..................... 44

CPU Fan Connector: CHASIS FAN, CPU_FAN..................... 45

Front Panel Block Connector: F_PNL .................................... 46

LAN System Wakeup Connector: LAN_WAKE ..................... 47

System Chassis Open Alarm Connector: CHASIS .................. 48

VGA Feature Connector: FEATURE...................................... 48

VGA Connector: VGA........................................................... 49

Parallel Printer Connector (25-pin Female): PRINTER........... 49

Power Connection Procedures ................................................................ 50

Powering Off the Computer.................................................................... 50

Table Of Contents

iii

Chapter 3 Setting BIOS Feature

Main CMOS Setup................................................................................. 52

Load Defaults.............................................................................. 52

Standard CMOS Setup........................................................................... 52

Auto Detection of Hard Disks on Bootup ..................................... 54

BIOS Features Setup.............................................................................. 55

Chipset Features Setup........................................................................... 58

Power Management Setup...................................................................... 60

PNP and PCI Setup ................................................................................ 63

Load BIOS Defaults............................................................................... 64

Load Setup Defaults............................................................................... 65

Integrated Peripherals ............................................................................ 65

Supervisor Password and User Password................................................ 68

IDE HDD Auto Detection....................................................................... 69

Save & Exit Setup.................................................................................. 70

Exit Without Saving............................................................................... 70

PAK-2005 Mainboard Manual

— This Page Intentionally Left Blank —

Overview

Based on the new highly integrated VIA VT82C590 VP2, the PAK-2005 mainboard

combines blistering Intel Pentium® processor performance with support for

intelligent diagnostic and power management features to provide a powerful and

versatile LPX-size platform for leading-edge PC ‘97 compliant multi-media

systems.

With its switching voltage regulator, the PAK-2005 runs a complete range of Intel

Pentium® processors, including the Intel Pentium processor with MMX™

technology, as well as the AMD-K5™/-K6™ and Cyrix/IBM 6x86™/6x86MX™

processors. For added power and performance, the PAK-2005 takes up to 1MB

Pipeline Burst Level II cache and up to 256MB DRAM via two 72-pin SIMM

sockets and two 168-pin DIMM sockets which accepts high-speed EDO, and

lightning-fast SDRAM memory types.

Built on the highly concise LPX form factor, the PAK-2005 comes with a full set of

I/O features conveniently integrated on the rear I/O panel. The board also has an

integrated PCI Bus Master Enhanced IDE controller with support for the new Ultra

DMA/33 protocol, which doubles ATA-2 Hard Disk Drive data transfer rates to

33MB/sec while maintaining full backwards compatibility with existing PIO Mode

3, PIO Mode 4 and DMA Mode 2 devices.

Fully compliant with the Microsoft PC’97 standard at both the hardware and BIOS

levels, the PAK-2005 comes with support for intelligent Hardware Monitoring and

DMI features which continuously check the thermal status of your system and

reduce the cost of ownership through improved manageability.

The S3® Trio64 V2/DX™ VGA controller offers 135MHz output pixel data rates

with non-interlaced screen resolutions of up to 1280x1024x256 colors at 75Hz

(2MB video RAM). The S3 Trio64 enables the system to have a higher performance

under Windows and other GUI (Graphics User Interface) environments.

This chapter gives a you a brief overview of the PAK-2005 mainboard. In addition

to basic information on the board's main components and features, it also provides

advice on how to upgrade and expand it. For updated BIOS, drivers, or product

release information, please visit FIC's home page at: http://www.fic.com.tw.

Congratulations on your decision to adopt the PAK-2005 mainboard. With its high-

speed EISA local bus architecture and ultra-fast I/O connections, the PAK-2005

provides the ultimate solution for optimizing the performance of your high-end

system.

Chapter 1

PAK-2005 Mainboard Manual

Main Features

The PAK-2005 mainboard comes with the following high-performance features:

nEasy Installation

Award BIOS with support for Plug and Play, auto detection of Hard Drive and IDE

features, MS Windows 95®, and Windows NT® compatible to make setup of hard

drives, expansion cards, and other devices virtually automatic.

nFlexible Multi-Processor/Multi-Speed Support

Onboard 321-pin ZIF socket and switching voltage regulator supports a complete

range of leading-edge processors:

Intel Pentiumwith MMXtechnology (P55C) 166/200/233 MHz processors.

Intel Pentium(P54C/P54CS) 90/100/120/133/150/166/200 MHz processors.

Cyrix6x86PR133+ - PR166+ (Rev 2.7 and later) processors.

Cyrix6x86MXPR166-PR266 processors.

AMD-K590-200MHz processors.

AMD-K6166-300MHz processors.

nVarious External Bus and CPU to Bus Frequency Ratio Support

The mainboard supports the Bus frequency for 55 / 60 / 66.6 MHz and CPU to Bus

frequency ratio of 1x / 1.5x / 1.75x / 2x / 2.5x / 3x / 3.5x / 4x / 4.5x. (Refer to

Select Frequency and Voltage of Chapter 2 for more information.)

nLeading Edge Chipset

VIA VT82C590 VP2 chipset, including a CPU interface controller, advanced cache

controller, integrated DRAM controller, synchronous EISA bus controller,

integrated power management unit.

nUltra-fast Level II Cache

Supports 256KB/512KB/1MB (onboard 512KB) synchronous Pipelined Burst

SRAM direct-mapped write-back cache memory.

nVersatile Main Memory Support

Accepts up to 256MB RAM in two banks using 72-pin Fast Page Mode (FPM) or

Extended Data Out (EDO) SIMMs of 4, 8, 16, 32, 64MB or using two 168-pin

3.3Volt DIMMs for SDRAM or EDO memory modules up to 128MB. SIMMs and

DIMMs cannot be used at the same time.

nEISA Expansion Slot

One 32-bit EISA expansion slot provides all the room you need to install a full

range of add-on cards by first inserting a riser card.

nUSB Support

Onboard support for two Universal Serial Bus connectors via a plug-in connector.

Overview

nEnhanced Master Mode PCI IDE Controller

Comes with an onboard Ultra DMA/33 Bus Master IDE controller with two

connectors that supports four IDE devices such as Hard Disk via two channels for

high speed (33MB/sec) data throughput. This controller supports PIO Modes 3 and

4, and Bus Master IDE DMA Mode 2 for optimized system performance.

nSuper Multi I/O

Integrated SMC FDC37C932 Plug and Play Super I/O chipset features two high-

speed 16550A UART compatible serial ports, one EPP/ECP capable parallel port,

one IR port, and one Floppy Disk Drive connector. UART2 can also be directed

from COM2 to the Infrared Module for wireless connections.

nOnboard IrDA Connector

An optional infrared port module for wireless interface is available.

Advanced Features

This mainboard comes equipped with the most advanced new features that not only

optimize the performance of the latest processors but also enhance the

manageability, power management capabilities, and user-friendliness of your

system. This section provides detailed information on these features, and how they

are implemented on the mainboard.

nOptimized Intel MMX™ Performance

The mainboard utilizes the advanced features of the VIA VT82C590 VP2 to

optimize the unrivaled performance of the Intel Pentium® processor with MMX™

technology, allowing you to enjoy a richer video, audio, digital imaging and

communications experience from the latest generation of multimedia software. To

provide you with additional flexibility, the mainboard also supports other leading-

edge processors featuring Intel’s MMX™ technology, including the AMD-K6™

processor.

nLightning-Fast SDRAM Performance

The mainboard supports the new generation of lightning-fast SDRAM

(Synchronous Dynamic Random Access Memory) via its two onboard 168-pin

DIMM sockets. SDRAM delivers an added boost to overall system performance by

increasing the CPU-to-memory data transfer rate to 528MB/sec compared to

264MB/sec for conventional EDO DRAM. SDRAM performance on the PAK-2005

is further boosted by the mainboard’s integrated IC controller, which optimizes the

memory timing settings.

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur